C W Wood Machinery Inc            This graphic means item confirmed as in stock

3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email: info@cwwood.com
Web: www.cwwood.com

0A1802 AIR COMPRESSOR ACCESSORIES
Fab Rite Vertical Air Tank,App. 400 Gallons,125 P.S.I. Max Pressure. [22716]
Air tank vert.App. 600 Gallon,Year 1996,150 PSI. at 450%F. [23155]
Air tank vertical, [23154]
Air tank vert.,Silvan Ind. Inc.,Year 2002,4' x 12' Tank Size,150 PSI Max. [23156]
Vert. air tank [23087]

0A2140 AIR COMPRESSORS, DRYERS, REFRIGERATED
200 CFM, 300 PSI, Pioneer, No. R200A MGA, (2) Filters, (3) Valve, 1988 [19113]
GENERAL Pneumatics Air Dryer,Md.TK800W,800 CFM Cap.,150 PSI. [23115]
175 PSI, INGERSOLL-RAND, No. TM1900T, [22596]
EURO DRY ENERGY, No. DE114, 1997, [22448]

0A2450 AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE
495 CFM, 105 PSI, GARDNER-DENVER, 100 HP, No. ECPQMC, Air Cooled, 1988, Low Hour [21635]
KALSER,125 Hp.,585 CFM.,Rotary Screw,Water Cooled, [23114]
KAISER, No. V71261, 100 HP, 1993, [22012]
QUINCY, 30 HP, [23253]
125 PSI, SULLAIR, No. 10-30H, 25 HP, 120 Gallon Tank, Air Cooled, 1990 [23065]

0A2570 AIR COMPRESSORS, TANK MOUNTED
5 Hp. Speedaire,Vertical tank, 200 PSI, 60/3 phase [14827]
5 HP, [22740]
10 HP, CAMPBELL-HAUSFELD, Horiz. Tank [20798]
25 HP,Kellogg-American [23113]

0A7050 AUTOMATIC CHUCKERS, MULT. SPDL.
GOSS-DELEEUW, No. 1-2-3, [23100]

0B0404 BALANCERS
500 Lb., BALANCE TECHNOLOGY, No. UD500PS, 1"-10" Dia. Range, 0-2000 RPM, 1.5 HP [22653]

0B0604 BALERS, PAPER & NON-FERROUS METALS
CRAM-A-LOT, No. 60, Hydraulic, Paper, Vertical, 60" Bale, Nice [22063]

0B1365 BATTERY CHARGERS
CUMMINS, POWER COMMAND, [22810]
CUMMINS, POWER COMMAND, [22813]
CUMMINS, POWER COMMAND, [22819]
CUMMINS, Power Command [22761]
CUMMINS, Powwer Command [22762]
Battery Charger: Deka, Mdl.12C3-880, 12 Cell, 24 Volt, 208-240/480/60/3 input [15474]
KOHLER, No. D-292865, Float/Equalize, 26 Volt, 10 Amp, 1 Phase, New In Box [22804]
KOHLER, No. D-292865, Float/Equalize, 26 Volt, 10 Amp., 1 Phase, New In Box [22948]
KOHLER, No. D-292865, Float/Equalize, 26 Volt, 10 Amp., 1 Phase, New In Box [22949]
KOHLER, No. D-292865, Float/Equalize, 26 Volt, 10 Amp., 1 Phase, New In Box [22950]
Battery Charger: KW LIFEGUARD,No. 12-680C,12 Cell,480 Volts,50/60 HZ, 3 Phase [20686]
Battery Charger: La Marche,24 Volts,12 Cells,208/240/480 Volts 50/60 HZ 3 Phase [20683]
Battery Charger: La Marche,24 Volts,12 Cell,208/240/480 Volts 50/60 HZ,3 Phase [20684]
LAMARCHE, No. A12B, New/Never Used [22782]
Battery Charger, Lamarche, 12 Volt [1449]
SENS, No. LC12-500-2, 12 Volt, 3.5 AMP, New, In-box [22812]
SENS, No. LC12-500-2, 12 Volt, 3.5 Amp, New, In-Box [22814]
SENS, No. LC12-500-2, 12 Volt, 3.5 Amp, New, In-Box [22817]
SENS, No. LC12-500-2, 12 Volt, 3.5 Amp, New, In-Box [22818]
SENS, No. LC24-500-2, 24 Volt Battery Charger [22811]
SENS, No. NRG22-20-RCLS, 12/24 Volt Output, 120/240 AC Input, 20 Amp, New In Box [22773]
SENS, No. NRG24-20-RCLS, "EnerGenius", 24 Volt, 20 Amp, 1 Phase, New In Box [22763]
Battery Charger: Deka, 24 Volts, 12 Cell [15884]

0B1804 BENDERS, PIPE, TUBE & BAR
1-1/2", PINES, No. 1, Horiz., [21365]
2", PEDRICK, No. A-5, Rotary, 2" Schedule 40 Pipe, 5 HP, Tooling [22515]
DiAcro, No. 3, Hand, 5/8" Round Capacity, Stand [21296]

0B1835 BENDERS, PIPE, TUBE & BAR, N/C & CNC
1", CROWN, No. PATRIOT RDB-10NM CNC, 3 Stack, PC Based Control, 2002 [22056]

0B2300 BEVELERS
No. X8-45, PULLMAX, 45 Degree V-Groove 5/16" Depth, 6 to 11 FPM Cutting Speed [21892]

0B2754 BLAST CLEANING/AIR & SUCTION
No. 4228-F, CYCLO BLAST, 42" x 29"Cabinet, Self Contained, Nice [19620]
No. BNP65, ZERO, 36"W x 35"D x 37"H Work Area, Reclaimer [20944]
No. F-2000, GUYSON,1-Man, Blast Cabinet,Work Light,45-5/8"x28" inside work size [19345]
PANGBORN, [21709]
TRINCO, [19517]

0B5004 BOOMS, LIFT, ARTICULATING, ELECTRIC
GENIE, No. Z-45/22, 51'Vert. Lift, 23' Horiz. Reach, LP Gas, 500 Lb. Capacity [21812]

0B5500 BORING MILLS, HORIZONTAL, TABLE TYPE
4", GIDDINGS & LEWIS, No. 340-T, 36" x 74" Tbl., 60" Cross, 50" Vert., 15 HP [23136]
4", VANGUARD, 63"-X, 47"Y, 55"-Z, 50 Tpr, 49" x 43" Rot. Tbl, Facing Head, New [20040]

0B6006 BORING MILLS, VERT. (Including Vert. Turret Lathes)
30", BULLARD, CUTMASTER, 3-Jaw, 225 RPM, Turret & Side Head, 30 HP, Clean [21735]
36", BULLARD, SPIRAL DRIVE, 4-Jaw, Turret & Side Head, Older, Runs Good [23137]
42", BULLARD, Spiral Drive, 4-70 RPM, Turret & Side Head, 3-Jaw Comb. Chuck [21471]

0B6952 BRAKES, APRON (Inches)
1/4" x 120", DREIS & KRUMP, No. PB-10250, Power, 1972 [20254]

0B6968 BRAKES, BOX & PAN (Finger)
12 Ga. x 4', NATIONAL, No. U4812, Floor Model, New [20878]
12 Ga. x 4', NATIONAL, No. U6-4812, Floor Model, 6" Max. Depth Of Box, New [20882]
12 Ga. x 4', TENNSMITH, No. HBU-48-12, [15690]
12 Ga. x 6', NATIONAL, No. U6-7212, Heavy Duty, 6" Max. Depth Of Box, New [20883]
12 Ga. x 6', NATIONAL, No. U6-7212, Heavy Duty, 6" Max. Depth Of Box, New [21304]
12 Ga. x 6', NATIONAL, No. U7212, Floor Model, New [20880]
12 Ga. x 6', NATIONAL, No. U7212, [22043]
14 Ga. x 8', NATIONAL, No. U6-9614, Heavy Duty, 6" Max. Depth Of Box, New [20884]
16 Ga. x 4', NATIONAL, No. U4816, 4" Max. Depth Of Box, New [20877]
16 Ga. x 4', NATIONAL, No. U4816, 4" Max. Depth Of Box, New [21995]
16 Ga. x 4', PROFORMER, No. U4-4816F, [19678]
16 Ga. x 4', TENNSMITH, No. HBU48-16, New [17985]
16 Ga. x 6', NATIONAL, No. U7216, Floor Model, New [20879]
16 Ga. x 6', PROFORMER, No. U4-7216, [19636]
16 Ga. x 8', NATIONAL, No. U9616, Floor Model, New [20881]
16 Ga. x 10', NATIONAL, No. U6-12016, Heavy Duty, 6" Max. Depth Of Box, New [20885]
NATIONAL, Stand For 48" Bench Model Brakes [21996]
NATIONAL, Stand For 48" Bench Model Brakes [21997]

0B6982 BRAKES, FINGER
12 Ga.x 8'PROFORMER, No. U4-9712, 2003 [18554]

0B6985 BRAKES, HAND
12 Ga. x 4', NATIONAL, No. N4812, Floor Model, New [20886]
12 Ga. x 6', NATIONAL, No. N7212, Floor Model, New [20887]
14 Ga. x 8', NATIONAL, No. N9614, Floor Model, New [20889]
14 Ga. x 8', NATIONAL, No. N9614, Floor Model, New [21039]
14 Ga. x 10', NATIONAL, No. N12014, Floor Model, New [20891]
14 Ga. x 10', NATIONAL, No. N12014, Floor Model, New [23256]
16 Ga. x 4', NATIONAL, No. S4816, Bench Model, New [20876]
16 Ga. x 4', TENNSMITH, No. HBS48-16, New [14712]
16 Ga. x 8', NATIONAL, No. N9616, Floor Model, New [20888]
16 Ga. x 8', NATIONAL, No. N9616, Floor Model, New [21257]
16 Ga. x 8', TENNSMITH, No. HB97-16, New [14737]
16 Ga. x 10', NATIONAL, No. N12016, Floor Model, New [20890]
16 Ga. x 10', NATIONAL, No. N12016, Floor Model, New [21324]
20 Ga. x 5', DREIS & KRUMP, No. 520, Floor Model [20722]
22 Ga. x 4', Tennsmith, No. H48-22, New [14044]

0B7015 BRAKES, PRESS, Hydraulic (Tons)
33 Ton, ADIRA, No. QH-3020, Hyd., Up-Acting, 80" OA, 61" BH, 4" Str., 1984 [22508]
100 Ton, STANDARD AB100-8, 2008, [21201]
110 Ton, PEXTO/LVD, No. 110-BH-10, 10' OA, 99" B.H., 6" Str., 1977, Clean [20435]
175 Ton, AMERICAN HERCULES, 14' O.A. [23233]

0B7020 BRAKES, PRESS, Mechanical (Tons)
15 Ton, WYSONG, No. 1548, 48" OA, 32" B.H., 2" Str., 4' x 16 Ga. [22885]
45 Ton Verson, No. 2078, 8' O.A., 78" B.H., 1942 [14551]
60 Ton, VERSON, No. 208, 11' O.A., 102" BH, V-Speed, 3" Str., 12" SH., 5 HP [20580]
90 Ton D. & K. No. 1012-L, 14' OA, 10'6" BH, Flange Bed, 4" Str., A.C., Clean [19966]
100/65 Ton, CINCINNATI, No. 404, 6' O.A., 4'6" BH, A.C., 4' x 1/4" Cap., Clean [22422]
90/135 Ton, CINCINNATI, No. 5, 8' OA, 6'6" B.H., 3" Str, 1970, Low Price [22730]
135 Ton, CINCINNATI 5-10,12' OA,10"-6" BH.,3" Str.Extra Die Height, 1951, [20150]
225 Ton, Chicago D. & K. Press Brake, 24" x 96" Flanged Bed and Ram, Air Clutch [15492]

0B9372 BURNERS
ECLIPSE, No. RM500, 2010, Never Used [22824]

0C1050 CENTERING MACHINES
WESTFALIA,Centrifuge,Model OSC-30-01036/25,Stainless Steel, New 2002 [21866]

0C1154 CENTRIFUGES
US CENTRIFUGE, No. G5-A, [22929]

0C1726 CHIP WRINGERS
No. 225, BARRETT, Clarifuge, 1 Gallon/40 Lbs. Capacity, 2 HP, 1996 [20131]

0C1950 CHUCKS
6-1/4" Rohm, 3- Jaw Power Chuck [17219]
6" Rohm, 3-Jaw Power,Duro-NC160,1 1/4" thru hole,A1-5 back [17203]
10" Cushman, 2- Jaw Power Chuck, No Hole [17218]
10" Cushman, 2-Jaw Power Chuck, No Hole [17221]
10" Logansport, 3-Jaw Power Chuck,A1-6 Back [17241]
10" Powerhold-Gamet, 3-Jaw Power Chuck [17220]
10" SP, Mdl.CC, 3-Jaw Power Chuck,3" thru hole,A1-8 back,Like New [15821]
10" SP Mdl.10CC, 3-Jaw Power Chuck,A1-8 back.3" thru hole,A1-8 back [15820]
10" SP, 3- Jaw Power,2 3/4" thru hole,Flat Back [17225]
10" SP 3-Jaw Power Chuck [17234]
10" SP Sheffer, 3-Jaw Power,3" thru hole,A1-8 back [17222]
10" SP Sheffer, 3-Jaw Power Chuck [17240]
12", Autoblok,3 jaw power,4 3/4" hole,Flat Back [15826]
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-A08C,A-8 Back [17229]
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-Ao8C,A-8 back [17232]
12" Cushman, 3-Jaw Power Chuck,Md.10-590-12-A08C,A-8 back [17233]
12" Cushman, 3- Jaw Power,2 1/2" thru hole,A1-8 back [17226]
12" Cushman, 3-Jaw Power,21/2" thru hole,A1-8 back [17227]
12" Cushman, 3-Jaw Power Chuck,Md.1059012-A08C-U-01051,A-8 back [17228]
12" Cushman, 3-Jaw Power Chuck,Md.12-590-12-AO8A,A-8 back [17235]
12" Cushman, 3-Jaw Power Chuck, No Hole [17213]
12" Cushman, 3-Jaw,2 7/8" thru hole,serrated jaws,A1-8 back Flame treated [17211]
12" Gamet, 3-Jaw,Md. 350MX-3-A8,3 3/4" thru hole,serrated jaws [17215]
12" Howa, 3-Jaw, Hyd., [15318]
12" Howa, 3-Jaw, Hyd., [15319]
12" Logan, 3-Jaw Power Chuck,Md.362-12-6,center,A1-6 back,tongue-groove jaws [17210]
12",MMK,3-Jaw Power Chuck W/Cylinder,3.5" Thru Hole,Set of Hard Jaws [16365]
12" SP Sheffer, 3-Jaw Power Chuck,Acme Jaws [17239]
14" Gamet, 3-Jaw Power Chuck,3 5/8" thru hole,A1-8 back [17204]
15" Cushman, 4-Jaw,Steel chuck,L-1 back,3 3/16" Hole.1 piece jaws [17208]
15" Cushman, 4-Jaw,Steel Chuck,L-1 back,3 3/16" hole,1 piece jaws [17209]
15" Cushman, 3-Jaw Power Chuck [17214]
15" Cushman, 3 Jaw Power,3" thru hole, [15824]
18" Logan, 3-Jaw, Power Chuck [16562]
21" Gisholt, 3-Jaw, 6-1/4" Thru Hole, A-15 Back [16565]
42", SCHIESS, 4-Jaw,chuck [12354]
47", MORANDO, 3-Jaw,Power chuck [19466]
48" O.S.Walker No.48R, Permenant Magnetic Chuck [16686]
96", 5-Jaw, Chuck [12715]
14 1/4" x 60" Electro Magnetic Chuck [17048]
Gamet, Chuck Cylinder,Model 43VX,Ser.No.15698 [17197]
10" x 48", Hanchett-Magna-Lock , 110V D.C., 4" High [13310]
10" x 72", Hanchett-Magna-Lock, 110V D.C., 4" High [13309]
10" x 18" Hanchett Magna Lock Electro Magnetic Chuck, Fine Pole,110 Volts DC [12909]
Logansport, Chuck Cylinder, Part No. 801C-8 [16115]
Logansport, Chuck Cylinder [17195]
Logansport, Chuck Cylinder [17196]
Logansport, Chuck Cylinder,Part No. 852-3.12 [16114]
LOGANSPORT, No. S-60516N02.5 Chuck Cylinder [19240]
LOGANSPORT, No. S-60962,Chuck Cylinder [19239]
LOGANSPORT, No. S-61014 Chuck Cylinder [19241]
LOGANSPORT, No. S-61014 Chuck Cylinder [19242]
MMK, Chuck Cylinder,Md No. Type ZKP195193-20 [16112]
SMW, Chuck Cylinder,Md.No.ZHD-S [16117]
SMW, Chuck Cylinder,Type.ZHD-S [16118]
SMW, Chuck Cylinder,Md.No.ZHD-S [16119]
Electro Magnetic Chuck, 11-13/16" x 47-1/4" [12335]
LOGANSPORT, Chuck Cylinder, No. 852B-2.5 [19142]
Magnetic Angle Block W/Magnetic Chuck, 18-3/8" x 37-1/8" [1660]
SPEED CHUCK, JACOBS Rubber Flex [15121]

0C1955 CHUCKS, MANUAL
28", 4 Jaw, CUSHMAN [22135]

0C2230 CIRCUIT BREAKERS, MOLDED CASE
300 Amp, SQUARE D, LA300A, [22825]
300 Amp, SQUARE D, LA300A, [22826]
300 Amp, SQUARE D, LA300A, [22828]
300 Amp, SQUARE D, LA300A, [22831]
400 Amp, SQUARE D, LA300A, [22827]
400 Amp, SQUARE D, LA300A, [22830]
400 Amp, SQUARE D, LA400A, [22832]
800 Amp, CUTLER HAMMER, ND50K, 600 V., Digitrip Optim 550 Programmable Trip Unit [22767]
1600 Amp, GE, SSF16D216, 600 V., Never Used, In Cabinet [22799]
2500 Amp, SQUARE D, RL2500, [22765]
2500 Amp, SQUARE D, RL2500, PowerPact, Micrologic 3.0, Unused [22766]
2500 Amp, SQUARE D, No. RL2500, [22803]
3200 Amp, SQUARE D, NW 32H1, Never Used, Cabinet [22798]

0C3806 COMPARATORS
12", MITUTOYO, No. PJ-311, 10X Lens, Surface Illumination, DRO, 1 Phase, 1992 [22496]
14" Ex-Cell-O Mdl.14-5, 8" x 26" Tbl., Surface Reflection, Lens Turret [16542]
14", JONES & LAMPSON, No. TC-14, Pwr. Turret/6 Lenses, Surface Reflection, DRO [17035]
14", JONES & LAMSON, No. TC-14, Pwr. Lense Turret/4 Lenses, Surface Reflection [17036]
14", KODAK, No. 14-2A, Surface Illumination, 10X & 31.25X Lenses, 1 Phase [16057]
14", MITUTOYO, No. PH-350, Horiz., Bench, 10X, 20X, 50X, Sold As-Is [21966]
12", NIKON, No. 6C, Vert. Beam, Lens Turret, Chart Ring, Surface Reflection [16924]
21", GAGEMASTER, SERIES 80, 8" x 24" Tbl., Quadra-Chek DRO, 1985 [22595]
30", Ex-Cell-O, No. 30-827, 10X, 20X, 50X, Surf. Illumination [16347]

0C5326 CONVEYORS, BELT
16" W. x 12' L., HYTROL,12" Wide Power Belt,Adj. Legs [23229]
Power Belt Conveyor,7-3/4" Wide,81" Tall,DC Drive Motor,Vir. Hopper [23160]

0C5761 COOLANT FILTRATION SYSTEMS,HI-PRESSURE
D.E. SMITH, No. LV638, Koolant Koolers Chiller, 80-100 GPM, 2002, Nice [23236]
HYDROFLOW, No. FA-60, 2002,Paper Filter,Clean Tank,10HP,3-1HP Pump Motors [21756]
Koolant Kooler No. OX-6000, Water Cooler, Heat Exchanger Type, 60,000 BTU [19539]
Koolant Kooler, No. OX-6000, Water Cooler, Heat Exchanger Type, 60,000 BTU [19540]

0C6306 CRANES, BRIDGE & OVERHEAD
1/2 Ton, GORBEL, Free Standing, Span 9', 10'L, 9' Under Hook, Nice [22385]
5 Ton, ACECO,34-1/2' Span,Under Hung,6-Way Power,Munck Hoist,Dlb. Under Hung [22890]

0C6575 CRANES, JIB
1 Ton, RELIABLE, Floor Mount, 360 Degree, 1 Ton Yale Elect Hoist [22875]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degree, 1 Ton Yale Elect. Hoist [22869]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degree, 2 Ton Yale Hoist, 10'H x 14'L [22870]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degree, 2 Ton Yale Elect. Hoist [22871]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degree, 2 Ton Yale Elect. Hoist [22872]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degree, 1 Ton Yale Elect. Hoist [22873]
2 Ton, ABELL-HOWE, Floor Mount, 360 Degrees, 2 Ton Elect Hoist [22874]
2 Ton,Abell-Howe,360 Degree Jib Crane with 2 Ton Hoist [23152]
2 Ton, [23153]

0C7189 CRIMPERS
HASE, [23163]

0C7904 CUT-OFF LINES
PEDRAZZOLI, SCL 102-3000, Program Cutting Line, 12" Blade, Unloader, 1995 [19963]

0C8030 CUT-OFFS, PIPE, TUBE & BAR
4-5/8", MODERN, No. 4B, Manual, 4" Pipe, Front Slide, 3 HP, Older But Clean [21366]
5" OMP, Euromatic 370CS, Cutting Line, 118" Max., Miter, Bundle Loading, 1993 [19902]
7", MODERN, No. 6NC, CNC,Fanuc 18TA,8 Station Turret,48" Cut-Off,New 1997 [20733]

0D0654 DEBURRING MACHINES
No. 111, FALLS, Bottom Edge One Pass, 24 Ga. to 1/4" Thick, 1/2" to 4' or more W [16068]
FALLS, No. 111,Deburr,24 Ga. to 1/4" Thickness, 1/3 HP, 1725 RPM, 115 V 60/1 Pha [21169]
No. TBE60, TUBEMART, D.E., 6 HP [21110]

0D1454 DEMAGNETIZERS
KANETSU, No. KMDT-40, 11 KVA, 15-5/8" x 12-1/2"H Opening [22665]
No. SB-911, MAGNAFLUX, 9" x 11" Coil Opening, 8800 Amp, 30/30 Duty Cycle [20520]
ELECTRO-MATIC, [20390]

0D2875 DISINTEGRATORS, METAL
ELECTRO-ARC, No. 2DBQT, 10 KVA, 26" x 18-1/4" Tbl., Auto-Feed, Coolant, Clean [22446]
UNI-TEK, No. 200SG, 30" x 30" Tbl., Servo-Feed, Coolant, 1 Phase, Clean [22688]

0D3700 DRILL HEADS (Including Drills, Multi-Head)
4-Head Hause Holomatic Machine [23130]

0D4554 DRILLS, GUN
DEHOFF, [23047]

0D4803 DRILLS,H.D.& SENS,MULT.VERT.SPDL(Incl.Gang &Cluster)
2 Spdl., LeLand-Gifford, 26", No. 2LMS, 150-1800 RPM,2 MT,3 HP, 1979 [19949]
15", 2 SPDL. Powermatic No. 1150, 30" x 20" Tbl., Parts Machine, Sold As-Is [19375]

0D4810 DRILLS, HEAVY DUTY & SENSITIVE, SGL. VERT. SPDL.
SNOW DR-2,3/8" drill cap.,5-C Collet chuck,10"x25" Tbl.Coolant Pump, [21393]
15" ROCKWELL,Md. 15-665,10"x10 1/2" Tbl.,7 1/2"C-Line,6-Step-Pulley,3/4Hp.115 V. [21563]
20" Rockwell,Md.70-330,Var-Speed,125-1250 RPM.,3 MT.,18"x16" Tilting Table [22550]
13" CRAFTSMAN, Single Spindle, 1/3 HP, 115 V 60/1 Phase, 1725 RPM, On/Off Switch [21671]
14" ROCKWELL, Single Spindle, 1/3 HP, 115 Volt 60/1, 1726 RPM [21670]
15", CLAUSING, No. 1755, Bench, 2 MT, 410-5380 RPM, 10" x 14" Tbl.,1 HP [20028]
15", ROCKWELL, Hand, Bench Model,V-Speed 450-4700 RPM, ,14" x 11" Tbl., 3/4 HP [21223]
15" BOICE CRANE, 1/2 HP, 208-220-440 V 60/3 Phase, 1725 RPM [21673]
17" DELTA, Single Spindle, 1-1/2 HP, 220-440 V 60/3 Phase, 1750 RPM [21676]
17" ROCKWELL, Single Spindle, 1/2 HP, 230-460 V 60/3 Phase, 1725 RPM [21675]
18", ARBOGA, Gear Head, 3 MT, 125-3480 RPM, Hand Feed, 15" x 20" Tbl., 1 HP [12956]
24", CINTI-BICKFORD, Box Column, 4 MT, PF, 60-1000 RPM, 22" x 19" Tbl, 5 HP [20240]
20", CLAUSING,Md. 2277,3 Mt. Spindle,Var. Speed,150-2000 RPM. 1-1/2-3/4 HP. [22879]
20" DELTA ROCKWELL,1- 1/2 HP, 220-460 60/3 Phase, 1140 RPM, No. 3 MT. Spld. [21674]
20", DELTA ROCKWELL [20647]
24" CINTI-BICKFORD, Box Column, 4 M.T., 60-1000 RPM, 24" x 19" Tbl., 5 HP, 1957 [17689]
24", G & L BICKFORD, Box Column, 60-1000 RPM, P.F., 4 MT, 24" x 19" Tbl., Nice [22481]
25", FOSDICK, 30-750 RPM, 4 MT, 23" Dia. Tbl., 7-1/2 HP [21874]
25", SOLBERGA No. SE2030, Gear Hd, Floor Model, Hand Fd, 3 MT, 90-3610 RPM, 1998 [21937]
25", WILTON, No. 24204, Gear Head, 82-1460 RPM, 3 MT, 25" x 18" Tbl, 1-1/2 HP [20784]
28" G. & L. Bickford, 4 MT, 60-1000 RPM, 7-1/2 HP, 24" x 21" Tbl., 1973 [14979]
29", SOUTH BEND/IBARMIA, No. B-32, P.F., Tapping, 3 MT, 31" x 51" Tbl, Excellent [20319]
30", CLEEREMAN, Gear Hd., 75-1500 RPM, P.F., 28" Dia Tbl, 4 M.T., Low Price [22551]
AVEY Single Spindle Drill Press, Model Number 2 [21789]
CLAUSING 1771, [23128]
POWERMATIC,Md. 1200,Var-Speed,130 to 1300 R.P.M.,1.5 Hp. 60/3 [23108]

0D5445 DRILLS, MULTIPLE SPINDLE, N/C & CNC
21 SPDL, MOLINE, No. HD68, In-Line, 75 HP, 84" x 84" Tbl., A-B 8400 CNC 1991 [15913]

0D5700 DRILLS, RADIAL
2'6" x 6", JOHANSSON, 105-1200 RPM, 4 MT, Tapping, 20" x 40" Tbl., Coolant, 3 HP [21835]
3' x 8", WILLIS-BERGO, No. FS 870, 65-1200 RPM, 4 M.T., Pwr Elev, Box Tbl, 3 HP [22851]
3' x 9", CINCINNATI BICKFORD, 150-3000 RPM, 4 MT, Tapping, Pwr Elev, Low Price [21584]
4' x 9", AMERICAN "Hole Wizard, 50-1500 RPM, 5 HP, Box Table, Older But Clean [22892]
4' x 9", CINTI-BICKFORD, 75-1500 RPM, 4 M.T., Pwr Elev., Box Table [22581]
4' x 9", CINTI-BICKFORD, 100-2000 RPM, 4 MT, Pwr Elevation, Low Price [23055]
4' x 11", CARLTON, No. 1A, 60-1500 RPM, 4 MT, Pwr Elev, 5 HP, Older, Low Price [21582]
5' x 17", CARLTON, No. 3A, 15-1500 RPM, 5 M.T., Pwr Clamp & Elev, L-Base, 25 HP [23042]
6' x 15", CINCINNATI-BICKFORD, Chipmaster, 14-1750 RPM, 5 MT, Box Tables [22363]
7' x 19", CINTI-BICKFORD, 23-1415 RPM, 6 MT, Double Base, Pwr Elev., 10 HP [17148]
8' x 21", YMZ, [22655]
8' x 22", VANGUARD, 6 M.T., 16-1250 RPM, Pwr Clamp/Elev, 9 KW, Box Tbl, Coolant [20036]
INDEX, Ram Type, No. IRD125, V-Speed, P.F., 20" x 50" Tbl., 3 MT, 1-1/2 HP [23089]

0D8300 DUST COLLECTORS
TORIT, No. 13FB,Cyclone Type,Dust drawer,Filter Bag,1hp, 60/3 [19808]
1000 CFM, TORIT, No. MC1000, Mist Collector, 2 Stage, 3 HP [21386]
1200 CFM, HAMMOND, No. DK-6-B,Silencer Att.,Bottom clean out,2Hp. 60/3 [21398]
1250 CFM, DUST-HOG, No. F150-3-D, Cabinet Type, Cloth Filter, 3 HP, 1994, Clean [21682]
1425 CFM, TORIT, No. 90, Cabinet Type, Clothe Filter, Exhaust Silencer, 5 HP [21434]
Smog Hog,Md SG-2H, Welding Smoke,3Hp. 60/3 [21639]
3300 CFM, MICRO AIR, No. RPO4, Cartridge Type, HEPA Filter, 5 HP, 2008, Nice [23041]
AERCOLOGY, No. SF-1500H,Year 1986,Unit Very Nice,Less Filters [21689]
ROTOCLONE, No. 8,Skimmer, 2-Hopper Bottom, 3Hp. 230-460-60/3, Mag. Starter [21666]
Standard No.102, 3/4 HP. 110 Volt 60/1 [13651]
TORIT, No. 13-FB, [21399]
84 Torit,3 Hp, 220/440 V 60/3 Phase [19502]
TORIT,Model 84,Cabinet Model,Missing Bottom Door,Sold as is. [21131]

0E2425 ELECTRIC DISCHARGE MACHINES, N/C & CNC (CONVENTIONAL)
ELOX, No. 18-6636, 36" Long., 16" Cross, 72" x 40" x 20" Tank, FANUC 6MB, [20730]

0E6500 ENGRAVING MACHINES/PANTOGRAPHS
GORTON,Md.P3-2,2 Dimensional,Tooling,Out of Navy Defense Plant [21705]

0F0854 FEEDING & STRAIGHTENING MACHINES
12" W. x 18"Str x .171", AIR FEEDS, No. AF3, 5 Roll Straightener [19018]

0F1500 FILTER PRESSES
47", PERRIN, 1320 Sq.Ft., 65 CuFt., 60 Polypropylene Plates [22859]
47", PERRIN, 1320 Sq.Ft., 65 Cu.Ft>, 60 Polypropylene Plates [22860]
Durco Quadra, Filter Press, 8 Cu. Ft. [17267]

0F1925 FLAME CUTTING EQUIPMENT, N/C & CNC
5' x 10', CUTTER II, ADVANCE CUTTING SYSTEM, KOIKE Control, Hypertherm, 2005 [23143]

0F2798 FOLDING MACHINES
RAS, No. 74.25, 8 Ga. x 100", System 9000 CNC, Tooling [22703]

0F5006 FURNACES
LUCIFER, No. QD4KHE24, 12"H x 14"W x 22"L Chamber, 1200 Deg F, 5 KW, 1 Phase [22594]

0G3754 GRANULATORS
6 3/4" x 14 3/4", RESCOR, No. 3100,5hp,Bottom discharge [20936]
HORAI, No. V-480, 20 HP, 1987 [22708]

0G3975 GRINDERS, BELT
1-1/2", BURR KING, No. 760, Vari-Speed 800-8000 FPM, 1-1/2 HP, 1 Phase [21580]
4" Buehler Surfmet II, 4" x 9" Grinding Area, Coolant, 1 Phase [13531]
6", KALAMAZOO,Combination Belt,Disc Sander, 60/3 or 60/1 [22282]
6", KALAMAZOO, No. S6MS-3, 48"L Belt, 6" x 10" Tbl., 3500 SFPM, 3 HP, Stand, New [22865]
6", TOOLKRAFT,Md No. 4340,9" Dis,Steel Fab. Stand,1/2 Hp. 115-230 60/1 [20673]
10", HAMMOND 1000-D-B, [21362]
36", GRINDINGMASTER,2 Heads,Dry [19085]
TIMESAVER, Model CS360,Multi-Directional Abrasive Disc Machine,Year 2000 [22119]

0G4175 GRINDERS, CARBIDE
HAMMOND, No. CB-77BW,Chip Breaker Tool Grinder [21410]

0G4306 GRINDERS, CENTERLESS
No. 220-8, CINCINNATI, 20" Wheel, Auto.Infeed, Auto. Balancing, Clean [22046]
GLEBAR, No. DD-7, Max. Diameter 1/2", 2" Length, Double Disk, New 2001 [21604]
No. TG-12X3, ROYAL MASTER, 1.5" Cap., Hyd. Dressers, 7-1/2 HP, 1988, Excellent [23214]
No. TG-12X3, ROYAL MASTER, 1.5" Cap., Hyd. Dressers, 7-1/2 HP, 1997, Excellent [23215]
No. TG-12X3, ROYAL MASTER, 1.5" Cap., Hyd. Dressers, 7-1/2 HP, 1998, Excellent [23216]
No. TG-12X3, ROYALMASTER, 1.5" Cap., Hyd. Dressers, 7-1/2 HP, 1993, Very Nice [23213]

0G4706 GRINDERS, CYLINDRICAL
5" x 12" Myford, No. MG-12, Hand Feed, 3 HP, 1970 [16652]

0G4800 GRINDERS, CYLINDRICAL
11" x 24", CHEVALIER, No. GU-1124A, Hyd, Drop Down ID, Plunge, Auto Infeed, 1997 [22552]

0G5054 GRINDERS, DRILL
No.3B, BLACK DIAMOND, 1/8" to 3/4", Collets, 1/3 HP, 1 Phase [21734]
No. 600 OLIVER, 1/2" to 3" Capacity, 2 HP [22351]

0G6705 GRINDERS, JIG
11" x 24", MOORE, No. G18, 480 V 60/3, 1978, [21006]

0G6775 GRINDERS, KNIFE
6" x 120", REFORM, No. AR31 Type 5, 10" Wheel, Elect. Chucks, 10 HP, 1985, Clean [21250]

0G7044 GRINDERS, PEDESTAL TYPE
Cadet, No. 100, 1/2 HP, 220 V 60/3 Phase, 3450 RPM [21690]
DELTA/ROCKWELL, No. 23-501, Double End, 1/2 HP, 1 Phase [20635]
DOUBLE END GRINDER [21691]
GRINDER, DOUBLE END [21693]

0G8025 GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
6" x 12", CHEVALIER, No. FSG-612, Hand, Perm. Chuck, 1 HP, As Taken From Service [23151]
6" x 18", BROWN & SHARPE 618 MICROMASTER, Hand, Perm. Chuck [22585]
6" x 18", CHEVALIER, FSG-618M, Hand, Perm. Chuck, 2 HP Spindle [22503]
6" x 18", HARIG, No. 618, 1-1/2 HP, Walker Perm. Chuck, Nice [22498]
6" x 18", PARKER-MAJESTIC, No. 2, Hand Feed, 1 HP, 1968, Price Reduced [15625]
6" x 18", PARKER-MAJESTIC, No. 2, Hand, 1 HP, Chuck, 1977, Low Price [16381]
6" x 18", PARKER-MAJESTIC, No. 2, Elect. Chuck, 1 HP, 2-Axis DRO, Reduced Price [16471]
6" x 18", WELL SETTING, Hand, 1 HP, 3440 RPM, 220/440V 60/3 Phase [19647]
8" x 18", COVEL [22787]
8" x 18", KENT, No. KGS-818AHD, 3-Axis, Hyd, Elect. Chuck, 1988 [23204]
8" x 24", BROWN & SHARPE, No. 824 Dial-A-Size, 2-Axis Hyd., 1983 [22579]
10" x 20", VANGUARD, No. GMY250, Hyd. Longitudinal, Elect. Chuck, Coolant, New [21665]
11" x 23 5/8", NICCO NSG-6, [20808]
12" x 24", CHEVALIER, No. FSG-1224ADII, Incr Downfeed, Dresser, Coolant, 1996 [22649]
12" x 24", SUPERTEC, No. STP-1428AD, 3-Axis, 12" Wheel, Elect. Chuck, 3 HP, 1990 [23203]
12" x 36", BROWN & SHARPE No. 1236, Elect. Chuck, Coolant, 1980 [22584]
12" x 36" Gallmeyer & Livingston, No. 550, Hyd., Elect. Chuck, Coolant, 1979 [16215]
14" x 48", GALLMEYER & LIVINGSTON, No. 660, IDF, Elect. Chuck, Coolant, 1968 [14269]
16" x 28", CHEVALIER, No. FSG-1628AD, 3-Axis, Elect. Chuck, Coolant, 1991 [23098]
16" x 32", ACER, No. AGS-1632AHD, 3-Axis, Elect Chuck, Coolant, Sony DRO, 1999 [22693]
16" x 40", KENT, No. KGS-410AHD, 3-Axis, Elect. Chuck, Coolant, 1990, Clean [22731]
18" x 40", CHEVALIER, No. FSG-1840AD, IDF, Clean [23045]
20" x 60", KIKINDA, No. PRB-500/1500, 3-Axis Hyd., Elect. Chuck, Coolant [21499]
12" x 24", OKAMOTO, No. ACCUGAR 124N, Hyd., I.D.F., Coolant, 5 HP, 1982, Clean [20553]

0G8080 GRINDERS, SURFACE, ROTARY TYPE (HORIZ. SPDL.)
16", CINCINNATI-MILACRON, No. 261, 16" Chuck, Auto-Feed, Hyd. Tbl., 15 HP, 1981 [23224]
16", Heald, No. 261, Auto-Feed, Hyd. Tbl., 15 HP, Coolant, Clean [15422]
16", HEALD, No. 261, Auto-Feed, Hyd. Tbl., [22622]
30", HEALD, No. 25A, Tilt Table, 10 HP Spindle, Coolant, Clean [23237]

0G8100 GRINDERS, SURFACE, ROTARY TYPE (VERT. SPDL.)
30", BLANCHARD, No. 18-30, Wet-Base,25Hp, Year 1956,Under Power [22517]
42", MATTISON, No. 42, 48" Swing, 75 HP, 22" Seg. Wheel, 24" Vert., Ext. Coolant [20427]
42", MATTISON, No. 24-42, 22" Wheel, 75 HP, External Coolant, Nice, Low Price [21947]

0G8206 GRINDERS, TAP
No. 1100, HYBCO, [23101]

0G8500 GRINDERS, TOOL & CUTTER
No. 57-900-000, CUTTERMASTER, Air Bearing Fixture, 5C, 5" Cup Wheel, 1 Phase [22707]

0G8525 GRINDERS, TOOL POST, DOUBLE END
10"Dayton Double End Grinder,Stand,Water Pot,Tool Rest,Worklight,1 Hp.115 60/1 [22548]

0H5000 HOISTS
[15538]

0H5204 HOISTS, ELECTRIC
500 Lb. Yale, Roller Chain, Pull Rope, 440 Volt [1062]
500 Lb, COFFING, No Voltage Info. [16543]
1/2 Ton Dresser Load Lifter, Cable, 220/440 3 Phase, Trolley [15931]
1/2 Ton Dresser, Load Lifter, Cable, 220/440 3 Phase, Trolley [15932]
2000 Lb., ACCO/WRIGHT-WAY, Pwr Trolley, 16/5 Lift FPM, 4-Way Pendant, Nice [22160]
2000 Lb., BUDGIT, For Parts Only, No Voltage Info. [19253]
1 Ton Dresser, Shaw Box, Cable, Trolley [15938]
1 Ton Dresser Shaw Box, Cable, Elect. Trolley [15935]
1 Ton Dresser Shaw Box, Cable, Trolley [15939]
1 Ton P. & H. Zip Lift, Cable, Trolley, 440 Volt. [15937]
4000 Lb. C/M Lodestar, Model R, 8 FPM, Pendant Control, Hook Mount, 1 HP [19439]
4000 Lb., R & M LOADMATE, No. LM16, Pwr Trolley, Pendant, 2002, Nice [22578]
4000 Lb., YALE, 9/18 FPM, 18' Lift, Motorized Trolley, Pendant, Excellent [21318]
4400 Lb., JET, No. 2DS-3-10, 10' Lift, 2-Speed, Chain Bucket, Trolley, Nice [23046]
5 Ton P & H Sigma Electric Hoist [12327]

0H5751 HOISTS, TROLLEY
1/2 Ton, PEERLESS, No. E52E-122, Built in Trolley, 220-440, 3 Phase [20697]
1 Ton Aro, Trolley [15908]
1 Ton Ingersoll-Rand No. PT-010, [15909]
3 Ton, BUDGIT, No. 905482,,Trolley,I Beam Mount,Fits a 9" to 11" Beam [20101]
3 Ton, BUDGIT, No. 905482,Trolley,I Beam Mount,Fits a 9" to 11" Beam [20102]
3 Ton, BUDGIT, No. 905482,Trolley,I Beam Mount,Fits 9" to 11" Beam [20103]

0H5975 HONES, HORIZONTAL
No. BHXL, SUPERIOR,Hone [20547]
No. MBB-1800, SUNNEN, Power Stroker, .125"-3.75" Cap., 80-310 SPM, Clean [22371]
No. SH2, SUPERIOR, 3.5" Dia. Capacity, Lots Of Tooling, 1992 [21594]
SUNNEN, [22565]

0H8204 HYDRAULIC POWER UNITS
3 HP, VICKERS,Hydraulic unit. [23252]
MTS, Model 502.13, System 906.28 [22643]

0I4806 INSPECTION EQPT.(Incl.e-beam & optical mics)See also Testers
BENCH CENTERS, SUNDSTRAND, 12" x 36", 1500 Lb. Capacity [23247]

0K1951 KETTLES
Steam Kettle: Groen Mdl.D-10, Tilting, 25 PSI Jacket [14647]

0K3004 KEYSEATERS
1-1/4" W. x 9" L., MORRISON, No. 1-1/4, New [18072]
1-1/4" W. x 9" L., MORRISON, No. 1-1/4, 1/16" to 1-1/4" Cap., V-Speed, 2 HP, New [21781]
No. 2HFR, MITTS & MERRILL, Hyd., 1-1/4"W x 12"L Capacity, Flush Floor [21352]
1-1/4" Wide x 12" Long, MITTS-MERRILL, No. 2 [22717]

0L2125 LATHES, CHUCKING, N/C & CNC
FUJI, ANS-40T, 23" Swg, 2.6" Bore, 30 HP, 12 Pos Trrt, FANUC 18-T, Robot, 2000 [19748]

0L2150 LATHES, COMBINATION, N/C & CNC
LEBLOND, No. BARON 50, [18346]

0L2155 LATHES, COMBINATION, N/C & CNC, 3-AXIS OR MORE
HWACHEON ECO 21HS, FANUC 18T, 8"Chk, Sub Spdl, Chip Conv., 1999 [21973]

0L3000 LATHES, ENGINE
9" x 36" cc, HARDINGE,1 HP, 230-3500 RPM, 440V 60/3 Phase, 1967 [21209]
12" x 28" cc, LANCER, [21967]
12-1/2" x 30" cc, MONARCH, 10EE, 5 HP VFD 0-4000 RPM, Taper, S.R., DRO, Clean [22891]
13" x 28" cc, SOUTHBEND, [22695]
14-1/2 Model,Southbend Toolroom,36-1/2" Centers,8" 3 Jaw Chuck [22738]
14" x 40" cc, WILLIS, 2008, [21297]
15" x 40" Hales,Gap Bed,in-mm,37 to 1800 RPM.Brake [23125]
15" x 50" cc, CLAUSING COLCHESTER, Inch/mm, 2000 RPM, 7-1/2 HP, 1987, Clean [22651]
15" x 54" cc, LEBLOND MAKINO, Servo-Shift, 45-1800 RPM, Inch/mm, DRO, 1991 [22466]
15" x 78" cc, LEBLOND Regal, Servo-Shift 60-2400 RPM, 5 HP, Clean [21730]
17" x 54" cc, MONARCH, Series 61, 19-800 RPM, Taper, S.R., 7-1/2 HP, Clean [22387]
17" x 102" cc, MONARCH, Series 61, 21-900 RPM, Taper, (2) S.R., Clean [22338]
CINCINNATI,18" X 48",37 to 1470 RPM.,Cam-Lock Spld. [23103]
18-1/2" x 54" cc, MONARCH, Toolmakers, Taper, 19-800 RPM, 3 & 4 Jaw, 10 HP, Nice [22443]
18" x 65" cc, TOOLMEX, [23196]
18"/26" x 80" ICOCA, Gap Bed, 20-2000 RPM, Inch/mm, Taper, Coolant, Clean [19640]
18" x 90" cc, CINCINNATI "Tray Top", 20-820 RPM, Taper, Well Tooled, Clean [21787]
20" x 54", LEBLOND, 16" Heavy Duty, 16-2000 RPM, 20 HP, Low Price [23090]
20"/28" x 60" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New [20016]
20"/28" x 80" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New [20506]
20"/28" x 80" cc, VANGUARD, Gap, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks [20086]
20"/28" x 80" cc, VANGUARD, 10-1400 RPM, Inch/mm, Taper, DRO, S.R., Chucks, New [20087]
20" x 80" cc, VICTOR, No. 2080G, Gap Bed, Inch/mm, 10 HP, S.R., 3 & 4 Jaw [22689]
20"/27" x 100" cc, VICTOR, No. 20100G, Gap Bed, Inch/mm, [22705]
24" x 56" cc, SAN YUEN, No. SAG-2500H, Gap, Inch/mm [22711]
24"/32" x 80" cc, MORANDO, Gap Bed, Inch/mm, 2000 RPM, 3.5" Hole, SR, 1990 [21592]
24"/31" x 120" cc, VANGUARD, Gap, 7.5-800 RPM, Inch/mm, Taper, DRO, Chucks, New [20023]
24"/31" x 120" cc, VANGUARD, Gap, 7.5-800 RPM, Inch/mm, Taper, DRO, Chucks, New [21863]
25" x 120" cc, WAFUM/POLAMCO, No. TUR63A, 5" Hole, Inch/mm, Taper, Well Tooled, [22878]
26" x 144" cc, LEBLOND Regal [22715]
27"/33" x 120" cc, AMERICAN EDELSTAAL, Gap Bed, Inch/mm, 4" Hole, Taper, 1979 [23184]
32"/39" x 60" cc, VANGUARD, Gap, 5-720 RPM, Inch/mm, DRO, Taper, Tooled, New [20108]
32"/39" x 120" cc, VANGUARD, Gap, 5-720 RPM, Inch/mm, Taper, DRO, Tooled, New [20107]
45" x 312" cc, LEBLOND, Model NK, 4-255 RPM, Hard Ways, PRT, 20 HP, Nice [22670]
46" x 96" cc, AMERICAN Pacemaker, 30" Over C/S, Hardways, 750 RPM, 50 HP [22516]

0L3040 LATHES, ENGINE (SHAFT), N/C & CNC
20" x 72", VANGUARD, No. CAK50, 40-1800 RPM, 10 HP, Fanuc Oi, New [20908]
32" x 120", POWERTURN, Flatbed, 9-1000 RPM, 4" Hole, Delta Dynapath, Clean [22927]

0L4106 LATHES, OIL FIELD & HOLLOW SPINDLE
35" x 118", VANGUARD, No. S1-262A, 14" Hole, Front & Rear Chucks, 25 HP, New [20652]

0L4304 LATHES, PRECISION, JEWELERS, TOOLROOM, Etc.
No. TFB-H, HARDINGE, 11" x 18", Collet Closer, 125-3000 RPM, Coolant, 1979 [22756]

0L4805 LATHES, SECOND OPERATION
Clausing No. 5509,Hi-Speed Hand Turret Lathe,Douple Tool Cross Slide,Sold As-IS [21395]

0L6954 LEVELERS (ROLLER / PLATE & STRETCH)
66" x 1-3/4", BLAW KNOX/AETNA, 21 Roll, Triple Backed Up, 25 HP, 1967 [21774]

0L7225 LIFTERS
2000 Lb., LEXCO, [20194]
2000 Lb. Lift Table [15239]
2500 Lb., AUTOQUIP, Hyd., 44" x 44" Platform, Tilting, 1 Phase [22106]

0M0185 MACHINING CENTERS, VERT., N/C & CNC
15"X, 15"Y, 10"Z, BOSTOMATIC, No. BD12G, 16" x 13" Tbl, 30K RPM, ATC, 2001, Nice [22856]
39.4"X, 20"Y, 18"Z, MAZAK AJV 25/404N, 6000 RPM, Pallet Changer, M-32, 1994 [21458]
40"X, 20"Y, HURCO, No. BMC 4020HT, 6K RPM, 20 HP, Ultimax III Dual Screen, 1996 [22694]
Cintimatic Vert. NC Machining Center [23183]

0M0798 MATERIAL HANDLING (GENERAL)
LOAD BALANCER: 66-88 Lb., INGERSOLL-RAND, No. BSD40, 8' Lift, 2007, Never Used [22438]
LOAD BALANCER: 66-88 Lb., INGERSOLL-RAND, No. BSD40, 8' Lift, 2008, Never Used [22439]
750 Lb., ECOMONY Shop Lift, 24"x 24" Platform [21528]
Shop Lift, 750 Lb. Economy, 24" x 24" Platform, Cable [13999]
750 Lb., Economy, Cable Lift Cart [16502]
800 Lb., MORSE MFG.CO.INC, No. 400A72-120,Drum Handle,Power Lift,115 Volts 60/1 [21877]
1000 Lb., ECONOMY, No. W-54, Die Lift, 54" Lift Height, 24" x 24" Platform [22193]
1500# Hamilton,KS14550,19"x29" Table Top,Hand Crank,Casters [19287]
Lift Table: Economy, 24" x 36" Top, 2000 Lb. Capacity [16500]
2000# Hamilton Die Cart,22"x34" Table Top,Casters,Hand Crank [19286]
2000 Lb., LYON, No. P-24-30-34-54, Hyd. Shop Lift, 24" x 30" Top, 20" Lift [17450]
10,500 # Chain Sling, 4 Drops w/Hooks, 4" Links x 44 Links/Leg (Each) [1453]
ECOA, Hydraulic Elevating Platform, Roller Conveyor [22458]
SAFETY STORAGE CABINET, JUSTRITE, 2-Door, 60 Gallon Capacity, 65" x 34" x 34" [23019]
METAL TUBS, [23131]
SAFETY STORAGE CABINET, JUSTRITE, 55 Gallon, Horizontal, Self-Closing Door [23248]
SAFETY STORAGE CABINET, Eagle, No. 1904, 4 Gallon Capacity [23249]
STORAGE CABINET: STANLEY VIDMAR, Single Door, 3 Shelves, 59"H, Nice [22168]
Die cart [19285]
Die cart [19290]
Safe [21945]

0M1300 MATERIAL HANDLING
NU-STAR, POWER PUSHER, No. STANDARD DUTY,4000 Lbs. of Push Cap., Pneumatic Tires [21361]
Tabar, Dumper, Hyd. [21858]
No. PALLET JACK [22880]
No. PALLET JACK [22881]
No. PALLET JACK [22882]
No. PALLET JACK [22883]
No. PALLET JACK [22884]

0M2824 MILLERS, VERTICAL
TREE,2UV, Step Pulley, 10-1/2" x 42" Tbl.,140 to 3500 RPM,DRO,1 Hp.Power Feed [22741]
MILLPORT, No. 3KVH, 10" x 50" P.F. Tbl., 3 HP, V-Speed 60-4250 RPM, R-8, DRO [22671]
847, INDEX WELLS, [23197]
ACER, No. EVS-3VK, Elect Vari-Speed, R-8, 10" x 50" Tbl, 3 HP, 2001, Nice [22691]
DECKEL, FP1, [21210]
SEERIES I, BRIDGEPORT, 2 HP V-Speed, 9" x 42" Tbl., R-8, Pwr Draw Bar [23218]
SERIES I, BRIDGEPORT, 2 HP Vari-Speed, 9" x 42" P.F. Tbl., Newall DRO, Clean [22660]
SERIES I, BRIDGEPORT, 2 HP V-Speed, 9" x 42" Tbl., R-8 [23217]
SERIES I, BRIDGEPORT, 2 HP V-Speed, 9" x 48" Tbl., R-8, Pwr Draw Bar [23219]
SERIES I, BRIDGEPORT, 2 HP V-Speed, 9" x 48" Tbl. [23220]
BRIDGEPORT, Series II Special, 11" x 58" Tbl., 33" Cross Trav., 1-1/2 HP V-Speed [23200]
SEIKI, No. 3VS, V-Speed, 60-4200 RPM, 10" x 50" PF Tbl., 2-Axis DRO, 1996 [22852]
SUPERMAX, No. YCM-1-1/2VA, 9" x 42" Tbl., Vari-Speed, 2 HP [23225]
YCM-2VA, SUPERMAX, 75-1600 RPM, 11" x 52" Tbl., 3 HP, 40 Tpr, 1990 [22575]
ALLIANT, [22407]
BRIDGEPORT, 1-1/2 HP Vari-Speed, R-8, 9" x 42" Tbl., Pwr Feed X & Y, Clean [22574]
BRIDGEPORT,9"x42" Table,Crome Ways,7" Riser,Var. Speed,Coolant,1-1/2 HP. [22641]
BRIDGEPORT, [22786]
BRIDGEPORT, [23146]
BRIDGEPORT, 1-1/2 HP, V-Speed, 9" x 42" Tbl., R-8 [23246]
HARTFORD, 2 HP, Vari-Speed, 60-4200 RPM, 9" x 42" Tbl., Clean [22489]
HARTFORD, [23241]
KONDIA, 2 HP, Vari-Speed, 9" x 49" Tbl., Mitutoyo 2-Axis DRO, R-8, 1993, Nice [22858]
SUPERMAX, [22406]

0M2833 MILLERS, VERTICAL/UNIVERSAL, N/C & CNC
MITEK, No. VMB30F, 3-Axis, 10" x 54" Tbl., Cat 40, 5 HP, Acramatic 2100, 1999 [23092]
SUPERMAX, No. YCM-16VS, 9" x 49" Tbl., 3 HP V-Speed, PROTO TRAK MX2, 1991 [23243]

0M3203 MISCELLANEOUS
BARGRAPH RECEIVER, Gems Digital Receiver, Model 163000 [22829]
2010, GT Exhaust, Model 201-5104-2, 4" Critical Grade Silencer [22928]
American Fan Co. Blower, Model:SC-800,3/4 HP,1800 RPM, 1phase 115/208-230 [22930]
15 HP Leeson Motor, New,In-box. 1765 RPM, 3 phase, Frame 254T [22931]
Filter, Model: CV6001, Flow: 20 CFM/600L/M, Right Hand Flow, (5) Available [22932]
Ball Screw Jacs, 1 Ton High Lead, New, (6) Available [22937]
Ball Screw Jacs, 1 Ton High Lead, New, (6) Available [22938]
Ball Screw Jacs, 1 Ton High Lead, New, (6) Available [22939]
Ball Screw Jacs,1 Ton High Lead, New, (6) Available [22940]
Ball Screw Jacs, 1 Ton High Lead, New, (6) Available [22941]
Ball Screw Jacs, 1 Ton High Lead, New, (6) Available [22942]
Pillow Block Bearings, Model:MP-63,Shaft Diam. 3-15/16 (2)Available [22952]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22958]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22959]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22960]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22961]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22962]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22963]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22964]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22965]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22966]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22967]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22968]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22969]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22970]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22971]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22972]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22973]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22974]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22975]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22976]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22977]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22978]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22979]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22980]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22981]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22982]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22983]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22984]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22985]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22986]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22987]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22988]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22989]
Screws,No.X1S1016, 5/16 HEX #10x1",Approx.1500 screws per box(33)Boxes Available [22990]
Filter, Model:CV6001, Flow:20 CFM/600L/m, Right Hand FLow, (5) Available [22992]
Filter, Model:CV6001, Flow:20 CFM/600L/m, Right Hand FLow, (5) Available [22993]
Filter, Model:CV6001, Flow:20 CFM/600L/m, Right Hand FLow, (5) Available [22994]
Filter, Model:CV6001, Flow:20 CFM/600L/m, Right Hand FLow, (5) Available [22995]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23011]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23012]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23013]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23014]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23015]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23016]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23017]
100% E-Glass Fiber Techmat, Style: 4003, Roll Length: 75 ft, (8) Boxes Available [23018]
Heavy Duty Wall Louver, No.2047K22, 36x36" opening, (8) Slats [23023]
36" Motorized Damper, Aluminum, Model: 3C131E [23024]
Blower, Model:SC-800, 3/4 HP, 1800 RPM, 1phase, 115/208-230 [23025]
2" NPT Screw Plug Heater, 480v, 9kw, 3ph, (2) Available [23033]
2" NPT Screw Plug Heater, 480v, 9kw, 3ph, (2) Available [23034]
48" Galvanized Wall Shutter, Model: 1C211C [23035]
42 1/2" Galvanized Wall Shutter, Model: 1C210C [23036]
30" Aluminum Wall Shutter, Model: 3C309C [23037]
Roll out shelf [23123]
2006,McLean Air Conditioner,Model:M52-1216-017H,110/115V,50/60Hz,1Phase,12000BTU [23211]
2006,McLean Air Conditioner,Model:M52-1216-017H,110/115V,50/60Hz,1Phase,12000BTU [23212]
2006,McLean Air Conditioner,Model:M52-1216-017H,110/115V,50/60Hz,1Phase,12000BTU [23232]

0M3265 MIXERS, PADDLE
BLACK BROTHERS,Md.PC2,5 gallon,Mixer,Oscilating Blades,Vertical,115-230 60/1 [19139]

0M3277 MIXERS, SOLIDS
125 Cu, Ft. Patterson-Kelly, Twin Shell, Dry Blender,50# per. cu. ft. [17454]
LIGHTNIN,Md. No.316-Reg-153, 15hp. 60/3 125rpm output.,13.97-1 ratio [19299]
TELEDYNE READCO, 10 Qt. Lab. Mixer,S.S. [22690]

0M4553 MOTORS, A.C., SQUIRREL CAGE, 3 PHASE, 60 CYCLE
1 HP, BALDOR, Model:CM3546, 3 PH, 60Hz, 208-230/460 Volts, Spec#: 34G795X269 [22816]
1 HP, BALDOR, Model:CM3546, 3PH, 60Hz, 208-230/460 Volts, Spec#: 34G795X269 [22815]
1 HP. Reliance, A.C. Motor [16127]
5 HP, 1740 RPM, 230/460 V., Allis Chalmers, Frame 184T, Open Drip, (9) Motors [15780]
5 HP. Delco, 1800 RPM, Frame 184T, 230-460, TEFC,C-Frame [15948]
5 HP Baldor, A.C. Motor [16123]
15 HP Baldor,3500 r.p.m.,Frame 254T,230-460V,T.E.F.C. [17558]
20 HP, 1760 RPM, BALDOR, Frame 286-U, [15885]
30 HP, 1160 RPM, BALDOR, Frame 326-T, [15886]
40 HP, Baldor Motor, 1760 RPM, 230/460 Volts [13412]
Motor: Teco, 75 HP, 1150 RPM, 230 V., Frame 405T, [14874]
Motor: Joy, 100 HP, 1778 RPM, 60 V., Frame EB405T, [14873]
100 HP, Baldor,405T frame,1800 R.P.M.,TEFC,240-460V. 60/3 [12842]
200 HP,G.E.,1785 rpm.,Fram 445TZ,open drip,460 volt,double shaft [15677]

0M6698 MOTORS, D.C., VARIABLE SPEED, 500 VOLTS
25 HP, 1180 RPM, Reliance Motor [15281]
Motor [13383]

0M7500 MUFFLER EQUIPMENT
DONALDSON, No. M065071, New-never used, in box. (24) Available [22893]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22894]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22895]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22896]
DONALDSON, No. M065071, New-never used, in box. (24) Available [22897]
DONALDSON, No. M065071, New-never used, in box. (24) Available [22898]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22899]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22900]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22901]
DONALDSON, No. M065071,New-never used, in box. (24)Available [22902]
DONALDSON, No. M065071, New-never used, in box. (24) Available [22903]
DONALDSON, No. M065071, New-never used, in box. (24)Available [22904]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22905]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22906]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22907]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22908]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22909]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22910]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22911]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22912]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22913]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22914]
DONALDSON, No. M065071, New-never used, in box. (24)Available [22915]
DONALDSON, No. M065071, New-never used, in box. (24) Available [22916]
DONALDSON, No. M065071,New-never used, in box. (24) Available [22917]

0N4014 NIBBLERS
9/32"Cap, 48" Throat, PULLMAX, No. P-7, Miscellaneous Tooling, 3 HP, Clean [23135]

0N5225 NOTCHERS, ABRASIVE
4", ALMI, Universal Pipe Notcher, 3/4" to 3" Pipe Capacity, 4 HP, 1999, Clean [22667]

0N5230 NOTCHING MACHINES
ENGEL, No. M-1010LM-MP, Deep Notching, (5) Heads, 18 Ga. Cap., 1989, Nice [20719]
ENGEL, No. 10LM-AP,Power Notcher,Pneumatic Powered, 10', 4 Heads [21912]
New Tennsmith, Tab Notcher, W/ Stand [17323]

0O7397 OVENS, BATCH
19" W. x 19" H. x 19" L., PRECISION, No. 625, 325 Deg. C, S.S., 1 Phase, Nice [22065]
20" W. x 20" H. x 20" L., GRIEVE, No. HA-500-E, Elect., 500 Degrees, Cabinet [21920]
22" x 19.5" x 17.5", GRIEVE, No. FCF-271, 270 Deg. C,, 1998, 1 Phase [19831]
25"W x 25"H x 25"L, DESPATCH, No. VRC1-90-1G, Nat. Gas, 500 Deg. F, 1995 [22618]
25"W x 25"H x 25"L, DESPATCH, No. VRC1-90-1G, Nat. Gas, 500 Deg. F, 1995 [22619]
350 Degree F.,Ele.,25 3/4"x36"x50 1/2" tall inside dis.,single door. [19291]
Batch Oven,Inside Dim. 48" x 151" x 84" Tall,Digital Controls, Nat. Gas [22790]

0P0255 PALLET RACKS
Cantilever Rack, Meco Omaha, 10' Uprights, 24" Arms [22789]
STURDI-BUILT, 18'x 36"W Uprights, 8' & 9' Beams Available [21899]
Cantilever Rack,8' Tall, 24" arms,6-arms per upright, 3-uprights [22698]

0P0499 PAPER SHREDDERS
Security Disintegrator, Model 22, 12" x 20" Opening, 20 HP, Nice [19837]

0P0550 PARTS DRYERS
ADF, No. 2847, (2) 5 HP Regenerative Blowers, 42" Turntable, Heated, 1998 [22353]

0P3454 POLISHING MACHINERY (Incl. Buffers & Lathes, Buffing)
ACME, Double End, Belt Polisher, 2" & 1" Contact Wheels, 7-1/2 HP, Clean [21627]
ACME, Double End, Belt Polisher, 2" & 1-3/4" Contact Wheels, 7-1/2 HP, As-Is [22483]
ACME, Double End, Belt Polisher, 7-1/2 HP, As-Is [22484]
ACME, Double End, Belt Polisher, (2) 2" Contact Wheels, 7-1/2 HP, As-Is [22485]
Divine, Double End [23145]
HAMMOND, No. 5-VRRO, D.E. Buffer, (2) 5 HP Motors, V-Speed 1500-3000 RPM [21248]
HAMMOND, No. 5-VRRO-C, D.E. Buffer, (2) 5 HP Motors, Vari-Speed 750-3000 RPM [21587]
HAMMOND, Double End, Var-Speed [22350]

0P3575 PRESS ACCESSORIES
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21537]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21538]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21539]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21540]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21541]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21542]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21543]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21544]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21545]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21546]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21547]
VIBRO-DYNAMICS, Isolator Type Micro/Level Series BFM 1265 [21548]

0P3626 PRESSES, AIR
CONRAC, No. 020-B-SA500, [22262]
TOX-PRESSOTECHNI, No. MGB-30 [23110]
TOX-PRESSOTECHNI, No. MGB-4, [23109]
TOX-PRESSOTECHNI, No. MGB-50 [23111]
Air Press Bench Md. [23165]

0P3654 PRESSES, ARBOR
3 Ton Dayton Arbor Press,Lever Md. [23164]
FAMCO, No. 1, 3/4 Ton,25-1 Leverage, 1" Square Ram [21179]

0P4827 PRESSES, GAP FRAME, DOUBLE CRANK
220 Ton, AIDA, NC2-200(2), 9.84" Str, 19.6" SH, 25-45 SPM, 95" x 33" Bed, 2000 [22462]

0P4834 PRESSES, GAP FRAME, SINGLE CRANK
35 Ton, BENCHMASTER, 4.25" Str., 12.5" S.H., 14" x 24" Bed, 120 SPM, A.C., 2000 [23094]
35 Ton, BENCHMASTER, 4.25" Str., 12.5" S.H., 14" x 24" Bed, 120 SPM, A.C., 2000 [23095]
35 Ton, BENCHMASTER, 4.25" Str., 12.5" SH, 14" x 24" Bed, 120 SPM, A.C., 2000 [23096]
45 Ton, KOMATSU, No. OBS45, 3.9"Str, 9.8" SH, 80 SPM, 27" x 17" Bed, 1979, Clean [17034]
55 Ton, HEIM, No. 5GA, 3" Str, 17" SH, 120 SPM, 18" x 28" Bed, A.C., Clean, 1991 [23227]
66 Ton, AIDA, No. NC1-6, 3.54" Str., 10.63" S.H., 34" x 15" Bed, 1986 [20833]

0P5051 PRESSES, HORN
40 Ton, ROUSSELLE, Mo. 40-H, 4" Str., 5-1/4" - 16-1/4" SH, 26" x 16" Bed, 1997 [21154]

0P5102 PRESSES, HYDRAULIC
2 Ton, MULTIPRESS, No. WUA-2, 3" Str, 10" DLO, 4-1/2" Throat, Clean [22599]
2 Ton, MULTIPRESS, No. WUA-2TR, 3" Str, 10" DLO, 4-1/2" Throat, Clean [22601]
2 Ton, MULTIPRESS, No. WUA-2TR, 3" Str., 10" DLO, 4-1/2" Throat, 11" x 9" Bed [23051]
8 Ton, MULTIPRESS, 12" Str, 16" DLO, 14" 6-Position Rotary Table, 1992, Clean [21152]
12 Ton, MULTIPRESS, No. WS12, Gap, 12" Str., 18" D.L., 27" x 13" Bed, Clean [20689]
20 Ton, GREENERD, 4-Post, 18" Str, 24" DL, 36" L-R x 16" F-B Between Posts, 1995 [20676]
20 Ton, GREENERD, 4-Post, 18" Str, 24" DL, 30" L-R x 16" F-B Between Posts, 1995 [20677]
20 Ton, MULTIPRESS, No. FH20, Gap, 12" Str, 21" DLO, 25" x 18" Bed, 1980 [20831]
20 Ton, MULTIPRESS, No. FH-20, Gap, 12"Str, 21" D.L., 26" x 17" Bed, 1978, Clean [20074]
25 Ton, ERIE, 4-Post, Upacting, 22" DL, 24" L-R x 16 F-B Bewteen Posts [19925]
30 Ton, GREENERD, No. HC-30-14R, Gap, 12" Str, 24" DL, 26" x 16" Bed, 15 HP, '79 [20587]
37 Ton Elmes Hyd. 4 Post Press,10 1/4"x16 7/8" Bed,App. 6" Str.,Manaul [19633]
50 Ton, DAKE, H-Frame, Hand, 32" Between Uprights, New [20857]
50 Ton, DAKE, No. 50H, H-Frame, Hand, 32" Between Uprights [23075]
75 Ton, DENISON, 15" Str, 50" DLO, 34" x 38" Bed, 40 HP, Clean [20590]
100 Ton, KISEI, 4-Post, 8" Str, 15-3/4" DLO, 31" x 19" Bed, 1991, Excellent [22605]
125 Ton, DAKE, H-Frame [22687]
150 Ton, DAKE, H-Frame Tire Press, Air-Hyd, 30" Dia. Platen, 18" Str., 1992 [23059]
DENNISON, [23169]

0P5298 PRESSES, HYDRAULIC, STRAIGHTENING
10 Ton, EITEL, No. RP10 [22924]
16 Ton, EITEL, No. RP16A [22925]

0P6185 PRESSES, O.B.I., BACK GEARED, SINGLE CRANK
60 Ton, MINSTER, No. 6, 4.5" Str., 13" S.H., 40 SPM, 32" x 21" Bed, Low Price [23182]

0P6200 PRESSES, O.B.I., FLYWHEEL, DOUBLE CRANK
40 Ton, ROUSSELLE, No. 4B60, 18" x 60" Bed, 4" Str, 13.5" SH, 110 SPM, 1993 [21086]
40 Ton, ROUSSELLE, No. 4B60, 18" x 60" Bed, 4" Str, 13.5" SH, 110 SPM, 1993 (2) [21087]

0P6209 PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
5 Ton,Benchmaster,Model 51,Mounted on floor stand,1/3 Hp. 115 Volts [23064]
5 Ton,PRESS-RITE,Model "0",Mounted on floor stand,1/3 Hp. 115 Volts [23063]
5 Ton, ROUSELLE, No.OA, 1-1/4" Str., 3-3/4" SH, 7" x 10-1/2" Bed, 1 Phase [19778]
5 Ton, Rousselle, No. OA, 1-1/4" Str, 4-3/4" SH, 7" x 10" Bed, 1 Phase [17513]
15 Ton, ROUSSELLE,No.2,OBI,Mech. Clutch,2" Stroke,7-3/4" Shut Height. [22887]
18 Ton, L. & J.,O.B.I.,1 1/2" Str.,8 3/4" SH.,18"x11 1/2" Bed,1978,No Controls [20657]
25 Ton, ROUSSELLE, No. 3, 1-1/2" Str.,10-1/4"SH, 14" x 20" Bed, A.C., Clean [21309]
27 Ton, JOHNSON, No.3, 2.5" Str., 9-7/8" SH, 21" x 12" Bed, V-Speed, Mech Clutch [19630]
45 Ton MINSTER, Model #5, 1966, 3" stroke ,10 3/4" SH. Air Clutch, 120 SPM. [19243]
45 Ton, MINSTER, No. 5 [23105]
45 Ton, PERKINS,Md.550-B,4" Str.,8-1/2" SH.,18"x28" Bed,Var-Speed [23097]
46 Ton, FEDERAL, 3" Str., 14.25" SH, 14" x 27" Bed, 120 SPM, A.C., Nice [23106]
60 Ton, FEDERAL, No. 55, 6" Str., 18" S.H., 90 SPM, 28" x 36" Bed, A.C. [18769]
60 Ton, MINSTER, No. 6, 4" Str., 15.5" SH, 90-180 SPM, 32" x 21" Bed [19202]
70 Ton, HEIM, No. 7F, 3" Str., 13" S.H., 32" x 20" Bed, 110 SPM, A.C., 1985 [23226]
75 Ton, NIAGARA, No. ES75, 8"Str, 21" S.H., 36" x 24" Bed, 90 SPM, Low Price [22729]
MABU,10 Ton App.,Stiles Type,1-1/16" Srt.,6"SH.,15-3/4"x8-1/2" Bed,230V 60/3 [21805]

0P7045 PRESSES, SPOTTING
40 Ton, REIS, Up-Acting, 39" x 50" T-Slotted Shuttle Tbl, Swing Down Platen [20729]
100 Ton, DAKE, 60"Str, 84" DLO, 120" X 72" Bed, Flip Out Ram, Sliding Bolster [20352]
REIS, [20699]

0P7135 PRESSES, STRAIGHT SIDE, DOUBLE CRANK (Sgl. Action)
110 Ton, NIAGARA, PN-100-120-24, 3" Str, 18" SH, 24" x 120" Bed, A.C., 1989 [20478]

0P8598 PUMPS (Miscellaneous)
8 GPM, @ 1000 PSI, LATHAM, No. CP-1000S7H, High Pressure Coolant System, 1999 [21457]
GA Spray equipment [19739]
GA Spray equipment [19740]
Grundfas, Coolant Pumps, (27) [16133]
Grundfas, Coolant Pumps [16135]
1/4 HP Gusher, Coolant Pumps, (7) [16136]
1 HP. Gusher, Coolant Pump [16138]
1 HP Gusher, Coolant Pump [16139]
3 HP Gusher, Coolant Pump [16143]
3/4 HP. Ingersoll-Dresser, Coolant Pump [16142]
PRYCO, No. 397-12B, Fuel Pump [22800]
PRYCO, No. 397-12B, Fuel Pump, Never Used [22801]
Viking Pump, W/ 1/2 HP Motor [16149]

0P8745 PUMPS, SUMP, SLURRY
Master Chemical, Yellow Belly Sump Sucker, Fluid Recycling System [20440]

0P8915 PUNCH-SHEARS, IRONWORKERS
3" x 3" x 5/16", MUBEA, No. BF10F, 1-1/4" In 3/16", 6" x 5/16" Flats, Tooling [22807]
3" x 3" x 5/16", SCOTCHMAN, Porta Fab, 45 Ton, Hyd, Punch,Angle & Bar Shear, New [19687]
4" x 4" x 3/8", GEKA, 55 Ton, No. 50/A, Hyd., 10" Throat, Coper/Notcher, Clean [22721]
4" x 4" x 3/8", MUBEA, No. KBL 48-4, 50 Ton, Bar Shear, Coper/Notcher, Clean [23022]
4" x 4" x 3/8", SCOTCHMAN, No. 50514-CM, Hyd., 50 Ton, Punch, Bar Shear, New [19659]
4" x 4" x 3/8", SCOTCHMAN, No. 5014-TM, Hyd, 3-Station Revolving Turret, New [19688]
4" x 4" x 3/8", SCOTCHMAN, No. 50514-CM, Hyd., 50 Ton, Punch, Bar Shear, Notcher [23206]
6" x 6" x 1/2", PEDDINGHAUS Peddimax 110/140, Hyd., 110 Ton Punch, 20" Thr, 2000 [23083]
6" x 6" x 3/8", SCOTCHMAN, No.6509-24M, Hyd., Punch, Bar Shear, New [14307]
6" x 6" x 3/8", SCOTCHMAN, No.6509-24M, Hyd., Punch, Bar Shear, New [21069]
6" x 6" x 1/2", PEDDINGHAUS, No. 210A/20, 94 Ton Pnch, 20" Thr, 10" Plate Shear [22723]
6" x 6" x 1/2", Scotchman No. 9012-24M, 90 Ton, Hyd., Punch, Bar Shear, New [15713]
6" x 6" x 1/2", SCOTCHMAN, No. 12012-24M, 120 Ton, Hyd, Punch, Bar, Angle, New [19689]
6" x 6" x 1/2", SCOTCHMAN, No. DO 70/110-24M, 70 Ton, Dual Operator, New [19690]
6" x 6" x 1/2", SCOTCHMAN, No. DO 120/200-24M, 120 Ton, Dual Operator, New [19691]
6" x 6" x 1/2", SCOTCHMAN, No. DO 8514-20M, 85 Ton, Hyd, Dual Operator, New [19692]
6" x 6" x 1/2" SCOTCHMAN, No. FI8510-20M, Hyd., 85 Ton, Five Stations, New [18376]
6" x 6" x 1/2", SCOTCHMAN, No. DO 95/140-24M, 95 Ton, Hyd, Dual Operator, New [21272]
6" x 6" x 1/2", SCOTCHMAN, No. 12012-24M, 120 Ton, Hyd, Punch, Bar, Angle, New [21534]
PEDDINGHAUS, [23082]
SCOTCHMAN, 6" x 6" x 1/2" Angle Shear Attachment Only [19589]

0P8959 PUNCHES, FABRICATING
DI-ARCRO, No. 1, Hand Punch,4 Ton,6" Throat,16 Ga. Cap. [20263]
Gerver Punch [21465]
5 Ton Pierce-All, Sgl. End Punch, Air Over Hyd., (Multicyl) 12' Measuring Table [17452]
10 Ton,Whitney JENSON,Md. No. 150,24" Throat,Adjusto-Ram Clutch,Clean [20051]
30 Ton, STRIPPIT,Super 30/30 [22349]
STONEGATE, C-Frame Punch Line, (5) 20 Ton, (7) 10 Ton, 10 HP Hyd. Unit, 2000 [21772]

0P9120 PUNCHES, SINGLE END, HYDRAULIC
15 Ton, W.A. WHITNEY, No. 615, 1/4" Capacity, Tooling [23080]
50 Ton, GEKA, Puma 50/E-500, 19-1/2" Throat, 1992, Nice [22672]
70 Ton, MIDWEST, No. 150-80P, 12" Throat [22673]
70 Ton, MIDWEST, No. 150-80P, 12" Throat [22674]
W.A. WHITNEY, [22951]

0R1620 RECYCLING/SCRAP/WASTE EQUIPMENT
OMEGA, No. RSP-100, Solvent Recycling System, 21 LPH, 2001, Nice [22383]

0R1903 REELS, CENTERING
RAPID AIR, No. R36APE, [22204]
600 Lb. Littell, Power Reel [17363]
600 Lb., LITTELL, [18268]
1000 Lb., AMERICAN, No. 60, Non-Motorized, 18" Wide, 14"-21" ID, 54" OD, 1977 [23099]
1600 Lb., CWP, No. 2RD, Plain, Double End, 18" Width, 11.5"-17.5" ID, 48" O.D. [21834]
4000 Lb., LITTELL, No. 40-24, Single End Plain, 24" Width, Elect. Brake [20190]
4000 Lb., PERFECTO, No. 12-M-DB, Double End, Plain, 12" Wide, Elect. Brake [19198]
AIR FEEDS, No. R-60,6000 Lbs. Cap., 18 " Wide,Power [21911]
6000 Lb., AMERICAN, No. 1000, Pwr., 30" Wide, 60" OD, Hyd. Exp., Coil Car, 1984 [20655]
10000 Lb., AMERICAN, No. 1000, 36" Width, Tilt, Hyd Expansion, Coil Car, 1980 [22442]

0R2520 RESISTORS, GROUNDING
NEUTRAL Grounding Resistor, 8000 Volt, 400amp [22834]

0R3400 RIVET SPINNERS
VSI SPINNOMATIC, No. TM-30, .750" Cap., 1 HP, 1800 RPM, 220/440 V 60/3 Phase [21194]
BALTEC,Model RN-280, [23150]
ORBITFORM, [23168]

0R3775 ROBOTS, INDUSTRIAL
No. SF-166, NACHI, 6-Axis, AW11 Control, Teach Pendant, 1085 Hours, 1999, As New [22571]

0R4496 ROLL FORMERS
Flager,Md. A-20,20 Ga. Capacity,5 Stations,Flanging Att. [21613]
7 STND, LOCKFORMER, 16 Ga., 1995 [21517]
7 STND, LOCKFORMER, Pittsburgh & Double Seam, 18 Ga., 2 HP [22398]
9 STND, LOCKFORMER, 20 Ga., Female Snap Lock & 3 In 1 Rolls [19887]
9 STND, LOCKFORMER, Cleatformer, 22 Ga., "S" Cleat, Drive Cleat, Pittsburgh [20200]
9 STND, LOCKFORMER, 20 Ga., Button Punch Snap Lock, 3 HP, 1999 [22103]
9 STND, LOCKFORMER, 20 Ga.,Button Punch Snap Lock, 3 HP, [22396]
14 STND, LOCKFORMER,20 Ga. Cap. [18585]
Lockformer 14DS Fire Damper,14 stations [14363]
22 Ga. Engel, Rollformer [16509]
FLAGLER, [20118]
LOCKFORMER, Clinchlock PL-150 [17692]

0R4704 ROLLS, ANGLE BENDING
2" x 2" x 1/4", HENDLEY & WHITTMORE, Model 20A, Horizontal Angle Roll [22718]
New Ercolina Mdl.CE50MR3, Manual Ring Roller [17093]

0R5603 ROLLS,PLATE BEND'G,INIT.& DBL.PINCH TYPE(Incl.Sheet Mtl.)
3' x 22 Ga., TENNSMITH, No. SR36, Initial, 3 Wire Grooves, New [14928]
4' x 1/4", BALEIGH, No. PR-403, Hyd., DRO Roll Position, 2007 [23255]
5' x 1/4", WDM, Four Roll Double Pinch, Hyd., Pwr Drop End, DRO, New [20286]
4' x 1/2", WDM, No. K-8-4, Hyd., Init., 8" Dia. Rolls, 3-Roll Drive, 7.5 HP, New [21795]
4' x 8 Ga., WDM, No. B-5-48, Initial, Hyd., Pwr Bending Roll Adjust., 3 HP, New [20245]
4' x 12 Ga., WDM, No. B-4-48, Hyd., Initial, V-Speed, Cone Rolling Attach, 2004 [18916]
4' x 12 Ga., WDM, No. B-4-48, Initial, 4" Dia. Rolls, Vari-Speed, 2 HP, New [19821]
4' x 16 Ga., LOWN, No. B-349, Power, Initial, 3" Dia. Rolls, Clean [23186]
4' x 16 Ga., NATIONAL, No. NR4816, Power, 3-Roll Drive, New [20892]
4' x 20 Ga., WDM, No. B-2.6-48, Hyd., V-Speed, Cone Attach, DRO, 3rd Roll Drive [20512]
4' x 20 Ga., WDM, No. B-2.6-48, Hyd., V-Speed, Cone Attach, DRO, 3rd Roll Drive [20513]
5' x 1/4", WDM, No. 101-6-5, Hyd., 6" Dia. Rolls, 5 HP, New [22509]
5' x 1/4", WDM, No. 101-6-5, Hyd., 6" Dia. H & P Rolls, DRO, 5 HP, New [22510]
5' x 5/16", WDM, No. 403-7-5, Hyd., Four Roll, 7" Diameter Rolls, New [21810]
5' x 10 Ga., WDM, No. K-5-5, Hyd., Initial, 3-Roll Drive, Hardened Rolls, New [21097]
5' x 24 Ga., WDM, No. B-2.6-60, V-Speed, Hardened Rolls, DRO, New [21686]
5' x 24 Ga., WDM, No. B-2.6-60, Vari-Speed, Hardened Rolls, Mech. DRO, New [21687]
5' x 10 Ga., WDM, No. B-5-60, Initial, Hyd., 5" Dia. Rolls, 3 HP, New [17797]
5' x 10 Ga., WDM, No. B-5-60, Initial, Hyd., 5" Dia. Rolls, 3 HP, New, In Stock [21526]
6' x 1/4", WDM, No. 101-6-6, Hyd., 6" Dia. Rolls, 3-Roll Drive, New [21678]
6' x 5/16", WDM, No. 101-7-6, Hyd, 7" Dia. Rolls, 3-Roll Drive, Cone Attach, New [21680]
6' x 3/8", WDM, No. K-8-6, Hyd., Initial, 8" Dia. Rolls, 3-Roll Drive, New [21268]
6' x 1/2", WDM, No. 100-9-6, Hyd. Pinch Pyramid, Side Supports, Made To Order [21022]
6' x 16 Ga., LOWN, No. B-474, 4" Dia. Rolls, 3-Roll Drive, Drop End, Clean [23039]
6' x 16" Ga., NATIONAL, No. NR7216, Power, 4" Dia. Rolls, 3-Roll Drive, New [20893]
8' x 3/8", WDM, No. 100-9J-8, Hyd., 3-Roll, Vari-Speed, Pendant, DRO, New [20681]
8' x 10 Ga., NIAGARA, No. 6-96, Initial, 6" Dia. Rolls, 25 FPM, 7-1/2 HP, Clean [22392]
10' x 15/64", BERTSCH, No. 7, 8" Dia. Rolls, Initial, Air Drop End, Clean [22461]
10' x 1/2", WDM, No. 101-11-10, Hyd. Pinch Pyramid, 3-Roll, 11" Rolls, New [21227]
10' x 1/2", WDM, No. K-12-10, Hyd., Initial, 3-Roll, 12" Rolls, New [21228]
10' x 19/32", WDM, No. 403-13-10, 4 Roll, Hyd., 13" Dia. Roll, New, In Stock [22616]
10' x 10 Ga., WDM, No. 100-6-10, 3 Roll, Hyd., 6" Dia. Rolls, New [17633]
10' x 14 Ga., WDM, No. B-6-120, Hyd., Three Roll, Swing-Out Top Roll, New [20514]
12' x 1/4", BERTSCH, Initial, 9" Dia. Rolls, V-Speed, Air Drop End, 10 HP [21085]
12' x 1/4", WDM, No. 100-8J-12, Hyd., Pinch Pyramid, 8" Dia. Rolls, 7.5 HP, Demo [21343]
12' x 29/64", BERTSCH, No. 11, Init., 13-1/2" Dia. Rolls, Air Drop, 1967 [21969]
42", TENNSMITH, No. SR42 [15844]
4' Carando, Tru-Circle, 20" Dia. x 38"L x 13 Ga. Capacity M.S., Feed Table [12450]

0R5640 ROLLS, POWER TANK TURNING
4000# PANDJIRIS,Md.400,Steel Wheels,Var.-Speed,115 Volts 60/1 [20680]
4400 Lb., VANGUARD, No. HGK2, 10"-70", V-Speed 4-40 IPM, Rubber Tires, New [21089]
4400 Lb., VANGUARD, No. HGK2, 10"-70", V-Speed 4-40 IPM, Rubber Tires, New [21864]
11,000 Lb., VANGUARD, No. HGZ5, Self-Aligning, 3.94" x 9.84" Wheels, Rubber, New [20025]
10 Ton, VANGUARD, No. XHGK-10, Rubber Tire, Adjustable Centers, Vari-Speed, New [21727]
10 Ton, VANGUARD, No. HGK-10, Rubber Tire, Adjustable Centers, Vari-Speed, New [21748]
10 Ton, VANGUARD, No. HGK-10, Rubber Tire, Adjustable Centers, Vari-Speed, New [21798]
11 Ton, VANGUARD, No. HGZ10, Self-Alignment, 4.72" x 11.81" Wheels, Rubber, New [20026]
22 Ton, VANGUARD, No. HGK-20, 19"-138", Rubber Tire, Vari-Speed, Pendant, New [20727]
44 Ton, VANGUARD, No. HGK-40, 24"-165", Rubber Tire, Vari-Speed, Pendant, New [20906]
(1) Set Aronson, Tank Rolls [16951]
(1) Set Aronson, Tank Rolls [16952]

0R8903 ROUTERS
No. ACCU-ROUTER, POWERMATIC,4' x 8' Tbl.,15 Hp. Spindle [23207]

0S0453 SANDERS, DISC, METAL
GARDNER, No. 5, 18"Dia, 3 HP, 6" x 21" Table [22162]

0S0555 SAWS, ABRASIVE & FRICTION
12", EVERETT, No. 12S, 1 Phase [22576]
13" Marathon, MC-325-PV, Airvise, Swivel, 2- Speed, 30-60 RPM, As-Is, Needs Repa [13012]
14-16", EVERETT, Straight Cut, 2" Solids, 5" Shapes, 7-1/2 HP, Chain Vise, Clean [22298]
16/18", KALAMAZOO, No. KM16-18, Miter, 3" Solids, 4-1/2" Shapes, 10 HP, Nice [22686]
16", STONE, No. M-750, Miter, 2-1/2" Solids, 4" Structurals, 7-1/2 HP, Clean [22755]
BUEHLER, No. OSCILLAMET, 460 V 60/3 Phase [20948]

0S0653 SAWS, BAND, HORIZONTAL
4" x 10", FMB, PHOENIX, Miter, 8" Rounds, 1-1/16" Blade, 2 Speeds, 1 HP, New [21387]
4" x 10", FMB, PHOENIX, Miter, 8" Rounds, 1-1/16" Blade, 2 Speeds, 1 HP, New [21975]
8" x 8", BTM, No. 280MDSSA2, Double Miter, 8-1/2" Rounds, Coolant, New [21064]
8.5" x 8.5", TUBEMART, No. BE27DSN, Dbl. Miter, 1" Blade, 1.5 HP, New [21106]
8" x 13.5", BTM, No. 370MDSSA2, Double Miter, 1" Blade, New [20083]
8" x 13.5", BTM, No. 370MDSSA2, Double Miter, 1" Blade, New [20991]
KALAMAZOO,Md. 816S,8" Rounds,8"x16" Flats,Dry,1-Speed,1 Hp. 115-230 60/1 [21942]
9-1/2" x 11", WELLS, No. 58BD, Horizontal/Vertical, 1/2" Blade, Dry, 1/2 HP [22519]
9" x 16", KALAMAZOO, No. H9AW, 1" Blade, 60-340 FPM, 2 HP, Coolant, 1994, Clean [22630]
9" x 16", KALAMAZOO, No. H9AW, 1" Blade, 60-340 RPM, 2 HP, Coolant, 1993 [22681]
10" x 10", TUBEMART, No. BE350DSA, Dbl Miter, Semi-Auto, 1" Blade, 2 HP, New [21108]
10" x 16" Wellsaw, No. 1016, 50-275 FPM, 1" Blade, Wet, 2 HP, NEW [14461]
10" x 16" WELLSAW, No. 1016, 50-275 FPM, 1" Blade, Coolant, 2 HP, New [22430]
13" x 16", WELLSAW, No.1316S, Miter, 70-375 FPM, 1" Blade, Coolant, 3 HP, New [22423]
14" x 14", VANGUARD H-360HA, Auto. Fd, Bundling, 1.25" Blade, 5 HP, New [20305]
20" x 28", BTM, Semi-Auto., Double Miter, 20" Rounds, 65-330 FPM, New, In Stock [21061]
25" x 36", W.F. WELLS, No. B-25-1, Miter, 1-1/4" Blade, 40' Infeed/Outfeed, 1989 [22920]

0S0690 SAWS, BAND, VERTICAL
16", DoAll No. 16-3, 21" Under Guide, 35-6000 FPM, 26" x 33" Tbl, 1" Blade, 3 HP [22877]
16", DAKE/JOHNSON, No. F-16, V-Speed 60-550 FPM, 26" x 26" Tbl, New, In Stock [21277]
16", DAKE/JOHNSON, No. F-16, V-Speed 60-550 FPM, 26" x 26" Tbl., New [21868]
16", DAKE/JOHNSON, No. V-16, 11" Work Height, 60-590 FPM, Welder, Excellent [22734]
16", DOALL, No. 1612-3, Contour-Matic, Hyd. Table, 3 HP, Welder, Clean [22692]
18" x 20", MARVEL, No. 81A10 PC, Tilt, Auto Bar Feed, 10 HP, 1-1/4" Blade, 1986 [21633]
18" x 20", MARVEL, No. 81A11 PC, Tilt Frame, Prog. Bar Feed, 10 HP, 1993 [21928]
20", CLAUSING STARTRITE, No. V500H, 14" Under Guide, 50-5200 FPM, Hyd Tbl, 1995 [23043]
20", DOALL, 2013-V, 13" Under Guide, 55-2200 FPM, 26" x 26" Tbl., 1994 [21003]
26", DOALL, No. 2614-1, 14" Under Guide, 25-6000 FPM, Gov't Storage, 1980 [23058]
30", KALAMAZOO, No. 30R, 10" Work Height, 60-3600 FPM, 21" x 21" Tbl, 1-1/2 HP [20155]
36" DO-ALL, 36-W Zephyer,Blade Welder,Var-speed,60/3 [21623]
36", TANNEWITZ, No. 3600MH, Pwr Tbl Feed, 45-9000 FPM, 13" Under Guide, 10 HP [20849]
52", TANNEWITZ, No. S1NE, 20" Work Thickness, 7500 FPM, 1974 [22322]
60", Tannewitz No. 60MH, 13" Under Guide, 55-10,000 FPM, Hyd Tbl Feed, 7.5 HP [18762]
18", GROB, NSR1,3200 FPM. 32"x32" Tbl.,14 1/4" under guide,I Hp. 110 Volt Motor [21394]

0S0730 SAWS, CIRCULAR COLD
14", SCOTCHMAN, No. CPO-350 VSPKPD, 2011, [22848]

0S0805 SAWS, COLD & CARBIDE
10", SCOTCHMAN, No. CPO 275LT, Miter, 30/60 RPM, 1.5" Solid Rounds, Coolant, New [18001]
10", SCOTCHMAN, No. CPO 275LT, Miter, 30/60 RPM, 1.5" Solid Rounds, Coolant, New [21276]
10", SCOTCHMAN, No. CPO275SS, Miter, 60 RPM, 1.5" Solid Rounds, Coolant, New [22270]
12", ADIGE, No. CM-500A, 1991,Automatic, Magazine Loading, 3.5" Round, 1991 [20035]
12", SCOTCHMAN/BEWO, No. 315 AF, Auto. Fd., 3.5" Cap. Tube, 23/46 RPM, Clean [21165]
14", MEP, No. 350CNCFE, Programmable, Miter, 4-1/2" Rounds, 3-3/4" Square, Clean [22097]
14", SCOTCHMAN, No. CP0 350 LT/PK/PD, Pneu. Down Feed, Air Clamp, New [20909]
14", SCOTCHMAN, No. CPO 350LT, Miter, 22/44 RPM, 2" Solid Rounds, Coolant, New [14312]
25", TRENNJAEGER, No. PMC8-N, 8" x 24" Cap., Miter, Turntable, In/Out Conveyor [22307]
SCOTCHMAN, Advanced Feed System, Programmable Stop, 16' Working Length [20843]

0S0825 SAWS, COLD & CARBIDE (NON-FERROUS)
10", SCOTCHMAN CPO 275HTPK, Miter, 2 Speed 60/120 RPM, Coolant, New [20624]
14", SCOTCHMAN CPO 350 NF, Miter, 1500/3000 RPM, 3" Solid Rounds, 3 HP, New [20928]
14", SCOTCHMAN CPO 350 NFPKPD, Miter, 1500/3000 RPM, Coolant, 3 HP, New [20845]
14", WEGOMA, No. SD16S, Dbl. Head, Miter, Adjustable Cutting Length, 1993 [23189]
17", ELUMATEC, No. TS 107, Vee-Notch, 4.5" x 4.5" x 7.75"H Capacity, 5 HP, 1997 [23191]
20", WEGOMA, No. SD500, Dbl. Head, Miter, Adjustable Cutting Length, 3 HP, 1992 [23187]
ELUMATEC, No. MMS200, Stop and Measuring System [23194]
EMMEGI MICROBO 4200DX, Stop Gauge [23192]
EMMEGI MICROBO 4200SX, Stop Gauge [23193]
PISTORIUS [23208]
WEGOMA [23190]

0S1203 SAWS, RADIAL ARM
DEWALT, No. 3500, 16" Blade Capacity, 3 HP [23199]
DEWALT, No. 3561, 16" Blade Capacity, 5 HP [23198]
DEWALT, No. GE-55, Metal Cutting [23077]
DEWALT, [22408]
TOPS Retracto-Glide Radial Arm Saw, Md. 45385MC,18" Blade, 5 HP. 60/3 Motor [22610]

0S1402 SAWS (Woodworking)
TABLE SAW, DELTA, 10", [18621]

0S1504 SCALES
5000 Lb., METTLER-TOLEDO,Md.VLF, Platform,Counting Scale,115 Volts 60/1 [21431]
10000 Lb., [22635]
20000 Lb., CHECKMATE, No. CM-20K, Digital Crane Scale [18618]

0S2003 SCREW DRIVERS
No. SD-110, DIXON, [23149]

0S3804 SHEARS, FOOT POWER
36" x 16 Ga., PEXTO, No. 0236F, Front Supports, Manual Foor Shear [22639]
16 Ga. x 52", NATIONAL, No. N5216, Back Gauge, Front Supports, New [20867]
16 Ga. x 52", NATIONAL, No. N5216, Back Gauge, Front Supports, New [21989]
16 Ga. x 52", NATIONAL, No. N5216, Back Gauge, Front Supports, New [21990]
16 Ga. x 52" Tennsmith, Front Supports, Back Gage, New [14053]

0S3900 SHEARS, HAND
B-3 Beverly Throatless Shear, 3/16" Cap. Mild Steel,10 Ga. S.S.,Hand Operated [22739]
16 Ga. x 36", DiAcro, No. 36, Hand Shear, 25" Back Gage, Factory Stand [21292]

0S4104 SHEARS, POWER SQUARING (Gauges)
10 Ga. x 52", NATIONAL, No. NH5210, Hyd., Back Gauge, Front Arms, New [20871]
10 Ga. x 52", NATIONAL, No. NH5210, Hyd., Back Gauge, Front Arms, New [21992]
12 Ga. x 36", NATIONAL, No. NA3612, Air, Back Gauge, Front Arms, New [20894]
12 Ga. x 36", NATIONAL, No. NH3612, Hyd., Back Gauge, Front Arms, New [20868]
12 Ga. x 52", NATIONAL, No. NA5212, Air, Back Gauge, Front Extensions, New [20896]
12 Ga. x 52", NATIONAL, No. NH5212, Hyd., Back Gauge, Front Arms, New [20870]
14 Ga. x 48", NIAGARA,18" R.O.M.B.,1-1/2 Hp.Mag Ele. Controls [23251]
14 Ga. x 72", NIAGARA Series 1 Model 16, Mech., 36" Front Operated Back Gauge [22791]
14 Ga. x 72", NIAGARA, Series 1 No. 16, 36" FOMBG [22792]
16 Ga. x 52", NATIONAL, No. NA5216, Air, Back Gauge, Front Extensions, New [20895]
16 Ga. x 52", NATIONAL, No. NH5216, Hyd., Back Gauge, Front Supports, New [20869]

0S4105 SHEARS, POWER SQUARING (Inches)
3/16" x 10', CINCINNATI, No. 1410, FOPBG, Sq. Arm, Front Supports, Nice [22728]
1/4" x 4', NATIONAL, No. NH4825, Hyd., Manual Back Gauge, New [20872]
1/4" x 6', NATIONAL, No. NH7225, Hyd., Back Gauge, Front Supports, New [20873]
1/4" x 8', NATIONAL, No. NH9625, Hyd., Back gauge, Front Supports, New [20874]
1/4" x 10', NATIONAL, No. NH12025, Hyd., Back Gauge, Front Supports, New [20875]
1/4" x 10', NIAGARA, No. 810, FOPBG, Sq.Arm, Front Supports, 1977, Clean [21147]
1/4" x 12', CINCINNATI, No. 2CC12, Mech., FOPBG, Sq. Arm, 1990, Clean [22238]
1/4" x 12', WYSONG, No. 1225, Mech., 48" FOPBG, Sq. Arm, Front Supports, 1984 [21602]
3/8" x 4', CINCINNATI, No. 2504R, FOPBG, Sq. Arm, Front, Supports, 7-1/2 HP [22093]
1/2" x 2', SCOTCHMAN, No. 610, Hyd., 12" x 1" Cap., Back Gauge, 10 HP, New [21274]
1/2" x 10', AMERICAN HERCULES, Hyd., Flush Floor, 36" FOPBG, 30 HP [19891]
1/2" x 10', CINCINNATI CENTURY, Hyd., FOPBG, Squaring Arm, Front Supports [22921]
5/8" x 10', STANDARD INDUSTRIAL, No. AS625-10, Hyd., 48" FOPBG, Sq. Arm, 1997 [22919]

0S4157 SHEARS, ROTARY (Incl. Ring & Circle) (Inches)
12 Ga. Cap, Marshalltown,Model 12-BM,Throatless Shear,App. 1 Hp. 110 Volt 60/1 [21914]

0S4640 SHEET METAL FORMING MACHINERY
AUTO FOLD, No. AF-516, Autofold HVAC Coil Line [23144]
TOWNSEND, No. 312E, Shrinker/Stretcher, Elect., 12" Throat, .109" Capacity [21743]

0S4654 SHEET METAL MACHY.
NOTCHER: 6" x 6" x 16 Ga. GERVER, No. GH-1P, Pneumatic Operation, Clean [21463]
ROTARY MACHINE, TENNSMITH, No. PR16, 16 Ga., 10" Throat, V-Speed, 1/2 HP, New [21080]

0S4670 SHEET METAL MACHY., HAND OPER.
PIPE FOLDER, PEXTO,No. 13, 42" 24 Gauge Soft Steel [21614]
BTM,Tog-L-Loc,Sheet Metal Joining System,6" Throat,2" Str, Hyd.,1.5 Hp.,60/1 [21448]

0S5354 SLITTERS
Wilder No. 2024, Power, 20 Ga., 24" Max. Slit Width, 90 SFM, 1/3 HP, New [16505]

0S6410 SPRING ISOLATION MOUNTS
CALDYN, No.RJB511T, Max. Load:511(lbs.) (4)Available [22840]
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available [22955]
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available [22956]
CALDYN, No. RJB511T, Max. Load:511 (lbs.), (4)Available [22957]
CALDYN,NO. RJC2120T, Max Load: 2120 Lbs., (2)Available New/Never Used [22838]
CALDYN, No. RJC2120T, Max. Load 2120 Lbs., (2) Available, New/Never Used [22954]
CALDYN TJE6080T,Spring Isolation Mount: Color-Black w/4 Gray Spring (2)Available [22841]
CALDYN TJE6080T,Spring Isolation Mount: Color-Black w/4 Gray Spring (2)Available [22918]
SPRING ISOLATION MOUNT: Cali. Dynamics, (4) Available [22844]
Kinetics, Type SM, Size:3500C,Rated Load:3500, (4) Available [22833]
Kinetics, Type SM, Size:3500C, Rated Load:3500, (4) Available [22835]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23026]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23027]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23028]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23029]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23030]
KINETICS, Type SM, Size:3500C, Rated Load:3500, (4) Available [23031]
VMC, Model:LKD-57, Color-Black w/ Blue Springs, Spring:2" diameter [23032]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [22846]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [22996]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [22997]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [22998]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [22999]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23000]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23001]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23002]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23003]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23004]
VMC, No.M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 LB. Rating, Unused [23005]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [23006]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [23007]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [23008]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [23009]
VMC, No. M2SS-1E-4000, Seismic Restraint, Two Spring, 4000 Lb. Rating, Unused [23010]
SPRING ISOLATION MOUNT: VMC, (6) Available [22845]
SPRING ISOLATION MOUNT: VMC, Color-Black w blue springs [22839]
SPRING ISOLATION MOUNT: VMC, Gray w/ orange & gray springs, (10) Available [22843]
SPRING ISOLATION MOUNT: (6) Available, Color: Blue w/ purple springs [22836]
SPRING ISOLATION MOUNT: Color-Green w/ yellow springs, (2) Available [22837]

0S7398 STITCHERS
ACME INTERLAKE, No. S5A-20P,Box Stitcher [21918]
STANLEY-BOSTITCH, No. S25-SAW,26" Throat,1/2 Hp. 115 volts 60/1 [22611]

0S7748 STRAIGHTENERS, FLAT & SHAPE
4.8" x .040", BRUDERER, Precision, No. 1012B, 19 Rolls, Vari-Speed, 1977 [16478]
12" x .090" FEED LEASE, FLPS-1-3/4-12-11, 11 Rolls x 1.75" Dia., Loop, 1999 [19443]
12" x .1496", NIAGARA, No. 350-7-12,2-sets power pinch rolls,7 straigh Rolls [19492]
PERFECTO, [21192]

0S8650 SWAGERS
1-3/4", FENN, No. 3-1/2, Long Die Rotary, 4-1/2" Die Length, 5 HP [22886]

0S8904 SWITCHES, ALL TYPES
400 Amp, ITE, No. F355, 600 V, 3 Pole, Fusible [22404]

0T0104 TABLES, FLOOR & LAYOUT PLATES (Rad. & Bor. Mill)
ANGLE PLATE, 17-3/4" x 39-5/8" Base, 17-3/4" x 43" Upright, 1" Thick [2731]
ANGLE PLATES: 84"W x 66-1/2"T x 29-1/2" Thick, Vertical, T-Slotted [14379]
Box Table [15070]
Box Table [15071]
Box Table, Universal, 20" x 20" Top, 22" High [13163]
26" x 28-1/4" Plain Box Table [16450]
18" x 24" x 6",Starrett Crystal Pink Granite Surface Plate [16200]
18" x 24-1/4",Collins, Micr-O-Flat Granite Surface Plate, Black,2 Ledge,Class A [22124]
4' x 8'X 20" Granite Surface Plate, Herman, Grade A, Thread Insert Holes, 9000 # [13915]
GRANITE SURFACE PLATE, Herman, 36" x 60" x 10" Thick, (4) Ledges, Stand [20963]
12" x 18" x 4-1/2",GRANITE, HERMAN STONE,2-Ledge,Grade A [22120]
GRANITE SURFACE PLATE, 18" x 24",Rock of Ages,2 Ledge, Stand [22002]
24" X 18" X 5-3/4",Starret Granite Surface Plate,Crystal Pink,Grade A [22126]
GRANITE SURFACE PLATE, 24" x 36", Grey Granite, 4 Ledges, Stand [22000]
GRANITE SURFACE PLATE, 18" x 23-1/2", Stand [22003]
18" x 18" X 4-1/4" Granite Surface Plate, Black, [22123]
GRANITE SURFACE PLATE, DOALL, 24" x 36", Black Granite, 2 Ledges, Grade B, Stand [21964]
GRANITE SURFACE PLATE, DOALL, 36" x 72" x 10" Thick, Grade A, (2) Ledges, Stand [22603]
GRANITE SURFACE PLATE, TRU-STONE, 24" x 36", Black, Grade B, Stand [22379]
GRANITE SURFACE PLATE, 48" x 72" x 7-1/2" Thick, Grade A, (2) Ledges, Stand [22604]
7'W x 5'-6-1/2"T x 29-1/2" Thick, T-Slotted [14380]
Plain Table, 30" x 48" x 3" High, Oil Groove [16555]
Universal Box Table [12947]
30" x 48" Cast, Surface Plate, W/Rolling Stand [17122]

0T0140 TABLES, ROTARY
15", Horizontal/Vertical [22625]
18" Troyke,Md. BL-18 [19623]
20", CINCINNATI, [22290]
42" Diameter, Farmington Mdl. STR-4200, Air Lift, Tilting [14856]
48" x 60", G. & L., Air Lift, (6) T-Slots, Nice [22712]
50" x 50", Cinti.-Gilbert, Air Lift, Beveled Corners, (6) T-Slots, 14" High [15018]
78" x 78" G. & L., Air Lift Table [15839]
84", Rotab, No. 84-5, Power Tilt, Power Rotate, T-Slots, Pendant Control [2554]

0T0165 TABLES, WELDING
Welding Table, 54"x60" Top,5/8" Thick Top,33" Tall,Leveling Screws [22699]
Welding Table,48"X82-1/2" Top,3/4" Thick Top,Leveling Screws [22700]
Welding Table,54"x60" Top,3/4" Thick Top,36-1/2" Tall,Bottom Shelf [22701]
Welding Table,72" X 64-1/2" tOP,3/4" Thick Top,29-1/2" Tall,Bottom Shelf [22702]

0T1103 TANKS, S.S., HASTELLOY,MONEL,ALUM.,TITANIUM,NICKEL,etc.
180 Gallon,150 Gallon Working,30"x60" Tank Size,Vert.Tank,SS,Mounted on legs [20772]

0T1205 TANKS, STORAGE
250 Gal., VICTORY, 41" x 110" x 23"H, For Fuel Storage, Vented, New/Unused [22991]

0T1495 TAPPERS
No. BT1-203, BROTHER, #0 to 1/2" NC Capacity, 8" x 9" Tbl., 1/2 HP [22184]
SNOW,Tapper, Md. TA-1 [22376]
SNOW, [22377]

0T1753 TAPPING HEADS
Hause, Tapping Head [15960]
Hause, Tapping Head [15962]
Hause, Tapping Head [15963]
ZAGAR, [19700]
ZAGAR, [19701]

0T2154 TESTERS, HARDNESS
CLARK, No. CTT8, [23157]
WILSON ROCKWELL, No. C503-T, [23158]

0T2205 TESTERS (Miscellaneous)
Kinball [19832]
Link, Spring Tester [17298]
DETROIT, [21702]

0T2306 TESTERS, TENSILE
THWING ALBERT, [22664]

0T2520 THREAD ROLLERS
1/32"-1/2" x 1-1/4", YIEH CHEN, No. YC-3T, 2-Die, 40 RPM, 1994 [22025]
3/16"-7/8" x 1-7/8", YIEH CHEN, No. YC-20, 2-Die, 40 RPM, 1994 [22027]
3/16"-7/8" x 1-7/8", YIEH CHEN, No. YC-20, 2-Die, 40 RPM, 1994 [22028]

0T2805 THREADERS, PIPE (Incl.Nipple Mach., Pipe,Tube Cutters)
2", OSTER, [23085]
2", RIDGID, No. 535, Pipe and Bolt, Universal Head, Cutter, Reamer [23244]
2", RIDGID, No. 535, [23245]
300 Ridgid [22540]
300 Ridgid [22541]
300 Ridgid [22542]
300 Ridgid [22543]
300 Ridgid [22544]
300 Ridgid [22545]
300 Ridgid [22546]
535 Ridgid [22539]

0T3953 TOOLING & ACCESS.
Turret Attachment: Enco 651, 6 Pos., Fits 13" Clausing [1160]
ANGLE PLATES, 18"H x 18"W x 12"D, T-Slotted [23138]
COLLET CHUCK, HARDINGE, L-1 Nose, Large Lot of 5C Collets [22855]
12" CINCINNATI DIVIDING HEAD, NO TAILSTOCK [17965]
DIVIDING HEAD, L&W, [20346]
Drum Opener: Wizard, Model G, Power, 1 PH. [2007]
Weldon , Grinding Attachment [14201]
PARTING/CUT-OFF TOOL, HARDINGE, [18096]
RADIUS TURNING ATTACHMENT, HARDINGE, [18094]
STEADY REST, Fits 15" CLAUSING COLCHESTER, 6-1/4" Hole, Roller Style [22864]
STEADY REST,21" CLAUSING COLCHESTE LATHE,9-1/2" Hole, Roller Style [22862]
Steady Rest, Off 36-1/2" Swing 25N Monarch Lathe, Heavy Duty, 7.5" Hole [13486]
STEADY REST, Fits CLAUSING COLCHESTER 17" LATHE, 12-3/4" Hole, Brass Bushing [22861]
TAILSTOCK, G & L, [21426]
TAILSTOCK, Off of 5" G. & L., [21425]
LEAD SCREW TAPPING ATTACHMENT, PROCUNIER, Size 3.Mounted on a Drill Press [22375]
Tracer: Colchester Mimik, Lathe Tracer [14692]
Tracer: Lathe [14693]
TURRET ATTACHMENT, 6 POS. FITS 18" SWING LATHE [2994]
Vertical Head: Cincinnati No.3 Or 4, 50 Taper [17319]
Vertical Head: Cincinnati, No.3 Or 4, 50 Taper [17320]
10" Cincinnati, 50 Taper [1684]
TURRET ATTACHMENT: ENCO 650, 6 POSITIONS, FITS 17" CINCINNATI [2290]
Face Plates: Off L&S "T" Lathe, (2) 37" x 42" Dia. [1151]
Face Plate: Off L&S "T" Lathe, 37" Dia., 12" Hole [1155]
TST,8 1/4" Super-Spacer,Hor. or Vert. Mount,Index Plates,3-Jaw Chuck,Nice [20062]
Spacing HeadL 17" Swing, 24 Divisions, 10" 30 Jaw, Center [1677]
Face Plate Jaws, 8" x 10" Base, W/12" Risers, Off 72" V.B.M., (4 Pcs.) [2736]

0T3980 TOOLING & ACCESSORIES, N/C & CNC
TOOL SETTER, DEVLIEG, [23122]

0T5053 TRANSFORMERS, SINGLE PHASE, 60 CYCLE
5 KVA, EMERSON, [22495]
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H [22745]
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H [22746]
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H [22747]
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H [22748]
15 KVA, Pri. 480 V, Sec. 240 V,120 V, SQUARE D, DRY,Cat. No. 15S1H [22749]
15 KVA,Square D, Pri 480 Sec 240 to 240 to 120, Single Phase, Dry Type [23167]
15 KVA, ACME [22494]
25 KVA, SQUARE D, DRY, 480/240 to 240/120, 1 Phase, Cat. No. 25S3H [22402]
167 KVA,Federal Pacific,1 Phase,480-240-120 Volts, Dry Type [22612]

0T5301 TRANSFORMERS, 3 PHASE, 60 CYCLE, DRY TYPE
Transformer: 12-1/2 KVA, 3 Phase [14783]
15 KVA, Pri. 480 V, Sec. 208 V,120 V, Federal Pacific,Cat. No.T4T15E [22750]
20 KVA,Dongan, Pri 480 Sec 380, 60/3 Cat.No.63-20-1892FM [21207]
22.5 KVA, SQUARE D, Pri 480, 208Y/120 Sec., MPZ22T2F Mini Power Zone, Never Used [22821]
22 KVA, SQUARE D, Pri 480, 208Y/120 Sec., MPZ22T2F Mini Power Zone, Never Used [22823]
27 KVA,Hitran,460,230, to 230,133 Volts,60/3 Phase [21577]
30 KVA, Pri 480, 208Y/120 Secondary, MPZ30T2F Mini Power Zone, Never Used [22802]
30 KVA,Amce, Pri 480 Sec 240 Three Phase,Dry Type [23166]
30 KVA, SQUARE D, Pri 480, 208Y/120 Sec, MPZ30T2F, Mini Power Zone, Never Used [22822]
45 KVA, CUTLER-HAMMER, Cat. No. V48M28T45, Pri 480 Sec 208Y/120, Never Used [22764]
45 KVA, G.E., Pri 480, Sec 240, 60 Hz, 3 Phase, Cat. No. 9T23B3883 [21416]
75 KVA, Culter Hammer,240 Volt to 208 Volt, 60/3, Dry Type [22569]
75 KVA.Dongan,3 phase,600v to 240v,480v,no taps [16368]
75 KVA, GE 240-480 Volt, 3 Phase [21646]
300 KVA, Pri 480 Sec 240, Square D [22399]

0T6298 TRUCKS, LIFT, GAS OR ELECTRIC
3500 Lb TOYOTA, No. 5FGC18, Triple Stage Mast, Hard Tire, Gas, Side Shift [22537]
5000 Lb HYSTER, Electric, 2-Stage Mast, 48 Volt,t42" Forks, Charger, 1991 [22696]
5000 Lb TOYOTA, Hard Tire, Triple Stage Mast, LP Gas, Side Shift, 1996, Clean [23081]
6000 Lb HYSTER, No. H60XM, Cushion Tires, Triple Stage Mast, S.S., LP, 1996 [22633]
8000 Lb., HYSTER, No. S80B, 72" Mast, 96" Lift, Hard Tire, LP Gas, Clean [21792]
8000 Lb YALE, No. GLC080, Hard Tire, Triple Stage Mast, S.S., LP, Clean, 1999 [22682]
12000 Lb, HYSTER, No. S120XL2, Hard Tire, LP Gas, Triple Stage Mast, 1992 [22486]
12,000 Lb., Towmotor [21707]

0T6653 TUBE EXPANDERS
TUBEMART, [21114]

0T8653 TUMBLING BARRELS
RAMPE, [21267]

0V2753 VIBRATORS, VIBRATORY FINISHERS
3.5 CuFt, FINISHING PRODUCTS, 32"L x 16"W x 12"D, Urethane Lined, Timer, Clean [20534]
GIANT,Vibratory Cob Dryer,Md. GB8,8 Cu. Ft.,3hp. [21133]
GIANT,Vibratory Cob Dryer,Md. GB7,8 Cu. Ft.,3hp.Less Oil Heater [21134]
ALMCO,Model: OR-9VLR,New 1995, Long Bowl [23147]
10 CuFt, VIBRA-FINISH, No. VF-10, Bowl Type, Urethane, Seperator, 10 HP, 1991 [21491]
ALMCO, Tub [22287]
DIA-MIYANO, No. DS8-100,4-Barrels,Centrifugal Fine Finishing,5.5 KW.Motor,1989 [20766]
Vibratory Tub, No. COF-9, 1 HP, 3450 RPM, 208-230/460 V 60 3 Phase [21412]

0W0504 WASHING EQUIPMENT
PARTS WASHER, AUTOMATED FINISHING, No. 2954, [19987]
PARTS WASHER, MARK ONE, [19992]
PARTS WASHER, MARK ONE, [19993]
PARTS WASHER, RANSOHOFF, IMMERSOJET, Rotating Basket, Wash, Rinse, Blow Off,1994 [21628]

0W0605 WASTE WATER TREATMENT EQUIPMENT
SAMSCO, No. 400-316,Water Evaporation System,Propane Gas Powered [23159]

0W1003 WELDERS, ARC
300 Amp, MILLER, Goldstar 300SS [22332]
350 Amp, MILLER, Syncrowave 350, 1992 [22325]
350 Amp, MILLER, Synchrowave 350, 1991 [22326]
350 Amp, MILLER, Synchrowave 350, 1992 [22327]
350 Amp, MILLER, Syncrowave 350LX, 1998 [22331]

0W1403 WELDERS, BUTT
Blade Welder, Grob RW-A, 1" Capacity [12144]

0W2103 WELDERS, GUN TYPE
100 KVA, [19934]

0W2287 WELDERS (Miscellaneous)
200 Amp Hobart, Gasoline Welder, Model G-213, Has Blown Engine, As-Is [16981]
METCO, No. 5, Thermospray Gun [21930]
METCO, No. 5P, Thermospray Gun [21929]
PANASONIC, Welding System [19749]

0W2480 WELDERS, PLASMA
METCO, Robotic Plasma Spray [20852]

0W2903 WELDERS, SEAM
PANDJIRIS, No. 72-F6-42, 78" Total Length Capacity, Miller Invision 456 [22474]

0W3054 WELDERS, SPOT
20 KVA Larkin, Spot Welder,rock-arm,22" throat,water cooled tip,440volts 60/1 [17019]
30 KVA, TAYLOR-WINDFIELD, [20019]
50 KVA, PEER, [20006]
50 KVA, PEER, [20746]
50 KVA, PEER, [21295]
50 KVA Thompson, Spotwelder, Rocker Arm [16277]
50 KVA, WESTERN ARCTRONICS,Rocker Arm,39" Long Arms,460 Volts,1 Phase [21823]
75 KVA. Taylor Windfield [20043]
100 KVA, BANNER, [19999]
100 KVA, JANDA, No. R2-100-24RTDF, 18" Thr., Rocker Arm, Technitron Cntrl, Clean [22039]
100 KVA, PEER, [20005]
100 KVA, TAYLOR-WINFIELD,Press type,440 volt,60/1 [19865]
WELD-O-MATIC,Unitek,1048B,500 Watts,115 volts 60/1 [20041]

0W3550 WELDERS, WIRE FEED
LINCOLN, [22523]
LINCOLN, [22524]
LINCOLN, [22525]
LINCOLN, [22526]
LINCOLN, [22527]
LINCOLN, [22528]
LINCOLN, [22529]
LINCOLN, [22530]
LINCOLN, [22531]
LINCOLN, [22532]
MILLER, [22535]

0W3752 WELDING POSITIONERS
300 Lb., ARONSON, No. AW300A, [21854]
1500 Lb., PANDJIRIS, No. 15-4AB, Pwr Tilt, V-Speed, 24" Square Table [22521]
1500 Lb., PANDJIRIS, No. 15-4AB, Pwr Tilt, V-Speed, 24" Square Table [22522]
3000 Lb., ARONSON, No. HD30CS, Vari-Speed Rotation, 36" Square Table, Rebuilt [22445]
6600 Lb., VANGUARD, No. HB-30, 54" Dia. Tbl., Pwr Tilt & Rotate, V-Speed, New [20693]
10000 Lb., RANSOME, No. 5T, 1977, [21880]
11000 Lb., VANGUARD, No. ZHB-50, 60" Dia. Tbl, Pwr Tilt & Rotate, V-Speed, New [20020]
11000 Lb., VANGUARD, No. HB-50, 60" Dia. Tbl, Pwr Tilt & Rotate, V-Speed, New [21172]

0W5210 WIRE MACHINERY, COILERS
No. VS, PERKINS, [21177]

0W6053 WIRE MACHINERY (Miscellaneous)
BRAIDER, SPIRKA,Model 24NG5-ACS [23228]
Wire Cradle: Artos Md.AE563, Pre-Feeder [14676]
WIRE REEL, SHUSTER, Universal [21965]

0W6454 WIRE MACHINERY, SPRING COILERS
No. 1ELE, SAMUEL, [22211]
No. 1ELE, SAMUEL, [22212]

0W6804 WIRE MACHINERY, STRAIGHTENERS & CUT-OFFS
3/16", LEWIS, No. 7D, 1/16"-3/16" Cap., Approx. 15' Of Runout, Cut-Off, Tooling [18371]

0W8304 WOODWORKING, GENERAL
CHAIN MORTISER, POWERMATIC, [19396]

0W8320 WOODWORKING, JOINTERS
6", YATES-AMERICAN, Wedge Bed, 50" Long, 3 Knife Head, 1/2 HP [17922]

0W8330 WOODWORKING, LATHES
OLIVER,Md. 51-A [21723]

0W8345 WOODWORKING, PLANERS
24", FAY & EGAN, No. 560, 1 Phase [22235]
PARKS, No. 20, 20" Wide x 6" Thick,4-Knife Cutter Head,Ex. Hood,3 HP. 60/3 [22256]
20", POWERMATIC, No. 221, Knife Sharpening Attachment [22710]
18" Rockwell/Delta, No. 22-200, 3-Knife Head, 6" Thickness Cap., 5 HP, Clean [19486]

0W8355 WOODWORKING, SAWS, BAND
36", NORTHFIELD, No. 36,14-3/4" Under Guide,App. 5 Hp. Motor [22492]

0W8855 SAWS, RIP, STRAIGHT LINE
DIEHL, No. SL 52,Var-Speed feed,2" Arbor,18" Blade, 20 Hp. Low Price [22324]

0W8860 SAWS, TABLE
DELTA, [23079]