MODEL: 57-900-000
SERIAL NUMBER: 376-080

CATALOG SPECIFICATIONS


*Grinds O.D.s and ends of standard end mills in one setup within just a few

minutes.

*Extremely versatile and is used for much more than just end mills. With the

Z-axis you get 8 different axes to work with for unlimited versatility.
*1 Machine grinds it all end mill, drills, roughing endmill, taps,

countersinks, carbide tools, radius end mills, lathe tool bits, various forms

tools, reamers, performs gashing and much more.
*The pneumatic finger instantly and automatically sets primary and secondary

clearance angles with the flip of switch.
*Dials zero out.
*Air bearing has a 360 degree swivel base for taper grinding.
*The Jet-Stream air bearing fixture is precision honed and capable of grinding

to close tolerances. The spindle sleeve is made from stainless steel and the

spindle itself is hard chromed steel.
*

*Takes standard 5C collets, with end mill holders available that can hold

shank sizes up to 2".
*Tables are cast 2" iron and precision ground.
*Motor/spindle assembly tilts to positive and negative angles, cutting tool

clearance angles can be adjusted as needed.
*Grinding chart provides clearance angles for all end mills from 3/16"-3".
Air bearing stroke: 10.5"
Air bearing swing over table: 9.8".
Cutting tool capacity: 2" shank, 9.8" O.D., 10.5" flute length
T-Slot dimension: .800 x .500 x .670
Table feed graduations: .001 or .02mm
X-Axis table travel: 6"
Y-Axis table travel: 3", plus motor sildes back & forth 6"
X-Axis table working space: 16.5" x 5.5"
Y-Axis travel working space: 13" x 5.5"
Wheel: 5" cup (or 6" dish with Z-axis), 1-1/4" arbor Motor tilt - +35/-8

degrees
Motor: 1/3 hp, 3450 RPM, 110 Volt
Net weight: 180 Lbs.
Machine dimensions, not including handles: 21" x 20" x 21"

F.O.B. Cincinnati, Ohio

SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER

C W Wood Machinery Inc
3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email (Request Quote): info@cwwood.com
Web: www.cwwood.com