MODEL: 225
SERIAL NUMBER: 2250129-F Year: 1996

GENERAL SPECIFICATIONS

Removes dirt, fines, abrasive particles, and other solid contaminants from a

variety of factory fluids including cutting oil, grinding coolant, gun

drilling oil, wire drawing oil, etc.

How it works: Contaminated liquid is pumped or gravity fed into the rotating

bowl through the hose inlet in the cover. While the liquid is in the bowl, it

is subjected to a force in excess of 1000 G's (gravities) which causes the the

heavy particles to be thrown out of suspension and collect within the bowl.

The sludge accumulates under an even higher centrifugal force which packs it

tight. This greatly reduces the volume occupied by the sludge before it is

spun. The clear liquid continuously flows over the rim at the top of the bowl

and is discharged through the outlet.

Bowl Diameter: 12"
Sludge Capacity: 40 Lbs. / 1 Gallon
-Can handle direct flow up to 30 GPM maximum.
Bowl Depth: 5"
Bowl Rim: 8-1/4"
Maximum Bowl Speed: 3450 RPM


EQUIPPED WITH

2 HP Motor
Removable Bowl

Approximate Weight: 160 Lbs.

SPECIAL NOTE: THIS UNIT IS SOLD WITHOUT THE BOWL.
A NEW BOWL IS AVAILABLE FROM BARRETT
THE COST IS APPROXIMATELY $1200.00.


F.O.B. Cincinnati, Ohio

SPECIFICATIONS SUBJECT TO SPECIFICATIONS

C W Wood Machinery Inc
3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email (Request Quote): info@cwwood.com
Web: www.cwwood.com