MODEL: 6250C-2000

Vanguard CA series engine lathes are constructed of high quality Meehanite

castings through out. All bedways are induction hardened and precision

ground on CNC way grinding machines. The spindles are forged steel and are

supported by precision NSK bearings. The Headstock features hardened and

ground steel gears lubricated by an automatic force lubrication system. The

gear box is totally enclosed, and is lubricated by an automatic forced

lubrication system.

The Vanguard CA series engine lathes are engineered and manufactured for

precision and maximum performance with standard features normally found as

options on higher priced machines.

Taper Attachment 3-Jaw Manual Chuck
2-Axis DRO 4-Jaw Manual Chuck
4-Way Rapid Traverse 5" & 10" Roller Steady Rests
Follow Rest Coolant System
Chuck Guard Chip Guard
Siemens Electrics Chip Pans

SPECIFICATIONS


Capacity
Swing Over Bed: 19.68"
Swing Over Cross Slide: 11.8"
Swing Over Gap: 28.35"
Gap Width: 8.62"
Distance Between Centers: 78.74"

Bed
Bed Way Width: 15-3/4"

Headstock
Spindle Nose: D1-8
Spindle Bore: 4"
Spindle Speeds: 10-1400
Number of Spindle Speeds: 24
Spindle Motor: 10 HP

Carriage
Cross-Slide Travel: 12.6"
Compound Travel: 5.5"

Threads & Feed Range
Longitudinal Feeds Number (in/rev): (64) .003-.06"
Metric Threads: (44) .04-7.56 mm
Inch Threads: (20) 2-24 TPI
Module Threads: (39) .01-1.89
Diametral Pitch Threads: (37) 1-96 D.P.
Leadscrew Diameter: 1.58"

Tailstock
Quill Diameter: 3"
Quill Travel: 6"
Quill Taper

Dimensions
L. x W. x H.: 144.4" x 40.8" x 51.7"
Machine Weight: 5,810 lbs.

STANDARD FEATURES
10" 3 Jaw Manual Chuck
15" 4-Jaw Independent Chuck
Face Plate
Follow Rest 4.92" Capacity
Roller Steady Rest 9.84" Capacity
Flood Coolant
Taper Attachment
2-Axis Digital Read-Out Installed
Live Center
Change Gears
Work Light
4 Position Turret
Foundation Pads & Bolts
Tool Box
Spare Parts

Warrany: One Year on Machine

LIMITED WARRANTY

Vanguard Machinery International, LLC (VMI,LLC) warrants to the original

purchaser other than a purchaser for resale. (the Purchaser) that VMI,LLC's

machine tools shall be free of defects in materials and workmanship for a

period of one (1) year from the completion of installation, or for a period of

fifteen (15)
months from date of shipment, whichever is earlier. VMI,LLC will, at its sole

and exclusive discretion, either replace or repair any machine or part thereof

defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by or authorized by a VMI,LLC

Authorized Service Organization to obtain warranty service. Purchaser must

contact their local VMI,LLC Authorized Service Organization. Purchaser must

provide verification of the date of delivery/installation when requesting

warranty service (dated installation report). Ground freight charges (UPS

regular or common carrier truck) for all warranty replacement parts are paid

by VMI,LLC. If machine is not operational, VMI,LLC will pay next-day air

shipment charges for necessary parts weighing 100 lbs. or less. Materials or

parts alleged to be defective shall be returned to VMI,LLC at VMI,LLC's

request, transportation charges prepaid. After the warranty repair or

replacement of a defective part, VMI,LLC's warranty for such part shall

continue for ninety (90) days or for the remainder of the original Limited

Warranty whichever is longer.

WARRANTY LIMITATIONS
This warranty shall remain in effect only if the machine is used and

maintained in accordance with all operating and maintenance instructions set

forth in the manuals and instruction sheets furnished by VMI,LLC. VMI,LLC

shall have no liability to repair or replace defective parts until the

Purchaser has fulfilled its payment obligations. No allowance will be made for

repairs or alterations made without VMI,LLC's written consent or approval. The

limited warranty provided by VMI,LLC excludes the following.

1. Damage, malfunction, or failure caused by or resulting from improper

maintenance, misuse, neglect, accident, or any other cause beyond the control

of VMI,LLC.
2. Damage. malfunction, or failure caused by modification of the machine

(mechanical or electrical) without written authorization by VMI,LLC.
3. Damage. malfunction, or failure caused by installation or use of

accessories or peripherals not purchased through or authorized in writing by

VMI,LLC.
4. Paint, batteries, filters, fluids, fuses, light bulbs, or any common

expendable item.
5. Damage to machines and/or components while being transported from VMI,LLC

warehouse or facility to destination.
6. Accessories or peripheral not manufactured by VMI,LLC which shall be

subject only to whatever warranty that is supplied by the manufacturer of such

product.
7. CNC control, spindle and servo motors, spindle and servo drives. Which are

covered by a two (2) year manufacturer warranty.

No person, agent, distributor, dealer or company is authorized to change,

modify, or amend the terms of this Limited Warranty in any manner. VMI,lLC

makes no warranties, guarantees or representations, express or implied with

respect to the machine tool, or parts thereof, except to the extent such

warranty is set forth here. The equipment covered does not necessarily comply

with any codes or standards unless specifically quoted, ordered, and so

accepted.

C W Wood Machinery Inc
3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email (Request Quote): info@cwwood.com
Web: www.cwwood.com