MODEL..................................DO 8514-20M

STANDARD FEATURES

Dual Operator Allows For Two Operators To Work At The Same Time
At Full Capacity
85 Ton Punch Station
Keyed Punch Ram For Safety
Punch Gauging Table With Fence and Scale
Die Holder Complete With 2" Die Insert

Punch Nut With Wrench
Adjustable Swing-Away Stripper

Punch Jog Control
Two Adjustable Electric Stroke Controls With Scale
Two Electric Remote Foot Pedals
Two 2-Stage Hydraulic Pumps
Two Valves
Built-In Rectangle Notcher: Can be converted to V-Notcher, Punch Station,
and Open-End Brake
Low Rake Angle Blade For Minimal Distortion
Shear Table With Scale and Miter Fence
Rod Shear
Slug Receptacles
Electrical Box Supplied With Emergency Palm Button and Lock-Out

Tag-Out Accomodations
230/460 Volt/3 Phase Electrics (Must Specify Voltage)
All Guards Necessary To Comply With ANSI B 11-5 Standards
Forklift Accomodations
One-Year Warranty
Made In USA

CAPACITIES AND SPECIFICATIONS: Rated On: A 36 Mild Steel/65,000 psi Tensile

Punching Capacity......................85 Ton
1-1/16" In 1"
Special Tooling........................4" Maximum Diameter
Throat Depth...........................14"
Flat Bar Shear, Saber Blade Standard...20" Length
1" x 16"
3/4" x 20"
Angle Shear, 90 Degrees................6" x 6" x 1/2"
45 Degrees................4" x 4" x 1/2"
Brake 12"*.............................85 Ton
Brake 24"*.............................85 Ton
Pipe Notcher, Schedule 40 I.D.*........3/4", 1", 1-1/4, 1-1/2", 2"






Rectangle Notcher......................2" x 4" x 1/2"
90 Degree V-Notcher (Notcher Station).3" x 3" x 1/2"
Punch Attachment For Notcher Station...50 Ton, 1-1/4" in 1/2"

Notching In Leg Of Channel.............6" x 10"
Channel Shear..........................2" to 6" Adjustable
Rod Shear

Round Rod.............................1/2", 3/4", 1", 1-1/2"
Square Rod............................1-1/2"
Square Tube Shear*.....................1/2" to 2", 14 Gauge
Picket Tool Housing*...................1/2", 3/4", 1"
Offset Die Holder......................Max. 40 Ton

Strokes Per Minute, Light Material.....48 SPM
Strokes Per Minute, Heavy Material.....20 SPM
Hydraulics.............................3200 PSI
Standard Motor.........................10 HP, 3 Phase 230/460/208//380/575 V
Optional Motor.........................10 HP, 1 Phase 230 V

*Optional Equipment Available

Dimensions.............................30"W x 60"L x 77"H
Approximate Weight.....................5400 Lbs.

F.O.B. Philip, South Dakota

FACTORY SPECIFICATIONS, SUBJECT TO CHANGE

C W Wood Machinery Inc
3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email (Request Quote): info@cwwood.com
Web: www.cwwood.com