MODEL: S1-262A


Vanguard is proud to introduce the Vanguard S1-262A "Oil Country" hollow

spindle lathe. This machine is designed to meet the demanding requirements of

today's "Oil Patch" industry.

The bed of the Vanguard S1-262A is constructed of high-grade alloyed cast iron

which is normalized and stress relieved to ensure rigidity and stability .The

lathe's extra wide bed casting is fully supported to the floor and features

replaceable steel ways hardened (HRc60) and precision ground.

The headstock of the Vanguard S1-262A features an impressive 14" spindle Bore

powered by hardened and precision ground gears. The machine comes standard

with front and rear mounted 31" 4-Jaw power scroll chucks. The S1-262A

features a wide range of inch, metric, module, and diametral thread pitches to

meet the needs of the dynamic energy industry.


CAPACITY

Swing Over Bed: 35"
Swing Over Cross Slide: 24"
Spindle Center To Floor: 45"
Distance Between Centers: 118"
Maximum Turning Length: 118"
Bed Width: 27-3/4"

HEADSTOCK

Spindle Speeds: (12) 7 to 305 RPM
Spindle Bore: 14"
Spindle Nose: A1-20
Spindle Motor: 25 HP

THREADS AND FEEDS

Threads Per Inch: (26) 1/2 to 28 TPI
Metric Threads: (22) 1 to 15 mm
Module Threads: (21) .5 to 7.5
Diametral Threads: (20) 2 to 28 TPI
Longitudinal Feeds: (32) ,003 to .56 IPR
Cross Feeds: (32) .003 to .56 IPR
Leadscrew Diameter-Pitch: 2.2" - 2 TPI
Longitudinal Rapid Travers: 157 IPM

COMPOUND

Compound Slide Swivel Angle: 90 Degrees
Cross Slide Travel: 12"
Compound Slide Travel: 8"
Cross Slide Width: 13"
Taper Attachment Taper Angle: 14 Degrees

EQUIPPED WITH

Replaceable Steel Ways
Front and Rear 31" 4-Jaw Power Scroll Chucks With 14-1/4" Bore
Taper Attachment
Flood Coolant
Chip Pans
4-Way Tool Post
Steady Rest: 13-3/4" Capacity
Live Center
Inch/Metric Dials
Three Position Micrometer Carriage Stop
Work Light
Top Jaws For Chucks

F.O.B. Houston, Texas

Approximate Weight: 25,000 Lbs.

SPECIFICATIONS SUBJECT TO CHANGE AND/OR MODIFICATION

Vanguard Machinery International, LLC
LIMITED WARRANTY

Vanguard Machinery International, LLC (VMI, LLC) warrants to the original

purchaser other than a purchaser for resale. (the Purchaser) that

VMI,LLC's machine tools shall be free of defects in materials and workmanship

for a period of one (1) year from the completion of installation, or for a

period of fifteen (15) months from date of shipment, whichever is earlier.
VMI,LLC will, at its sole and exclusive discretion, either replace or repair

any machine or part thereof defective in workmanship or material, ay no charge

to the Purchaser.

All warranty repairs must either be performed by or authorized by a VMI,LLC

Authorized Service Organization to obtain warranty service. Purchaser must

contact their local VMI,LLC Authorized Service Organization. Purchaser must

provide verification of the date of delivery/installation when requesting

warranty service (dated installation report). Ground freight charges (UPS

regular or common carrier truck) for all warranty replacement parts are paid

by VMI,LLC. If machine is not operational, VMI,LLC will pay next-day air

shipment charges for necessary parts weighing 100 lbs. or less. Materials or

parts alleged to be defective shall be returned to VMI,LLC at VMI,LLC's

request, transportation charges prepaid. After the warranty repair or

replacement of a defective part, VMI,LLC's warranty for such part shall

continue for ninety (90) days or for the remainder of the original Limited

Warranty whichever is longer.

WARRANTY LIMITATIONS

This warranty shall remain in effect only if the machine is used and

maintained in accordance with all operating and maintenance instructions set

forth in the manuals and instruction sheets furnished by VMI,LLC. VMI,LLC

shall have no liability to repair or replace defective parts until the

Purchaser has fulfilled its payment obligations. No allowance will be made for

repairs or alterations made without VMI,LLC's written consent or approval. The

limited warranty provided by VMI,LLC excludes the following.

1. Damage, malfunction, or failure caused by or resulting from improper

maintenance, misuse, neglect, accident, or any other cause beyond the
control of VMI, LLC.


2. Damage. malfunction, or failure caused by modification of the machine

(mechanical or electrical) without written authorization by VMI,LLC.
3. Damage. malfunction, or failure caused by installation or use of
accessories or peripherals not purchased through or authorized in
writing by VMI,LLC.

4. Paint, batteries, filters, fluids, fuses, light bulbs, or any common

expendable item.
5. Damage to machines and/or components while being transported from VMI,LLC

warehouse or facility to destination.
6. Accessories or peropheral not manufactured by VMI,LLC which shall be

subject only to whatever warranty that is supplied by the manufacturer
of such product.

7. CNC control, spindle and servo motors, spindle and servo drives. Which are

covered by a two(2) year manufacturer warranty.

No person, agent, distributor, dealer or company is authorized to change,

modify, or amend the terms of this Limited Warranty in any manner. VMI,LLC

makes no warranties, guarantees or representations, express or implied with

respect to the machine tool, or parts thereof, except to the extent such

warranty is set forth here. The equipment covered does not necessarily comply

with any codes or standards unless specifically quoted, ordered, and so

accepted.

C W Wood Machinery Inc
3290 Beekman St Cincinnati OH 45223-2423
Tel: 800-745-6008 Fax: 513-542-4819
Email (Request Quote): info@cwwood.com
Web: www.cwwood.com