Machinery International Corp            This graphic means item confirmed as in stock

20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email: sales@machyintl.com
Web: www.machyintl.com

0L6954 LEVELERS (ROLLER / PLATE & STRETCH)
4-1/2" (114mm) 4-HI ROLL LEVELER, 9 OVER 10 ROLL CONFIGURATION, 3/4 HP (12574) [12574]
7" (178mm) x 7/8" (22mm) KOHLER 19 ROLL LIGHT GAUGE STRIP LEVELER (12173) [12173]
7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER (12018) [12018]
8" x 0.060" LITTELL MDL 308-9PDS 9 ROLL STRAIGHTENER (13885) [13885]
8" X 0.062" LITTELL MDL 308-5PDL 5 ROLL STRAIGHTENER (13886) [13886]
8" x 0.062" LITTELL MODEL 308-5PDL 5 ROLL STRAIGHTENER (13887) [13887]
24" (622mm) x 3" (76mm), MCKAY, PLATE ROLLER LEVELER, 9 ROLL HEAVY DUTY (13625) [13625]
28" (711mm) x 0.135" (3.43mm), PRO ECO LEVELER (13744) [13744]
48" (1219mm) x .075" (2mm), HERR VOSS, 17 ROLLS, 40 HP DC MOTOR (13779) [13779]
84" (2,133mm) x 1/2" (12.7mm) PAXSON LEVELER (13994) [13994]
126" (3200mm) x 2" (50mm), SKET, UBR 40 X 3150, SPEED 9m/MIN. (7751) [7751]
126" (3200mm) x 2" (50mm), SKET, UBR 40 X 3150, SPEED 9m/MIN (7752) [7752]

0R6448 ROLLING MILLS, BAR & ROD
4" (101mm) x 8" (203mm) W., FIOA 2-HI ROD MILL, .325"- .040" MOD. SQUARE (12651) [12651]
5" (127mm) x 9" (228mm) W., STANDARD, 2-HI ROD MILL, (12945) [12945]
7" (177mm) x 2" (50mm) W. WATERBURY FARREL 10 STAND ROD MILL WITH COILER (11357) [11357]
220,000 TPY, WIRE ROD AND REBAR MILL (13747) [13747]
SIMAC SECTION ROLLING MILL 3 VERTICAL 3 HORIZONTAL STANDS (13731) [13731]
MORGARDSHAMMER CROSS COUNTRY ROD MILL INSTALLATION (14010) [14010]
STANDARD, 6 STAND TANDEM WIRE ROD .425"-.110" (10mm-2mm) Cap., 3 GROOOVE (12637) [12637]
SUMITOMO, 32 STAND ROD MILL FOR STAINLESS 5.5mm-1.2mm (.216"- .048") (13357) [13357]
HOT ROLLING MILL PLANT FOR ROUND BAR (12311) [12311]

0R6697 ROLLING MILLS, CLUSTER
6 5/16"(160mm) x 13"(330mm) x 20 7/8" (530mm), SCHMITZ, 6 HI CLUSTER (13521) [13521]
8 21/32"(220mm) x 16"(400mm) x 22 13/16"(580mm), RWF, 6 HI CLUSTER (13522) [13522]

0R7003 ROLLING MILLS, SENDZIMIR
8" (200mm), SUNDWIG, 12 HIGH, 0.080"-0.002" (2 - 0.05mm) (13672) [13672]
8 1/2" (216mm) WATERBURY FARREL ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610) [1610]
8-1/2" (216mm) WATERBURY FARREL ZR16-8 1/2, 30HP DRIVE, 15HP RECOILERS (10018) [10018]
10" (250mm) SUNDWIG 12-HI COLD REVERSING, COPPER ALLOYS (13487) [13487]
13", WATERBURY FARREL, No. ZR33-13, (13920) [13920]
25" (635mm) SENDZIMIR ZR19-25, 12-HI COLD REVERSING MILL, STAINLESS (13051) [13051]
26" (660mm) WATERBURY FARREL ZR22B-26, 20-HI SENDZIMIR REVERSING (13352) [13352]
31" (787.4mm), WATERBURY FARREL ZR23-31 SENDZIMIR MILL (13727) [13727]
39" (1000mm) DEMAG SENDZIMIR, THICKNESS 0.078" (2mm) - 0.0037" (0.095mm) (13477) [13477]
40" (1020mm), SENDZIMIR, ZR23-43, SINGLE STAND, 20-HI COLD REVERSING (13764) [13764]
49" (1244mm) INNOCENTI ZR22-49 SENDZIMIR 20-HI COLD ROLLING MILL (11470) [11470]
52" (1321mm) DMS ZR22-BBS-52, 20-HI SENDZIMIR MILL (13334) [13334]

0R7045 ROLLING MILLS, 2-HI
1"(25.4mm) x 2"(50.8mm) BUHLER EW 100 2 HIGH ROLLING MILL (13899) [13899]
3" (76mm) x 5" (127mm) CAVALLIN, 2-HI ROLLING MILL, 220V AC (12976) [12976]
4" (101mm) x 6" (152mm), IRM, 2 HIGH REVERSING ROLLING MILL (13437) [13437]
5" (127mm) x 8" (203mm), STANDARD, 2-HI ROLLING MILL (12653) [12653]
5 1/2" (140mm) x 6" (152mm) MARSHALL RICHARDS, 10 HP DC, WINDERS (11983) [11983]
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684) [13684]
8" (204mm) x 8" (204mm) FENN, 20 HP DC, 500 VOLTS (13364) [13364]
8" x 8", STANDARD 2 HI, 10 HP, Handwheel Screwdown, Strip or Flat Wire (14021 [14021]
8"(203mm) x 10"(254mm), RUESCH, 2 HIGH HANDWHEEL SCREWDOWN 25 HP (13952) [13952]
9" (228) x 12" (305mm), FENN 2 HI, 50 HP, CLADDING MILL (13983) [13983]
12" (305mm) x 12" (305mm) CANADIAN IRON, HAND WHEEL ADJUSMENT, 50 HP AC (13225) [13225]
12"(305mm) x 14"(350mm) CARL WEZEL, PRECISION, AGC, HYD. SCRWDN, VOLLMER (4228) [4228]
12" (305mm) x 26" (660mm), MEMCO, EMBOSSING MILL (13514) [13514]
12" (305mm) x 26" (660mm), MEMCO, EMBOSSING MILL (13515) [13515]
14" (355mm) x 16" (406mm), RWF, SKIN PASS MILL, HYD SCREWDOWN, NON REV, (14020) [14020]
16" (419mm) x 18" (457mm), I2S, 2 HIGH, HYD SCREWDOWNS, 14.5" STRIP (13873) [13873]
16" (400mm) x 24" (600mm) GRISET 2-HI COLD BREAKDOWN MILL, 220 HP (13402) [13402]
18" x 34", SUNDWIG, 145 kw, 2 HIGH, POWERED SCREWDOWNS (13959) [13959]
18" (457mm) x 65" (1650mm), WEAN UNITED, 2-HI REV, 50 HP, 230 VAC (13104) [13104]
22" (558mm) x 33" (838mm), 2-HI TEMPER PASS MILL (13353) [13353]
22" (558mm) x 40" (1016mm), LEWIS, 2 HI NON REVERSING, 200 HP, 600 FPM (13185) [13185]
25"(635mm) x 42"(1066mm) WATERBURY FARREL NON-REV, STAINLESS 37"(939mm)W (13129) [13129]
32" (812mm) x 84" (2134mm), BLISS TEMPER MILL, REBUILT 2005, AGC, (13714) [13714]

0R7097 ROLLING MILLS, 2-HI, TANDEM
12" (304mm) x 8" (203mm) STRILICH, 3 STAND, 15 HP PER STAND (12413) [12413]

0R7240 ROLLING MILLS, 2/4-HI
1 1/2" (38mm) x 5" (127mm) x 8" (203mm) FENN REVERSING, 10 HP AC (12649) [12649]
1.625" (42mm) X 5" (127mm) X 7 1/2" (191mm), FENN, NON REVERSING (13681) [13681]
3 1/2"(88.9mm) x 11" (280mm) x 14" (356mm), BHS-TORIN, 2/4 HI (13795) [13795]
5" x 8", N FERRARA, 2/4 HI ROLLING MILL (14041) [14041]

0R7604 ROLLING MILLS, 4-HI
13/16"(20.7mm) x 4"(101mm) x 2"(50mm) BHS-TORIN 2/4 HI, HYD SCREWDOWN (13989) [13989]
1-7/8"(47mm) x 8"(203mm) x 8" FENN, DUAL HANDWHEEL SCREWDOWN, REC/PAYOFF (6433) [6433]
2"(50.8mm) x 10"(254mm) x 14"(356mm), WATERBURY FARREL, NON REV MILL (13693) [13693]
2 1/2" (63mm) x 8" (203mm) x 8" (203mm) WATERBURY FARREL, NON REVERSING (13588) [13588]
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332) [13332]
3" (976.2mm) x 10.5" (267mm) x 10.5" (267mm) RUESCH 4 HIGH ROLLING MILL (13682) [13682]
4" x 14" x 20", RUESCH, 4 HI REV, MILL HP 300, RCLR 150 HP (13921) [13921]
4" x 14" x 20" RUESCH 4 HI REV, 150 HP MILL, 100HP RCLR (13922) [13922]
5" (127mm) x 10" (254mm) x 10" STANAT NON REVERSING BONDING MILL 25HP DC (10647) [10647]
5" x 16" x 16", RUESCH, 4 HIGH REVERSING ROLLING MILL (14042) [14042]
5" (127mm) x 17" (430mm) x 15 3/4" (400mm) SCHMITZ 4-HI REVERSING, AGC (13434) [13434]
6-5/8" (170mm) x 16" (400mm) x 13-3/4" (350mm) SCHMITZ 4-HI ROLLING MILL (12980) [12980]
7"(180mm) x 20"(510mm) x 20 1/2"(520mm), KOBE, REV HYD SCREWDOWN (13553) [13553]
9" x 28" x 30", BLISS, 4 HIGH ROLLING MILL, 450kw MAIN MOTOR (13960) [13960]
10"(250mm) x 20" (500mm) x 20" (500mm) 4 HIGH ROLLING MILL (13893) [13893]
15" (380mm) x 36" (915mm) x 59" (1500mm) ALUMINUM 4-HI NON-REV MILL (13441) [13441]
20" (508mm) x 50" (1270mm) x 56" (1422mm) UNITED 4-HI REVERSING MILL (12174) [12174]

0R7650 ROLLING MILLS, 4-HI, TANDEM
5" (130mm) x 15" (390mm) x 13" (340mm), FROHLING, 4 STAND 4-HI COLD (13026) [13026]

0S7748 STRAIGHTENERS, FLAT & SHAPE
4" (100mm) x 1" (25mm), MEDART, MODEL TPVC12-2, SHAPE STRAIGHTENER (13280) [13280]