MACHINE # 13129
          
          MANUFACTURER:  WATERBURY FARREL
          
          SPECIFICATIONS
          MILL SECTION: 2 HI
          MILL TYPE: NON REVERSING 
          MATERIAL: STAINLESS STEEL, CARBON STEEL
          
          STRIP WIDTH DATA
          MAXIMUM: 37IN/939.802MM
          MINIMUM: 14IN/355.601MM
          ENTRY GAUGE MAXIMUM: 0.125IN/3.175MM
          EXIT GAUGE MINIMUM: 0.008IN/0.203MM
          MAXIMUM COIL SIZE (WINDER) O.D.: 48IN/1219.202MM
          COIL SIZE (WINDER) I.D.: 20IN/508.001MM
          MAXIMUM COIL WEIGHT: 
          ABSOLUTE COIL WEIGHT: 14,200LBS/6441.077747KG
          
          MILL DATA/
          MILL SPEED (MAX): 500FPM/152.40MPM
          MILL SPEED (MIN): 250FPM/76.20MPM
          MILL POWER, MAIN MOTOR: 250HP/186.424968KW
          650/1300 RPM, WATER COOLED, EDDY CURRENT CLUTCH
          44O VOLT, 3PH, 60 CYC
          PINION STAND RATIO16.8 : 12 SPEED
          
          MILL ROLLS
          WORK ROLL NOMINAL DIAMETER: 25IN/635.00127MM
          BACK UP ROLL DIAMETER42IN/1066.802134MM
          MILL BEARINGS , ROLLER TYPE/
          
          WINDERS
          WINDER POWER: 150HP/111.8549808KW
          WATER COOLED, EDDY CURRENT CLUTCH
          440 VOLT, 3 PH, 60 CYC
          
          WINDER MANDREL: 
          DIAMETER: 20IN/508.001016MM
          FACE: 42IN/1066.802134MM
          MANDREL TYPE: EXPANDABLE, 19.687" CLOSED
          
          WINDER TENSION: 
          MAXIMUM: 15,000LBS/6803.955366KG
          INTERMEDIATE TO 650 FPM: LBS/0KG
          MINIMUM: 9,900LBS/4490.610542KG
          GEAR REDUCER RATIO15.22 : 1
          
          PAYOFF
          POWER: 3HP, AC/2.237099616KW
          TENSION: 8,332LBS/3779.370407KG
          SPEED: 500FPM
          MANDREL DIAMETER: 17.5IN/444.5MM
          NOMINAL: 21.521.5IN/546.1MM
          (WITH FILLERS): 25.0IN/635.0MM
          WATER COOLED BRAKE, MANUAL EDGE CONTROL
          
          COOLANT -FILTER SYSTEM: 
          MILL DIRECTION: RIGHT TO LEFT
          
          LINE CONFIGURATION
          COIL CAR: FIXED, HYDRAULIC LIFT
          PAYOFF REEL: PAPER WINDER
          ENTRY BRIDGE TABLE: HYDRAULIC OPERATION
          SENSING HEADS
          DEFLECTOR ROLL: 
          MAIN MILL FRAME: (2) 20" DIA HYDRAULIC CYLINDER LOAD/ADJUSTMENT
          ROLL POLISHING TOP AND BOTTOM
          ROLL CHANGE SLED
          DEFLECTOR ROLLPIVOTING FOR LOAD CELL
          WINDER (LEFT): 
          COIL CAR: HYDRAULIC LIFT
          PAPER WINDER
          MOTOR DRIVE CONTROLS: 
          OPERATOR CONTROL CONSOLE
          OVERALL FLOOR DIMENSIONS, (L-R / F-B): 26 FT X 33 FT
          
          MILL IS DISMANTLED AND LYING IN STORAGE
          
          **TEMPORARY SPECIFICATIONS SUBJECT TO REVISIONS**
          
          **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
          **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com