MACHINE# 13352
          
          MANUFACTURER:         WATERBURY FARREL CO USA
          
          1. TECHNICAL SPECIFICATIONS:
          NEW DC MOTOR THYRISTOR PANEL (1750HP DC MOTOR THYRISTOR PANEL, 900HP DC MOTOR
          
          THYRISTOR PANEL x 2 SET)
          NEW PLC & HMI CONTROL SYSTEM
          NEW ROLLING OIL FILTERING SYSTEM
          NEW MILL PINION REDUCER
          NEW FUME COLLECTOR
          MATERIAL : STAINLESS STEEL 300, 400
          THICKNESS MAXIMUM : 4.0mm (0.157"), MINIMUM : 0.1mm (.004")
          MILL SPEED MAXIMUM : 460M/MIN. (1510 FPM) (PERFORM 180M/MIN. (590 FPM))
          WINDER : COLLAPSE DIA. 450mm (17.7"), EXPAND DIA. 558.8mm (22")
          STRIP WIDTH : 330mm (13") MINIMUM, 660mm (26") MAXIMUM
          COIL SIZE :
          - I.D. DIA. 500mm/558.8mm (19.6"/22")
          - O.D. DIA. 1,448mm/1,512mm (57"/59 1/2")
          COIL WEIGHT : 7,500 KG (16,534 LBS.)
          TENSION : 9 TON
          THICKNESS CONTROL : GAUGE CONTROL AM241 GAMMA RAY
          - WORK ROLL : 66.7mm (2 5/8") DIA., 749mm (29 1/2") TL
          - 1ST INTERMEDIATE ROLL : 107mm (4.125") DIA, 995mm (39 3/16") TL
          - 2ND INTERMEDIATE ROLL : 427mm (6 13/16") DIA, 698mm (27 1/2") BL, 36 1/8" TL
          - BACK UP ROLL : BRG O.D. 300mm (11.811"), OUT RACE 173mm (6.797"), BRG SHAFT
          
          O.D. 130mm (5.116"), BRG SHAFT RACE 892mm (35 1/8") TL
          
          2. MILL LUBRICATION:  MINERAL OIL, LUBE RATE 1,750 LPM
          ROLLING OIL FILTERING SYSTEM: MINERAL OIL, SUPAMIC FILTER TANK 910 LPM x 3 SET
          
          3. MILL DC MOTOR: 1750HP 450/850RPM 600VDC/2300A EXC 250VDC/15.2 AMP
          
          4. TENSION REEL DC MOTORS
          RIGHT REEL: 600HP 400/1200RPM 400VDC/1245A EXC 250VDC/11AMPS
                    : 300HP 400/1200RPM 200VDC/1285A EXC 250VDC/9.2AMPS
           LEFT REEL: 600HP 400/1200RPM 400VDC/1245A EXC 250VDC/11AMPS
                    : 300HP 400/1200RPM 200VDC/1285A EXC 250VDC/9.2AMPS
          
          5. PAY OFF REEL DC MOTOR: 40HP 1725RPM 230VDC/147AMPS
          
          6. SUBSTATION
          TRANSFORMER 2.4KV/535V 1,000KVA x 3 SET
          VCB PANEL x 6 SET
          MILL MOTOR DC REACTOR x 2 SET
          
          7. THYRISTOR PANEL
          MILL DC MOTOR: EUROTHERM 590P/1700/690 x 2 UNIT
          RIGHT REEL : EUROTHERM 590P/1200/690 x 1 UNIT
          LEFT REEL : EUROTHERM 590P/1200/690 x 1 UNIT
          
          8. OPERATION PANEL: IN SIEMENS PLC & I2 GAMMA RAY COMPUTER
          
          9. MOTOR CONTROL CENTER PANEL
          PAY OFF REEL DC MOTOR CONTROL UNIT: EUROTHERM 590P/0180/500
          AUX HYDRAULIC PUMP MOTOR: 25KW AC440V 1170RPM
          BOOSTER HYDRAULIC PUMP MOTOR: 7.5KW AC440V 1160RPM
          SIDE ECCENTRIC DRIVE MOTOR: 0.5KW AC440V 1085RPM x 2 SET
          MILL LUBRICATION SUPPLY PUMP MOTOR: 100KW AC440V 1750RPM x 2 SET
          CROWN HYDRAULIC PUMP MOTOR: 15KW AC440V 1750RPM
          AGC HYDRAULIC PUMP MOTOR: 15KW AC440V 1180RPM
          ENTRY FEEDER MOTOR: 7.5KW AC440V 1740RPM
          GEAR LUBRICATION PUMP MOTOR: 5KW AC440V 1150RPM x 2 SET
          DC MOTOR ROOM COOLING FAN MOTOR: 40KW AC440V 885RPM
          MILL HOUSING FUME COLLECTOR MOTOR: 37KW AC440V 1774RPM
          MILL ROLL LATERAL ADJUST MOTOR: 0.25KW AC440V 1425RPM x 2 SET
          
          10.ROLLING OIL SUPAMIC FILTERING SYSTEM CONTROL PANEL
          PRIMARY PUMP: 15KW AC440V x 3 SET
          SECONDARY PUMP: 3.7KW AC440V x 3 SET
          TRANSFER PUMP: 3.7KW AC440V x 2 SET
          DRAIN PUMP: 1.5KW AC440V x 2 SET
          DISPOSAL PUMP: 0.75KW AC440V x 2 SET
          SLUDGE PUMP: 1.5KW AC440V x 1 SET
          
          11.SPARE PARTS
          ROTARY CYLINDER PISTON DIA. 635 x L 145 x 2 Ea.
          ROTARY CYLINDER SHAFT DIA. 138 x L 3175 x 1 Ea.
          ROTARY CYLINDER S/C BUSH DIA. 184 x L 135 x 1 Ea.
          ROTARY CYLINDER S/C BUSH DIA. 172 x L 125 x 1 Ea.
          SEGMENT STOPPER DIA. 300 x L 175 x 2 Ea.
          MILL SPINDLE SHAFT DIA. 170 x L 1250 x 4 Ea.
          SPINDLE GEAR COUPLING DIA. 200 x L 170 x 8 Ea.
          SPINDLE JOW COUPLING DIA. 170 x L 170 x 8 Ea.
          SIDE ECCENTRIC GEAR DIA. 300 x L 100 x 2 Ea.
          BACK-UP ROLL SHAFT GEAR DIA. 215 x L 70 x 6 Ea.
          DRIVE ROLL COUPLING DIA. 165 x L 80 x 3 Ea.
          SEGMENT BLOCK 380 B x 115 H x L 815 x 1 Ea.
          HYDRAULIC PUMP VICKERS-45V-50 x 1 Ea.
          WORK ROLLS :
           SZ- 11 DIA. 56~DIA. 67 x 749.3mm x 269 Ea.
           SZ- 12 DIA. 56~DIA. 67 x 749.3mm x 29 Ea.
          1ST ROLLS PSTR-12 DIA. 95~DIA. 98mm x 815.98mm x 67 Ea.
          2ND ROLLS AISI-D2 DIA. 172mm x 855.66mm x 16 Ea.
          2ND ROLLS AISI-D2 DIA. 172mm x 892.00mm x 13 Ea.
          BACK UP BEARING DIA. 300mm x 172.6mm x 24 Ea.
          BACK UP BEARING SHAFT DIA. 130mm x 892.17mm x 21 Ea.
          COIL CAR CRADLE ROLLS DIA. 220 x 415mm x 2 Ea.
          
           ** Temporary Specifications Subject to Revisions **
          
           ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **
          
           ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com