24" METLSAW Non-Ferrous Programmable Circular Saw, AB PanelView, 30 HP
- Manufacturer
- METLSAW
- Model
- CS2-T12
- Year
- 2012
- Condition
- Used
Description
24" METLSAW Non-Ferrous Programmable Circular Saw, AB PanelView, 30 HP AGE: 2012 MODEL NUMBER: CS2-T12 SPECIFICATIONS: Cuts Solids, Extrusions, Tubes or Rounds Material Width, Max.: 24" Material Thickness, Max.: 8" to 14" Programmable Backgauge Range: 12' Backgauge Speed: 0 to 500 IPM Backgauge Reverse Speed: 0 to 800 IPM Saw Blade Diameter: 28" Cutting Speeds, Aluminum: Up to 500 Sq. In./Min. Carriage Feed: 0 to 500 IPM Air Requirements: 30 CFM @ 80 PSI EQUIPPED WITH: Automatic Fast Forward Blade Travel Universal Clamping for Single or Bundle Cutting Variable Cutting Speed According to Type and Thickness of Material Servo Controlled Carriage Drive Provides Smooth, Finely Controlled Cutting Speeds Variable Cutting Lengths Allows Very Small Pieces to be Cut as Efficiently as Large Pieces CRT Display Shows Actual Position of Backgauge at all times Automatic Proportional Speed Control, Automatically Adjusts Carriage Traverse Speed to Thickness of Material Allen Bradley PanelView 1000 Programmable Controller Programmable Precision Backgauge Automatically Feeds to 12' Maximum Chip Collector System MOTOR DATA: 30 HP, 480/3, 80 Amps
Specifications
| Air Pressure (kPa) | 551.58 |
|---|---|
| Air Requirements Cfm | 30 |
| Amperage (a) | 80 |
| Backgauge Reverse Speed Max Mm Per (min) | 406,400 |
| Backgauge Speed Max Mm Per (min) | 254,000 |
| Carriage Feed Max Mm Per (min) | 254,000 |
| Cutting Speed Aluminum Sq In Per (min) | 500 |
| Material Thickness Max (mm) | 355.6 |
| Material Type | non_ferrous |
| Material Width Max (mm) | 609.6 |
| Phase | 3 |
| Power Output (kW) | 22.371 |
| Programmable Backgauge Range (m) | 3.658 |
| Saw Blade Diameter (mm) | 711.2 |
| Voltage (v) | 480 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Sawing
17.71" KALTENBACH CNC Circular Saw, 5.9" Rd, 5.5" Sq, 23 to 141 SFM Cutting
Kaltenbach · KKS 401 NA
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
11.2" AMADA Fully Automatic Carbide Circular Saw, 2.95" Rds, 20' Magazine, 10 HP
AMADA · CM75 · 2005
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
DAKE MODEL #COBRA 350AX SAW
Dake · Cobra 350AX
National Machinery Exchange
TOP, 18" blade, 7.5 HP, 20-1/2" rip, bevel, miter
TOP
A M Metalmaq
