11.2" AMADA Fully Automatic Carbide Circular Saw, 2.95" Rds, 20' Magazine, 10 HP
- Manufacturer
- AMADA
- Model
- CM75
- Year
- 2005
- Condition
- Used
Description
11.2" AMADA Fully Automatic Carbide Circular Saw, 2.95" Rds, 20' Magazine, 10 HP AGE: 2005 MODEL NUMBER: CM75 SPECIFICATIONS: Cutting Capacity, Round Solid @ 90 Deg.: 0.4" to 2.95" Cutting Capacity, Flat and Profile @ 90 Deg.: 0.4" x 0.4" to 2.16" x 2.16" Saw Blade: 11.2" x 1.57" x 0.08" Automatic Feed Length, One Stroke: 28.15" Shortest Cut-Off Length, Automatic: 0.4" Cutting Speeds, Inverter Drive: 56 to 255 RPM No. of Speeds: Infinite EQUIPPED WITH: Powered Head Feed Slide-Type Way Hydraulic Vise Mist Coolant Controlled Mist System Wire Blade Chip Brush PLC Control Anti-Backlash Device Cut Piece Counter Ammeter for Main Motor Amp Draw Self-Diagnostics Chip Conveyor Sorting Chute to Separate Trim and Remnants from Good, Cut Pieces Automatic Trim Cut Carbide Stabilizer Pads 20' Incline Table MOTOR DATA: 10 HP Saw 3 HP Hydraulic 220/3 Voltage 90 PSI Air OVERALL DIMENSIONS: 80" x 67" x 62" (Saw Only) WEIGHT: 5,512 Lbs.
Specifications
| Air Pressure (kPa) | 620.526 |
|---|---|
| Air Pressure (psi) | 90 |
| Automatic Feed Length One Stroke Inches | 28.15 |
| Blade Diameter Inches | 11.2 |
| Blade Thickness Inches | 0.08 |
| Blade Width Inches | 1.57 |
| Control Type | plc |
| Coolant System | mist_coolant |
| Cutting Capacity Flat Profile Max Inches | 2.16 |
| Cutting Capacity Flat Profile Min Inches | 0.4 |
| Cutting Capacity Round Solid Max Inches | 2.95 |
| Cutting Capacity Round Solid Min Inches | 0.4 |
| Cutting Speed Max (RPM) | 255 |
| Cutting Speed Min (RPM) | 56 |
| Feed Type | powered_head_feed |
| Hydraulic Motor Power (hp) | 3 |
| Hydraulic Motor Power (kW) | 2.237 |
| Magazine Length Feet | 20 |
| Main Motor Power (hp) | 10 |
| Main Motor Power (kW) | 7.457 |
| Number Of Speeds | infinite |
| Overall Height Inches | 62 |
| Overall Length Inches | 80 |
| Overall Width Inches | 67 |
| Phase | 3 |
| Shortest Cutoff Length Automatic Inches | 0.4 |
| Vise Type | hydraulic |
| Voltage (v) | 220 |
| Way Type | slide_type |
| Weight (kg) | 2,499.269 |
| Weight (lbs) | 5,512 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Sawing
17.71" KALTENBACH CNC Circular Saw, 5.9" Rd, 5.5" Sq, 23 to 141 SFM Cutting
Kaltenbach · KKS 401 NA
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
24" METLSAW Non-Ferrous Programmable Circular Saw, AB PanelView, 30 HP
METLSAW · CS2-T12 · 2012
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
DAKE MODEL #COBRA 350AX SAW
Dake · Cobra 350AX
National Machinery Exchange
TOP, 18" blade, 7.5 HP, 20-1/2" rip, bevel, miter
TOP
A M Metalmaq
