17.71" KALTENBACH CNC Circular Saw, 5.9" Rd, 5.5" Sq, 23 to 141 SFM Cutting
- Manufacturer
- Kaltenbach
- Model
- KKS 401 NA
- Condition
- Used
Description
17.71" KALTENBACH CNC Circular Saw, 5.9" Rd, 5.5" Sq, 23 to 141 SFM Cutting MODEL NUMBER: KKS 401 NA SPECIFICATIONS: Saw Blade: 17.71" Round: 5.9" @ 90 Deg. Square: 5.5" @ 90 Deg. Flat: 9.4" x 3.1" @ 90 Deg. 7.6" x 2.3" @ 45 Deg. Channels, Horizontal: 9.4" x 3.3" @ 90 Deg. 7.0" x 2.7" @ 45 Deg. Channels, Vertical: 4.7" x 2.1" @ 45 Deg. Material Height, Min.: 0.2" Cutting Speeds: 23 to 141 SFM Saw Blade Feed, Infinitely Variable: 0 to 1200mm/Min. Fast Return Stroke: 3500mm/Min. Material Feed: Cut-Off Length: 0.4" to 400" Feeding Speed: 50 or 100 FPM Return Feed of Gripper: 120 FPM Turntable Rotation: 120 Deg. Total, +/- 60 Deg. (Right of Left of Straight) EQUIPPED WITH: Hydraulic Saw Blade Feed Work Lamp Material Feed Gripper Hydraulically Retractable Trim-Cut Device Installed In The Feed Unit Pin Chip Wheel CNC Control w/Heavy Duty PC & TFT Flat Monitor In Touch-Screen Design With Floppy and CD Drives, Modem for Tele-Diagnostics, Proficut Software Package With 99 Programs With 10,000 Sets Storage MOTOR DATA: 5.4 HP Saw 2.4 HP Hydraulic 0.13 HP Coolant Pump CONDITION: Will Be Setup and Tested Under Power
Specifications
| Control Type | CNC |
|---|---|
| Coolant Pump Power (kW) | 0.097 |
| Cutoff Length Max (mm) | 10,160 |
| Cutoff Length Min (mm) | 10.16 |
| Cutting Speed Range Sfm | 23 to 141 |
| Drive Type | hydraulic |
| Fast Return Stroke (mm/min) | 3,500 |
| Gripper Return Feed Fpm | 120 |
| Hydraulic Motor Power (kW) | 1.79 |
| Material Feed Speed Option 1 Fpm | 50 |
| Material Feed Speed Option 2 Fpm | 100 |
| Max Flat Capacity Height (mm) | 78.74 |
| Max Flat Capacity (mm) | 238.76 |
| Max Round Capacity (mm) | 149.86 |
| Max Square Capacity (mm) | 139.7 |
| Saw Blade Diameter (mm) | 450.086 |
| Saw Blade Feed Max (mm/min) | 1,200 |
| Saw Motor Power (kW) | 4.027 |
| Turntable Rotation Each Side Degrees | 60 |
| Turntable Rotation Total Degrees | 120 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Sawing
11.2" AMADA Fully Automatic Carbide Circular Saw, 2.95" Rds, 20' Magazine, 10 HP
AMADA · CM75 · 2005
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
24" METLSAW Non-Ferrous Programmable Circular Saw, AB PanelView, 30 HP
METLSAW · CS2-T12 · 2012
Bass Machinery
14" Blade TSUNE Fully Auto Non-Ferrous Circular Saw, 3.5" Rd, 2.75" Sq, 20' Load
TSUNE · TK5M-90PL · 2002
Bass Machinery
DAKE MODEL #COBRA 350AX SAW
Dake · Cobra 350AX
National Machinery Exchange
TOP, 18" blade, 7.5 HP, 20-1/2" rip, bevel, miter
TOP
A M Metalmaq
