Coil Processing·Slitting Line

48" x 6" x 20,000 Lb YODER Loop Slitting Line

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: Yoder
Condition: Used

Description

48" x 6" x 20,000 Lb YODER Loop Slitting Line SPECIFICATIONS: Thickness: .008" to .125" Coil Capacity: 20,000 Lbs. Coil I.D., Entry and Exit: 16" Previously Used for Light Gauge Tin Plate CONSISTING OF: Yoder / Braner Coil Tipper / Coil Car: Self-Contained Hydraulics Coil Car Goes Up, Down, In, Out and Tips Coils from Skidded, Eye-to-Sky to Horizontal Yoder Uncoiler: Hydraulic Expansion: 15-1/2" to 20" Hydraulic Sliding Base Water Cooled Brake Hydraulic Forward / Reverse Yoder Edge Control Yoder Slitter: Arbors: 6.000" 10 HP Electric Feed-Up Drive Eddy Current Helper Drive Pinch Rolls Edge Guides Custom Tension Stand: Pneumatic Drag Wipe Type Overarm Paper Stuffer 20,000 Lb. Yoder Recoiler: I.D.: 16" 50 HP Eddy Current Drive, New 2015 2-Speed Gear Box 17.7:1 and 35.5:1 Hydraulic Push-Off Mechanical Gripping and Expansion Hydraulic Controlled Overarm 1,500 Lb. Yoder Scrap Winder: Self-Contained Hydraulic Yoder 2-Arm Storage Turnstile: Hydraulic Push-Off All Electrics are 575 Volt, 3 Phase Transformers Included to Run on 460 Volts CONDITION: Came from a Manufacturing Plant, Well Maintained, Used Very Little, Used Almost Exclusively on Light Gauge Tinplate Entire Line was Stripped to Bare Metal, Primed and Painted, Looks Like New All Electric Controls and Panels have been Rewired

Specifications

Application	light gauge tinplate
Arbor Diameter (mm)	152.4
Coil Capacity (kg)	9,071.85
Coil Id Entry Exit (mm)	406.4
Coil Width (mm)	1,219.2
Feed Drive Power (kW)	7.457
Material Thickness Max (mm)	3.175
Material Thickness Min (mm)	0.203
Phase	3
Recoiler Capacity (kg)	9,071.85
Recoiler Drive Power (kW)	37.285
Recoiler Gear Ratio 1	17.7
Recoiler Gear Ratio 2	35.5
Recoiler Id (mm)	406.4
Scrap Winder Capacity (kg)	680.388
Uncoiler Expansion Max (mm)	508
Uncoiler Expansion Min (mm)	393.7
Voltage (v)	575