Coil Processing·Slitting Line

74" x 10.5" x 70,000 Lbs PRO-ECO Slitting Line

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: PRO-ECO
Model: 7400105070
Condition: Used

Description

74" x 10.5" x 70,000 Lbs PRO-ECO Slitting Line AGE: N/A SPECIFICATIONS: Material Type: Hot Rolled, Including High Strength G80 Max. Shear Strength: 80,000 PSI Incoming Coil Width: 20" Min., 72" Max. Max. Nominal Coil Width - Entry: 74" Coil Weight, Entry & Exit: 70,000 Lbs. Thickness Range: .062" to .625" Min. Coil OD, Exit: 30" Max. Coil OD, Exit: 24" (at Recoiler) Coil ID, Entry: 18" to 33" Coil ID, Exit: 24" (at Recoiler) Max. Line Speed, Low Gear: 0 to 150 FPM Max. Line Speed, High Gear: 0 to 400 FPM Threading Speed: 15 to 100 FPM Slitting Capacity, 80,000 PSI Shear Strength w/10.5" Arbor, Low Gear: 3 Cuts of .625" 5 Cuts of .500" 11 Cuts of .250" Cropping Shear Cycle: 10 Cuts per Minute Electrical Supply: 480/3/60, AC to DC, All DC Motors 0 to 500V Modern (Should be Baked & Checked before Using) Air Supply: 80 PSI Mode of Operation: Loop or Helper Drive Line Direction: Right to Left Pay-Off Direction: Over Unwind Rewind Direction: Over Rewind Inspections Equipment w/X-Ray Gauge, Digital Length Measurement EQUIPPED WITH: Floor Type Coil Car Double-End Cone Uncoiler w/Large Wichita Double Air Brake System, Dual Power Rotation Hydraulic Hold Down Roll System Peeler System, In/Out, Up/Down Flattener Entry Pinch Rolls: 12" Dia. x 78" Face Width Flattener Work Rolls: 78" Face Width Entry Butech Crop Shear, Large Edge Guide Assembly Slitter w/DC 500V Motor, AC to DC Controls, Modern SCR Drive w/Controls, Quick Removal Ejector Type w/Two Slitter Heads w/Hydraulic Clamping, 10.5" Dia. Arbors, 200 HP DC Drive for Loop or Helper Drive Slitting, Large Complement of Cutters, Spacers & Rubber Strippers (2) New Heavy Duty Hydraulic Self Ejecting Scrap Winders w/Level Wind for .625" x 3" Edge Trim - OPTIONAL FOR ADDITIONAL COST New Hydraulic Clamp & Drum Insert Device - OPTIONAL FOR ADDITIONAL COST Recoiler w/Dual Hydraulic Snubber, Overarm Separator, 24" Dia. x 84" Face Width x 70,000# Cap. Drum, 13/16" Wide Gripper Slot w/Hyd. Expansion, 2-Speed System, 150 & 500 FPM, Modern 200 HP, 500V, 500/2000 RPM DC Motor Hydraulic Push-Off Pit Type Coil Car w/Rolls for Side Roller Conveyor Feeding All Electrical, Including All Control Consoles, Large Control Cubical w/Fuses, SCR Drives, Pre-Wired All Hydraulics, Including Several Pump & Tank Units w/Many Solenoid Valves, Manifolds, Piping, Hoses Condition: EXCELLENT, As Taken From Service

Specifications

Air Supply (psi)	80
Coil Id Entry Max (mm)	838.2
Coil Id Entry Min (mm)	457.2
Coil Id Exit (mm)	609.6
Coil Weight Entry Exit (kg)	31,751.465
Condition	excellent
Cropping Shear Cycle Cuts Per Minute	10
Electrical Supply	480/3/60 AC to DC
Flattener Entry Pinch Rolls Diameter (mm)	304.8
Flattener Entry Pinch Rolls Face Width (mm)	1,981.2
Flattener Work Rolls Face Width (mm)	1,981.2
Incoming Coil Width Max (mm)	1,828.8
Incoming Coil Width Min (mm)	508
Line Direction	right to left
Material Type	hot rolled, including high strength G80
Max Coil Od Exit (mm)	609.6
Max Line Speed High Gear Fpm	400
Max Line Speed Low Gear Fpm	150
Max Nominal Coil Width Entry (mm)	1,879.6
Max Shear Strength (psi)	80,000
Min Coil Od Exit (mm)	762
Mode Of Operation	loop or helper drive
Pay Off Direction	over unwind
Recoiler Drum Capacity (kg)	31,751.465
Recoiler Drum Diameter (mm)	609.6
Recoiler Drum Face Width (mm)	2,133.6
Recoiler Gripper Slot Width (mm)	20.638
Recoiler Motor Power (hp)	200
Recoiler Motor Rpm High	2,000
Recoiler Motor Rpm Low	500
Recoiler Motor Voltage (v)	500
Recoiler Speed High Fpm	500
Recoiler Speed Low Fpm	150
Rewind Direction	over rewind
Slitter Arbor Diameter (mm)	266.7
Slitter Dc Motor Power (hp)	200
Slitter Motor Voltage (v)	500
Thickness Range Max (mm)	15.875
Thickness Range Min (mm)	1.575
Threading Speed Max Fpm	100
Threading Speed Min Fpm	15