2-3/8" HEINRICH MUELLER, AutoFeed, External, Internal w/Mandrel Swaging or Both
- Manufacturer
- Heinrich Mueller
- Model
- UR5-4-DD-24H
- Year
- 1996
- Condition
- Used
Description
2-3/8" HEINRICH MUELLER, AutoFeed, External, Internal w/Mandrel Swaging or Both AGE: 1996 MODEL NUMBER: UR5-4-DD-24H SPECIFICATIONS: This is a single station swaging machine This machine has both internal rotating spindle and outer roller cage counter rotating ring Capacity: Bars: 5.0mm to 30mm Tubes: 5.0mm to 60mm Swaging Dies: 50mm W x 120mm L x 55mm H This Machine Can: Plunge Feed Infeed Swage Combination Plunge / Infeed Swaging Can Also Swage Over a Mandrel, Hydraulic Powered Rear In Feed of Mandrel / Extraction Stroke Frequency: 1830 RPM Outer Ring Rotation: 200 RPM This is a four die swager with wedge type collapsing system allowing plunging into the center of the part. It also has a 500mm stroke hydraulic feed system with hydraulic part clamping. This machine can also be used to swage internal linear forms such as splines inside of tubing. Wired For: 460/60/3, 80 Amp Control Voltage: 120 and 24 Volt DC EQUIPPED WITH: Interchangeable 4-Die Swaging Head UR5-4ADD-A-3/1 Mandrel and Pusher Device UR5-4DD-N1-05-300 Hydraulic Feed System 24H-4050-03-100 Hydraulic Clamping Jaw 24H-4005-01-200 (40mm Piston) with Rotating Stop 24H-21-200 and Workpiece Orientation System Mandrel Device 24H-4055-00-600 on Feed Slide Feeder Slide Lock Device 24H-5025-00-800 Complete Control System with Operator Control Pedestal Siemens Controls Sound Enclosure Room Type Many Spares NOTE: Originally Built to Produce a Corvett Part with a External Step and an Internal Spline MOTOR DATA: 8.6w, 18kw Plus Hydraulic Pump
Specifications
| Amperage (a) | 80 |
|---|---|
| Bar Capacity Max (mm) | 30 |
| Bar Capacity Min (mm) | 5 |
| Clamping Piston (mm) | 40 |
| Control System | Siemens |
| Control Voltage Dc (v) | 120 and 24 |
| Frequency (Hz) | 60 |
| Hydraulic Stroke (mm) | 500 |
| Motor Power (kW) | 18 |
| Number Of Dies | 4 |
| Outer Ring Rotation (RPM) | 200 |
| Phase | 3 |
| Power Source | electric_and_hydraulic |
| Stroke Frequency (RPM) | 1,830 |
| Swaging Die Height (mm) | 55 |
| Swaging Die Length (mm) | 120 |
| Swaging Die Width (mm) | 50 |
| Swaging Type | internal_external_mandrel |
| Tube Capacity Max (mm) | 60 |
| Tube Capacity Min (mm) | 5 |
| Voltage (v) | 460 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Wire Spring
HOLLAND 77CF WHEELBUILDING MACHINE, 18" - 28" DIAMETER
Holland · 77CF
Spirit Machinery
1-3/4" BERTOLETTE Tube Cut-Off, Pull-Apart, .065" Wall, Unc, 2-Plane Str, Payoff
Bertolette · 315
Bass Machinery
Exit Straightener, 16" x 7-1/2" Base, 7" x 6" Mounting, 3-Axis Adjust, (2) Avail
Bass Machinery
BURR OAK DVBHB-M124-4RH Double Vertical Hairpin Bender, 5" to 48" Hairpins
Burr Oak · DVBHB-M124-4RH · 1995
Bass Machinery
1-1/2" KINEFAC MC-6-F 3-Die Thread Roller, Timers, Parts Ejector, 10 HP
KINEFAC · MC-6-F · 1992
Bass Machinery
7/8" CROWN Straighten & Cut Machine, 1" to Inf Cut Length, AB Touchscreen
Crown · STCOS-M10
Bass Machinery
