Wire Spring·Wire Shear

12.7mm NIKOM High Speed Impact Shear, 2-Plane Straightener, 100 PM @ 2" Length

Sold by Bass Machinery·Available·Last verified 4h ago

Manufacturer: NIKOM
Model: PSA20
Year: 1995
Condition: Used

Description

12.7mm NIKOM High Speed Impact Shear, 2-Plane Straightener, 100 PM @ 2" Length AGE: 1995 MODEL NUMBER: PSA20 SPECIFICATIONS: Machine designed to shear at a high rate of speed, greatly reducing plastic deformation, resulting in clean, burr-free, square and scrap-free cuts. Machine is currently set-up to be feed from coil or could be made to feed bars. Diameter, Max.: 12.7mm (.500") Mild Steel 12mm (.472") Steel 15mm (.591") Copper, Brass and Aluminum Can Cut Shapes with Custom Tooling Feed Length, Min.: 1/2" (1) Die Thickness Feed Length, Per Stroke, Max.: 15.75" Feed Length, (3) Strokes, Max.: 47-1/4" Production Rate: Approaching 100 PPM at 2" Length (See Manufacturers PDF Output Chart) Cutting Length Deviations, Standard: +/- .002mm Impact Cylinder Provides 196 Nm of Energy (1,735 in./lbsF) at a Piston Speed Maximum of 10 Meters/Sec. Operating Air Pressure Required: 120 PSI EQUIPPED WITH: Sound Enclosure 2-Plane Straightener, 3 Over 4 Rolls Each Plane For Feed Wire From Coils Cutting Dies for (14) Different Diameters: From 3/32" to 17/32" Diameter Dies are 2-1/4" Sq. x 1" and are Reversible - They can be used as many as (8) Times Between Sharpenings Original Prints, Manual and Software Diskettes Included CONDITION: Good, Takes Directly from Service

Specifications

Cutting Length Deviation (mm)	0.002
Die Count	14
Die Diameter Range Max (mm)	13.494
Die Diameter Range Min (mm)	2.381
Die Dimensions (mm)	57.15 x 25.4
Die Reusable Sharpenings	8
Impact Energy Nm	196
Max Cutting Diameter Copper Brass Aluminum (mm)	15
Max Cutting Diameter Mild Steel (mm)	12.7
Max Cutting Diameter Steel (mm)	12
Max Feed Length Per Stroke (mm)	400.05
Max Feed Length Three Strokes (mm)	1,200.15
Min Feed Length (mm)	12.7
Operating Air Pressure (kPa)	827.36
Piston Speed Max (m/s)	10
Production Rate Length (mm)	50.8
Production Rate Ppm	100
Straightener Rolls Per Plane	3_over_4
Straightener Type	2_plane