Coil Processing·Ring Slitter
10" x 4" RUESCH Ring Slitter, Entry Guides, Winder, 7-1/2 HP
Sold by Bass Machinery·Available·Last verified 3h ago
- Manufacturer
- RUESCH
- Condition
- Used
Description
10" x 4" RUESCH Ring Slitter, Entry Guides, Winder, 7-1/2 HP SPECIFICATIONS: Mounted on Slitter, Driven Off Main Slitter Motor Width: 10" Arbor: 4" Dia. x 11" Face Mandrel: 10" Dia. x 12" Face EQUIPPED WITH: Blades Entry Guides Winder MOTOR DATA: 7-1/2 HP, 1760 RPM, 220/440/60/3, 20.6/10.3 Amps, 58.62:1 Ratio
Specifications
| Amperage (a) | 20.6/10.3 |
|---|---|
| Arbor Diameter (mm) | 101.6 |
| Arbor Face (mm) | 279.4 |
| Equipped With | blades, entry guides, winder |
| Frequency (Hz) | 60 |
| Gear Ratio | 58.62:1 |
| Mandrel Diameter (mm) | 254 |
| Mandrel Face (mm) | 304.8 |
| Motor (RPM) | 1,760 |
| Phase | 3 |
| Power Output (kW) | 5.593 |
| Voltage (v) | 220/440 |
| Width (mm) | 254 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
10" x 4" RUESCH RING SLITTER
RUESCH
National Machinery Exchange
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
48"X7"X30,000 LBS,YODER,PULL THRU TYPE, UNDER POWER 1966
Yoder · 1966
Spirit Machinery
14 STND SME,3.5"SHAFT DIA,KEYWAY IS .625"WIDE X .375"DEEP,100 FPM,40 HP
SME · 14 STND
Spirit Machinery
