10" x 4" RUESCH RING SLITTER
- Manufacturer
- RUESCH
- Condition
- Used
Description
10" x 4" RUESCH RING SLITTER SPECIFICATIONSITH BLADES -MANUFACTURER: RUESCH -TYPE: RING SLITTER -SIZE: 10" (254mm) WIDE -ARBOR -DIAMETER: 4" (101.6mm) -FACE WIDTH: 11" (279.4mm) -DRIVE MOTOR: GENERAL ELECTRIC GEARMOTOR 7 1/2" HP (5.6Kw) 1760 RPM 220/440 VOLT 3 PHASE 60 HERTZ 20.6/10.3 AMPS 58.62/1 RATIO NOTE: SLITTER IS EQUIPPED WITH ENTRY GUIDES. -WINDER -TYPE: MOUNTED ON SLITTER DRIVEN OFF MAIN SLITTER MOTOR -MANDREL SIZE -DIAMETER: 10" (254mm) -FACE WIDTH: 12" (304.8mm)
Specifications
| Arbor Diameter (mm) | 101.6 |
|---|---|
| Arbor Face Width (mm) | 279.4 |
| Drive Motor Manufacturer | General Electric |
| Drive Motor Type | gearmotor |
| Gear Ratio | 58.62:1 |
| Mandrel Diameter (mm) | 254 |
| Mandrel Face Width (mm) | 304.8 |
| Motor Amperage (a) | 20.6/10.3 |
| Motor Frequency (Hz) | 60 |
| Motor Phase | 3 phase |
| Motor Power (kW) | 5.6 |
| Motor (RPM) | 1,760 |
| Motor Voltage (v) | 220/440 |
| Slitter Width (mm) | 254 |
| Winder Type | mounted on slitter |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
10" x 4" RUESCH Ring Slitter, Entry Guides, Winder, 7-1/2 HP
RUESCH
Bass Machinery
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
48"X7"X30,000 LBS,YODER,PULL THRU TYPE, UNDER POWER 1966
Yoder · 1966
Spirit Machinery
14 STND SME,3.5"SHAFT DIA,KEYWAY IS .625"WIDE X .375"DEEP,100 FPM,40 HP
SME · 14 STND
Spirit Machinery
