Coil Processing·Slitting Line

72" x 7" x 60,000 Lb CINCINNATI Slitting Line

Sold by Bass Machinery·Available·Last verified 4h ago

Manufacturer: Cincinnati
Condition: Used

Description

72" x 7" x 60,000 Lb CINCINNATI Slitting Line SPECIFICATIONS: Material Width: 12" to 72" Coil Weight: 60,000 Lbs. Entry, 50,000 Lbs. Exit Coil I.D.: 20" to 24" Coil O.D.: 72" Line Direction: Left to Right CONSISTING OF: 50,000 Lb. Model HDR 72-250 Mandrel Uncoiler: 73" Mandrel Face Hydraulic Expansion Powered Holddown Roll Wichita Water Cooled Brake Sliding Base Hydraulic Motor Feedup Outboard Bearing Support (2) 72" x 7" Arbor Dia. CINCINNATI Model R.H.S.L. Slitter Heads: (2) Removable Head Slitters 76" Face Arbors Outboard Housing Slides in to 48" for Slitting Heavier Gauges Parallel Arbor Adjustment 12" to 14" Approx. Knife O.D. 1.125" x .375" Key Size Jet Nuts 20 HP AC Motor, 1570 RPM, 240/480V (2) Scrap Winders: Hydraulic Motor Driven Powered Open / Close Sliding Dump Table 50,000 Lb. Model 72-40-50K Recoiler: 20" Dia. x 80" Face Drum with Pads for 24" Powered Expansion and Gripper Overarm Separator Hydraulic Pushoff 100 HP DC Motor with Cleveland R.A. Gearbox 4-Speed Drive-All Transmission with 1:1, 2:1, 3.053:1 and 4.077:1 Ratios 41" Floor to Center of Drum Approx. Passline Electrics, Hydraulics and Controls

Specifications

Coil Id Max (mm)	609.6
Coil Id Min (mm)	508
Coil Od (mm)	1,828.8
Coil Weight Entry (kg)	27,215.5
Coil Weight Exit (kg)	22,679.6
Key Size (mm)	28.575
Knife Od Max (mm)	355.6
Knife Od (mm)	304.8
Line Direction	left_to_right
Mandrel Face (mm)	1,854.2
Material Width Max (mm)	1,828.8
Material Width Min (mm)	304.8
Passline Height (mm)	1,040.4
Recoiler Capacity (kg)	22,679.6
Recoiler Drum Dia (mm)	508
Recoiler Drum Face (mm)	2,032
Recoiler Drum Pad Capacity (mm)	609.6
Recoiler Expansion	powered
Recoiler Gearbox	Cleveland R.A.
Recoiler Model	72-40-50K
Recoiler Motor Power (kW)	74.57
Recoiler Motor Type	dc
Recoiler Transmission	4-speed
Recoiler Transmission Ratios	1:1, 2:1, 3.053:1, 4.077:1
Scrap Winder Count	2
Scrap Winder Drive	hydraulic
Slitter Arbor Dia (mm)	177.8
Slitter Arbor Face (mm)	1,930.4
Slitter Head Count	2
Slitter Head Model	R.H.S.L.
Slitter Housing Slide (mm)	1,219.2
Slitter Motor Power (kW)	14.914
Slitter Motor (RPM)	1,570
Slitter Motor Voltage (v)	240/480
Uncoiler Brake	water_cooled
Uncoiler Capacity (kg)	22,679.6
Uncoiler Expansion	hydraulic
Uncoiler Model	HDR 72-250