Coil Processing·Slitting Line

72" x 10" x 60,000 Lb CINCINNATI Slitting Line

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: Cincinnati
Condition: Used

Description

72" x 10" x 60,000 Lb CINCINNATI Slitting Line SPECIFICATIONS: Coil Weight, Max.: 60,000 Lbs. Coil I.D., Entry: 20" to 24" Coil I.D., Exit: 20" and 24" Coil O.D., Max.: 72" Coil Width: 12" to 72" Thickness: 0.0924" to 0.375" Shear, Max.: 45,000 PSI Yield, Max.: 45,000 PSI Line Speeds: 100/200/300 FPM @ 24" Dia. Bare Drum Speed Line Direction: L-to-R Mode of Operation: Pull Thru / Slitter Assist CONSISTING OF: Entry Turnstile: (3) Arms x 60,000 Lbs. Per Arm Powered Rotation Slotted for C-Hooks Entry Coil Car: Mast Type Floor Mounted Self-Contained Hydraulic Unit Powered Lift & Traverse Cable Reel Uncoiler: Single Mandrel Type Powered Expansion Hold-Down With Powered Snubber Roll Wichita Water Cooled Brake with Cooler Slide Base Feed-Up Drive Entry Unit: Extending Blade Type Peeler Entry Pass-Line Roll Manual Side Guides Powered Entry Pinch Rolls Crop Shear-Down-Cut type Carry-Over Table (2) Slitter Heads: Crane Removable Type 10" Diameter Arbors Powered Outboard Retraction Powered Top Arbor Adjust Over the Arbor Design to Slit 36" to 72" Widths Stationary Slitter Drive Base: 75 HP, 650/1950 RPM DC Motor 27.43:1 H & S Speed Reducer Powered Head Lock Pit Section: Mounted to Tension Stand Entry Pass-Line Roll Carry-Over Table Coil Pro Tension Stand: Age: 2000 Drag Type Clam Shell Opening Separator Arm on Slide-Out Frame Internal Deflector Rolls Exit Crop Shear, Down-Cut Type Recoiler Feed Table (2) Scrap Winders: Automatic Scrap Dump Level Wind Recoiler: Chicago Recoiler Drum Age: 2008 Drum Diameter: 20" Hydraulic Expansion and Gripper Hydraulic Push-Off 50:1 Internal Gear Reduction 100 HP, 650/1950 RPM DC Motor Drive-All Reducer With (3) Speeds Bolt-On Risers: 24" I.D. Overarm Separator Assembly: Floor Mounted Banding Assist Arm Exit Coil Car: Mast Type Floor Mounted Self-Contained Hydraulic Unit Powered Lift and Traverse Narrow Coil Retaining Tracks Cable Reel Exit Turnstile: (2) Arms x 60,000 Lbs. Per Arm Powered Rotation Powered Push-Off Slotted for C-Hooks Electrical Controls: Age: 2006 Main Operators Control Panel With Touch Screen AC/DC Control Cabinets Eurtherm 590+ DC Drives Hydraulic System Tooling: Shimless Multiple Sets of Tooling Knives 1" Knives New In 2019 (Never Used) Steel Spacers Rubbers Separator Tooling New AC/DC Controls Added in 2006 @ $125,000 New Chicago Recoiler Drum Added in 2008 @ $150,000 Line Installed REQUIRED FLOORSPACE: 50' x 90'

Specifications

Coil Id Entry (mm)	609.6
Coil Id Exit (mm)	609.6
Coil Od Max (mm)	1,828.8
Coil Weight Max (kg)	27,215.42
Coil Width (mm)	1,828.8
Controls Upgrade Cost Usd	125,000
Controls Year	2,006
Entry Turnstile Arms	3
Entry Turnstile Capacity Per Arm (kg)	27,215.42
Line Direction	L-to-R
Line Speed Max Fpm	300
Mode Of Operation	Pull Thru / Slitter Assist
Recoiler Drum Diameter (mm)	508
Recoiler Gear Reduction Ratio	50
Recoiler Motor (hp)	100
Recoiler Motor (RPM)	1,950
Recoiler Riser Id (mm)	609.6
Recoiler Upgrade Cost Usd	150,000
Recoiler Year	2,008
Required Floorspace Length (ft)	90
Required Floorspace Width (ft)	50
Shear Max (psi)	45,000
Slitter Arbor Diameter (mm)	254
Slitter Drive Motor (hp)	75
Slitter Drive Motor (RPM)	1,950
Slitter Speed Reducer Ratio	27.43
Slitter Width Range (mm)	914.4 to 1828.8
Tension Stand Type	drag_type
Tension Stand Year	2,000
Thickness Max (mm)	9.525
Thickness Min (mm)	2.347
Yield Max (psi)	45,000