Coil Processing·Slitting Line

72" x .135" x 65,000# STAMCO SINGLE LOOP SLITTING LINE

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: STAMCO
Year: 1992
Condition: Used

Description

72" x .135" x 65,000# STAMCO SINGLE LOOP SLITTING LINE GENERAL SPECIFICATIONS: MANUFACTURER - STAMCO YEAR - 1992 LINE DIRECTION - LEFT to RIGHT (TURNSTILES LOAD AND UNLOAD ON DRIVE SIDE) MATERIALS - C.R.S, HRP&O, HOT DIP GALV., ELECTRO GALV., PRE-PAINTED THICKNESS - .015" MIN., .135" MAX. SHEAR STRENGTH - 40,000 PSI MIN., 90,000 PSI MAX. YIELD STRENGTH - 35,000 PSI MIN., 90,000 PSI MAX. COIL WIDTH - 12" MIN., 72" MAX. (74" UNTRIMMED) COIL WEIGHT - 65,000# MAX. (ENTRY & EXIT) COIL OUTSIDE DIAMETER - 36" MIN., 80" MAX. (ENTRY & EXIT) COIL INSIDE DIAMETER (ENTRY) - 20" TO 24" (28" TO 32" w/ FILLER PLATES) COIL INSIDE DIAMETER (EXIT) - 20" or 24" (VIA QUICK CHANGE "QUILL" TYPE DRUMS) SLITTER ARBOR DIAMETER - 8.000" NUMBER OF (PACKED ARBOR) SLITTER HEADS - TWO (2) NUMBER OF EDGE TRIMMER HEADS - ONE (1) SLITTER HEAD EXCHANGE STYLE - INJECTOR w/ ROTATING CAROUSEL TRAY LINE SPEED - 500 FPM MAX. (LOW GEAR), 1000 FPM MAX. (HIGH GEAR) UNCOILER DRIVE - 200 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE SLITTER DRIVE - 125 HP DC SCRAP BALLER DRIVE - AC MOTOR ROLL TENSION STAND DRIVE - 125 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE RECOILER DRIVE - 200 HP DC LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ 20" / 24" HYDRAULIC DRUM, SLIDE BASE, HOLD- DOWN ROLL AND 125 HP FEED-UP DRIVE / DRAG GENERATOR BRAKE UNCOILER OUTBOARD SUPPORT BOLT-ON PLASTIC UNCOILER FILLER PLATES FOR 28" TO 32" ID COILS "NORTH AMERICAN" ELECTRONIC EDGE CONTROL SYSTEM DUAL PIVOTING AND TELESCOPING PEELER BLADES TO ACCOMMODATE UNDER AND OVER WINDING FROM UNCOILER ENTRY PINCH ROLLS ENTRY CROP SHEAR w/ THREADING TABLE AND SCRAP CART "LORAL" NON-CONTACT THICKNESS MEASUREMENT SYSTEM ROLLER TYPE SIDE GUIDES PIVOTING SLITTER ENTRY BRIDLE ROLL SLITTER BASE AND 125 HP DC DRIVE TWO (2) PACKED ARBOR INJECTOR SLITTER HEADS w/ 8.000" ARBORS ONE (1) SIDE TRIMMING INJECTOR HEAD POWERED SLITTER HEAD INJECTOR SYSTEM SLITTER HEAD STORAGE TRAY w/ THREE (3) STORAGE POSITIONS ONE (1) LOT of SLITTER AND SEPARATOR TOOLING w/ CABINETS HEAVY-DUTY EDGE TRIM SCRAP BALLER SYSTEM PIVOTING PIT THREADING TABLES DUAL STRIP SEPARATOR SPINDLES w/ QUICK CHANGE TOOLING SYSTEM AND STRIP SNUBBER ROLL ROLL TYPE TENSION STAND w/ 125 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE TAIL CLAMPING PAD THIRTEEN (13) ROLL SHAPE CORRECTION LEVELER w/ QUICK CHANGE CASSETTE EXIT CROP SHEAR AND SCRAP CART PIVOTING SCRAP / STRIP INSPECTION TABLE w/ OVERHEAD LIGHTS EXIT PASS LINE ROLL PIVOTING RECOILER THREADING TABLE w/ PIVOTING STRIP HOLD-DOWN CLAMP 20" / 24" QUILL TYPE DRUM TURRET RECOILER DRIVE BASE w/ SLIDING COUPLING AND 200 HP DC DRIVE TURRET RECOILER ROTATING BASE w/ TWO (2) HOLLOW-BORE DRUM FRAMES, TWO (2) PIVOTING OVERARM SEPARATORS AND TWO (2) COIL PUSHERS FLOOR LEVEL COIL UNLOADING CAR w/ POWERED COIL STABILIZING CLAMP "IN-FLOOR" POWERED TURNTABLE TO ROTATE COIL CAR NINETY (90) DEGREES "IN-FLOOR" SCALE TO MEASURE EXIT COIL WEIGHT FOUR (4) ARM EXIT STORAGE TURNSTILE OPERATOR CONTROL STATIONS AC CONTROLS VARIABLE SPEED DRIVE CONTROLS CLOSED LOOP HYDRAULIC SYSTEM

Specifications

Coil Inside Diameter Entry Max (mm)	609.6
Coil Inside Diameter Entry Min (mm)	508
Coil Inside Diameter Entry With Filler Max (mm)	812.8
Coil Inside Diameter Entry With Filler Min (mm)	711.2
Coil Inside Diameter Exit (mm)	609.6
Coil Outside Diameter Max (mm)	2,032
Coil Outside Diameter Min (mm)	914.4
Coil Weight Max (kg)	29,483.7
Coil Width Max (mm)	1,828.8
Coil Width Min (mm)	304.8
Coil Width Untrimmed Max (mm)	1,879.6
Entry Storage Turnstile Arms	4
Exit Storage Turnstile Arms	4
Leveler Roll Count	13
Line Direction	left_to_right
Line Speed High Gear Fpm	1,000
Line Speed High Gear Mpm	304.8
Line Speed Low Gear Fpm	500
Line Speed Low Gear Mpm	152.4
Material Thickness Max (mm)	3.429
Material Thickness Min (mm)	0.381
Materials Processable	CRS, HRP&O, hot_dip_galv, electro_galv, pre_painted
Number Of Edge Trimmer Heads	1
Number Of Slitter Heads	2
Recoiler Coil Pushers	2
Recoiler Drive (hp)	200
Recoiler Drive (kW)	149.14
Recoiler Drum Frames	2
Recoiler Overarm Separators	2
Roll Tension Stand Drive (hp)	125
Roll Tension Stand Drive (kW)	93.213
Separator Spindles	2
Shear Strength Max (psi)	90,000
Shear Strength Min (psi)	40,000
Slitter Arbor Diameter (mm)	203.2
Slitter Drive (hp)	125
Slitter Drive (kW)	93.213
Uncoiler Drive (hp)	200
Uncoiler Drive (kW)	149.14
Yield Strength Max (psi)	90,000
Yield Strength Min (psi)	35,000