BRONX 6CR7 6 ROLL ROTARY TUBE STRAIGHTENER
- Manufacturer
- Bronx Engineering Co. (U.K.) Ltd.
- Model
- 6CR7-BWS
- Condition
- Used
Description
BRONX 6CR7 6 ROLL ROTARY TUBE STRAIGHTENER MANUFACTURER: BRONX ENGINEERING CO. (U.K.) LTD. TYPE: 6 ROLL ROTARY TUBE STRAIGHTENER MODEL No.: MODEL 6CR7-BWS DIRECTION: LEFT TO RIGHT WITH LOADING AND DISCHARGE TABLES CAPACITY (COPPER & BRASS): MAXIMUM TUBE DIAMETER PER MANUFACTURER'S SPECS: 7" (178mm) MAXIMUM TUBE DIAMETER AS USED: 8" (203mm) MINIMUM DIAMETER SOFT. Cu.: 3/4" (19mm) MINIMUM DIAMETER HALF HARD: 1 3/8" (35mm) MAXIMUM TUBE LENGTH: 20 FT. (6.1m) - DETERMINED BY TABLE LENGTH - CAN BE EASILY LENGTHENED STRAIGHTENING SPEED: 0-50 FPM (0-15m/min.) ROLL TYPE: PARABOLIC (CONCAVE) CENTER DIAMETER: 9" (228mm) END DIAMETER: 10" (254mm) ROLL FACE: 14" (355mm) No. OF ROLLS: 6 (ALL DRIVEN) MOTORS: QUANTITY: 2 EACH MOTOR DRIVES 3 ROLLS SIZE: 12 HP, 720 RPM, 415 VOLT, 3 PH., 50 HZ DRIVE: RELIANCE MINITRON S-2 SERIES, SCR THYRISTOR VARIABLE SPEED PARAFIN FEED: MOTORIZED ROLL ADJUSTMENT: MANUAL PRESSURE INDICATORS: STATIMETERS FITTED TO THREE TOP ROLLS LUBRICATION: GREASE ENTRY AND EXIT TABLES: 20 FT. (6.1m) INCLUDED NOTE: ENTRY AND EXIT STORAGE RACKS AND INCISOR SHOWN IN PHOTOS ARE NOT INCLUDED **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
Specifications
| Direction | left_to_right |
|---|---|
| Drive Model | Reliance Minitron S-2 Series |
| Drive Type | SCR_thyristor_variable_speed |
| Entry Exit Table Length (m) | 6.1 |
| Lubrication Type | grease |
| Maximum Tube Diameter Spec (mm) | 178 |
| Maximum Tube Diameter Used (mm) | 203 |
| Maximum Tube Length (m) | 6.1 |
| Minimum Diameter Half Hard (mm) | 35 |
| Minimum Diameter Soft Copper (mm) | 19 |
| Motor Frequency (Hz) | 50 |
| Motor Phase | 3ph |
| Motor Power (hp) | 12 |
| Motor Quantity | 2 |
| Motor Speed (RPM) | 720 |
| Motor Voltage (v) | 415 |
| Roll Adjustment | manual |
| Roll Center Diameter (mm) | 228 |
| Roll Count | 6 |
| Roll End Diameter (mm) | 254 |
| Roll Face Width (mm) | 355 |
| Roll Type | parabolic_concave |
| Straightening Speed Max (m/min) | 15 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Wire Spring
6-1/2" MEDART Tube Straightener, 3 Over 2, 0 to 120 FPM, Entry Pinch Rolls
Medart · 632
Bass Machinery
BLIS/MACK-HEMP #916, 6-ROLL ROTARY TUBE STRAIGHTENER
BLIS/MACK-HEMP · 916
National Machinery Exchange
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
SUTTON · 4KTC
National Machinery Exchange
HOLLAND 77CF WHEELBUILDING MACHINE, 18" - 28" DIAMETER
Holland · 77CF
Spirit Machinery
1-1/2" KINEFAC MC-6-F 3-Die Thread Roller, Timers, Parts Ejector, 10 HP
KINEFAC · MC-6-F · 1992
Bass Machinery
BURR OAK DVBHB-M124-4RH Double Vertical Hairpin Bender, 5" to 48" Hairpins
Burr Oak · DVBHB-M124-4RH · 1995
Bass Machinery
