Wire Spring·Tube Drawing Block

24" (610mm) x 2000# (907 KG) MARSHALL RICHARDS TUBE SPINNER BLOCK (8063)

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: Marshall Richards Machine Ltd.
Model: 8063
Condition: Used

Description

24" (610mm) x 2000# (907 KG) MARSHALL RICHARDS TUBE SPINNER BLOCK (8063) MANUFACTURER: MARSHALL RICHARDS MACHINE LTD. (U.K.) TYPE: VERTICAL CONTINUOUS SPINNER TYPE TUBE DRAWING BLOCK CAPACITY: MAXIMUM ENTRY SIZE (COPPER TUBE): 7/16" (11mm) O.D. MINIMUM EXIT FINISH SIZE: 0.080" (1.8mm) O.D. x 0.0157" (0.4mm) WALL THICKNESS MAXIMUM COIL WEIGHT: 165 LBS. (75 KG) SPEED RANGE: 0-2000 FPM (0-610mm/min.) PULLING FORCE: 2000 LBS (900 KG) @ 0-500 FPM (0-150m/min.) 500 LBS (227KG) @ 500-2000 FPM (150-610m/min.) MACHINE CONSISTS OF: PAYOFF TABLE DRAWING BLOCK DIE BOX (SUITABLE FOR 1 OR 2 DIES IN TANDEM) ROTATING TAKE-UP TABLE FOR RECEIVING BASKETS. NOT A CARROUSEL SYSTEM. BUYER TO SUPPLY ENTRY AND EXIT CONVEYORS TO REMOVE AND LOAD BASKETS ELECTRICS: BLOCK, PAYOFF AND TAKE-UP STAND ARE EACH POWERED BY SEPARATE D.C. MOTORS. BLOCK WAS ORIGINALLY SUPPLIED WITH A MAWDSLEY MOTOR GENERATOR SET WITH THE FOLLOWING SPECIFICATIONS. BUYER TO SUPPLY NEW SCR ELECTRICAL DRIVE PACKAGE. 45 B.H.P., 3 PH., 50 HZ, 380 VOLT, 1460 RPM OUTPUT 230 VOLT, D.C., 23 KW MACHINE HAS BEEN PLACED IN HEATED AND PROTECTED STORAGE.

Specifications

Maximum Coil Weight (kg)	75
Maximum Entry Size Od (mm)	11
Minimum Exit Finish Size Od (mm)	1.8
Minimum Exit Finish Size Wall (mm)	0.4
Motor Frequency (Hz)	50
Motor Input Voltage (v)	380
Motor Output Power (kW)	23
Motor Output Voltage Dc (v)	230
Motor Phase	3
Motor Power (hp)	45
Motor (RPM)	1,460
Pulling Force High Speed Fpm Max	610
Pulling Force High Speed Fpm (min)	150
Pulling Force High Speed (kg)	227
Pulling Force Low Speed Fpm Max	150
Pulling Force Low Speed (kg)	900
Speed Range Max (mm/min)	610
Type	vertical_continuous_spinner