Wire Spring·Cnc Wire Former

ITAYA #MCS-8E CNC WIRE FORMER

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: ITAYA
Model: MCS-8E
Condition: Used

Description

ITAYA #MCS-8E CNC WIRE FORMER Maximum Wire Diameter: .032" Maximum Spring Diameter: .280" Maximum Spring Length: 1.80" Camshaft Characteristics: Min. Increment: Plus or Minus 0.1 Degrees Max. Increment: Plus or Minus 359.9 Degrees Max Speed: 125 rpm Wire Feed Characteristics: Min. Increment: Plus or Minus .002", Max. Increment Plus or Munus 400" Max. Feed Speed: 2400" per min. Memory: 235 steps per program, Program Storage: 200 program 3.5" floppy disk Power:Wire Feed 400W, Camshaft 400W Power Consumption: (200v/3/60): 5A Dimensions: 58" x 37" x 20" Weight: 1150 lbs. Equipped with: 1 T Slides 1 Cut Slide Diameter Control No Straightener 23000 hours

Specifications

Amperage (a)	5
Camshaft Max Increment Degrees	359.9
Camshaft Min Increment Degrees	0.1
Camshaft Power (w)	400
Cut Slide	1
Frequency (Hz)	60
Height (mm)	508
Length (mm)	1,473.2
Maximum Feed Speed Mm Per (min)	60,960
Maximum Speed (RPM)	125
Maximum Spring Diameter (mm)	7.112
Maximum Spring Length (mm)	45.72
Maximum Wire Diameter (mm)	0.813
Memory Steps Per Program	235
Operating Hours	23,000
Phase	3
Program Storage Count	200
Program Storage Media	3.5_inch_floppy_disk
T Slides	1
Voltage (v)	200
Weight (kg)	521.631
Width (mm)	939.8
Wire Feed Max Increment (mm)	10.16
Wire Feed Min Increment (mm)	0.051
Wire Feed Power (w)	400