|
MODEL/TYPE: 'Boremation' series Heavy Duty / Cross sliding Table -
Hydraulic
Serial Number: M - 226
AGE: 1980's
SPECIFICATIONS & DESCRIPTION:
OEM: This machine was manufactured by Drillmation company of
Centerline, Michigan and equipped with a Stand-alone, Heavy-duty,
Hi-Pressure Hydraulic coolant system manufactured by Eldorado Company
Drilling capacity: 1/8" to 2.0"Dia
Effective drilling depth (stroke) whip guides: 42"
Spindle centerline to table clearance: Variable
Way bars: 1" x 2"
Work Table Data: Cross sliding & Elevating & In/Out
Work Area: 24" x 56"
Machining travel range: 30" (Y) cross x 42" (X) deep
Vertical travel: 24" (Z)
Spindle speed range: 500-4500 RPM infinetly variable in (3 stages)
Feed rates: Hydraulic: .500-2400 ipm
Variable in .100" increments
Rapid traverse feed rate: 100 ipm
Screw drive - DC Servo Type
Coolant system - Type 10-150-15
Coolant reservoir capacity: 150 gals.
Machine weight and dimension: (15,000# gross wt/approximate
Floor space: 7-1/2' W x 13'6" L
Filtration-via Labyrinth tank and disposable cartridge filters
EQUIPMENT & SPECIAL FEATURES:
Heavy duty cast iron spindle saddle assembly
Automatic lubricated spindle bearings
Infinitely variable Hydraulic feed drive system
Full flow chip box
Filtered coolant to drill @ 15 gpm-1,000 psi
Filtration is valid to 10 microns
ELECTRICS: 7.5 HP Drilling Head - 240/480V - 3 Ph - 50/60Hz
Main Drive system
Nema electrical controls- Coolant pump system (15 gpm variable)
CONDITION: Machine is in good condition. Recently removed from service
- In warehouse storage
RETURN
to our home page