THERMTRONIX CATHODIC E-COAT SYSTEM QUOTE# 75C-690

MODEL/TYPE: 2’ X 5’ Part - TTX & CONTINUOUS New: 2004

General description:

This is a TectronicX - continuous (not indexing) Electro-Deposition Coating System which includes
n eleven station pre-treatment system, a cathodic type E-coat dip coating unit and a 3-station post-
inse system, overhead gas curing oven, a lab testing/processing station, automated 3” monorail
aterial handling system, a complete waste treatment with R-O capability and all related component pa
ts and accessories for a complete e-coat coating system

General System Parameters:

Designed part capacity:24”DOT - W x 60” H x 60” L (Horizontal)
Designed line speed:6.6 FPM
Overhead monorail system – type #348 chain – open channelWork load Bars
Heavy duty drives – vari-speed, pneumatic take-up, chain lube and cleaners
Gas Cure oven – located over the e-coat sectiondesigned for 40 minutes of cure @ 375F
Designed for 6.6 FPM - 4 passes inside oven
Complete waste-water treatment system
Includes R-O section
Floor space - foot-print: approx:60’ W x 180’L x 56’ OAH above floor
Note: footprint includes the waste-water treatment system

Zinc Phosphate Pretreatment System & E-coat Dip Tank
Stage 1 - spray clean - 90 sec. @ 160 degrees F Stage 2 - Immersion clean - 114 sec
160 degrees F
Stage 3 - Spray rinse - 36 sec. amb.
Stage 4 - Immersion rinse - 32 sec - amb. Stage 5 - Immersion conditione
- 45 sec. - amb.
Stage 6 - Zinc Phos. - 128 sec. - 135 degrees F Stage 7 - Spray rinse - 36 sec. am
.
Stage 8 - Immersion rinse - 45 sec. amb. Stage 9 - Spray seal - 36 sec.
- amb.
Stage 10 - Immersion RO - 45 sec. amb. Stage 11 - Spray RO - 18 sec. -
mb.

Stage 12 – E-coat - Cathodic Dip Tank - tubular type anodes

Post Rinse section:
Stage 13 - Spray permeate - 36 sec.
Stage 14 - Immersion permeate - 45 sec.
Stage 15 - spray permeate - 38 sec

RETURN to complete inventory display       RETURN to our home page