MODEL/TYPE: Model FHOR 6-125 TG4
Rebuilt 2000

This is a 4-station Trunion type boring and tapping machine
remanufactured with PLC controls. It is arranged with 6 machining
stations (3 per side) and equipped with 4 work-position stations

SPECIFICATIONS & DESCRIPTION:
OEM - Italian manufacturer (supported in US by Kaufman Mfg Company)
Type of machining operations: Boring & Tapping
Work chamber set up with 4 stations: 3 work holding stations &
1 load/unload station & 6 machining spindles radially positioned to
the machine centerline - (3) spindles / side
(6) Machining spindles configured as follows: 4 - boring (2) per side
Boring heads motor drive rated @ 4 KW ( approx 5.4 HP)
Lead screw Tapping heads motor drive rated @ 7.5 HP
Note: Threading motor equipped with a Toshiba VF-9 Breaker controller
on tapping heads for higher working torque
Production rates vary based on the programmed cycle -
typical cycle (10 cpm)
Machining capacity: Spindle nose to turret centerline 9" (230 mm)
Spindle in-feed stroke 5" (125 mm)
Spindle taper: ISO 50
Jaw Height: 3-3/4" (95 mm)
Spindle thrust - pneumatic: 1500 pounds @ 90 psi air pressure
Machine: Gross weight & dimensions: (approx 18,000# gross wt)
12' W x 6’ H x 9'L (approx)

EQUIPMENT & SPECIAL FEATURES:
(1) Lot of misc tools & accessories, manuals, etc.
Chip Conveyor unit
Flood Coolant system
Machine Manuals included

ELECTRONICS:
Equipped with a’ Koyo Direct Logic’ series 205 PLC control system

POWER: Hydraulic pump & tank 220/440 VAC

CONDITION: Machine is in very good condition. Currently set-up and
operating in Plant

RETURN to complete inventory display       RETURN to our home page