Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct. 
It is the buyer's responsibility to confirmed prior to purchase.


Equipped with:
   Leybold-Heraeus NT 150/360 Frequency Converter (see below for details)
   Leybold-Heraeus, #WAU500/D90A, Verti Pump System
         Root Pump WAU500 s/n 1185330234
                  Approved Fluid HE-200
         Vane Pump D90A s/n 1285252787
                  Approved Fluid HE-175
          Voltage: 460V / 3 / 60
          Starting Amp:                45 Amp
          Running Current:              9 Amp

Unit appears to be in Excellent condition with very little use; includings

many fixtures


GENERAL SPECIFICATIONS FOR MACHINE AS FOLLOWS:

Smallest Detectable Leak
   w/Options Quick-Test:           10-6 atm cc/sec
   w/out Quick-Test:               2x10 -10 atm cc/sec
   w/out Quick-Test w/reduced
     Pumping Speed:                2x10 -11 atm cc/sec
Full Scale Leak-Rate Meter Reading
   w/out Quick-Test:               10x10 -9 to 10x10 -6 atm cc/sec
   w/Quick-Test:                   Must multiply meter reading by correction
                                     factor (see manual Section 4-3-2)
Maximum Safe Operating Pressure
   In the Mass Spectrometer (PIII) 1x10 -4 mbar
Detectable Masses:                 3 and helium 4
Adjustable Emission Current:       0.6 to 5mA
Total Pressure Reading
   Thermovac (PII):                10 -3 to 1000 mbar
   Ionization Gauge (PIII):        10 -6 to 10 -3 mbar
Maximum Gas Flow
   @ Test Port:                    2x10 -3 atm cc/sec
Pumping Speet @ Test Port and In Mass Spectrometer
   Ultratest M2:                   For Helium 20 ltr/sec
                                   For Air 7.5 ltr/sec
   Ultratest M2DS/M2BYTC/M2BYPC:   For Helium 16 ltr/sec
                                   For Air 6 ltr/sec
Backing Pump:                      Trivac Vane Pump
   M2 and M2DS:                    D2A (2.2cfm or 1.1 ltr/sec displacement)
   M2BYTC/M2BYPC:                  D4A (4.5cfm or 2.1 ltr/sec displacement)
   Pump Vluis for Trivac:          HE-200
Diffusion Pump:                    Leybodiff 180L
   Pumping Speed For Air:          180 ltr/sec (381cfm) at 10 -5 mbar;
                                     throtted to approx. 2 ltr/sec
   Pump Fluid For Diff. Pump:      HE-300 (50cc optimum)
Cold Trap
   Capacity:                       2.4 qts of liquid nitrogen (LN2)
   Holding Time:                   Approx 20 hrs w/one Filling
Outputs - Recorder Socket But
   Pin 5 (+) to Pin 3:             0 - 10 VDC (10 VDC is full scale
                                    deflectio of leak-rate meter)
   Pin 1 (+) to Pin 3:             1 - 7 VDC in 1 volt steps corresponding
                                     to the 7 leak-rate positions on the
                                     range switch.  The output is 0 when the
                                     range switch is not in a leak-rate
                                     position.
   Triggers 1 & 2 (Optional):      6 Amp, 220 VAC max.
Mains Supply:                      115V, 60 Hz
Recommended Mains Fuse:            10 Amp
Dimensions
   PK Unit:                        22.8" x 16.3" x 16.5"
   Electronic Control Cabinet:     9.2" x 10.3" x 16.1"
   FB Remote Control Module:       8.7" x 9.1" x 5.1"
   Optional Quick-Test Housing:    8.4" x 6" x 3.2"
Weights
   PK Unit:
     Ultratest M2:                 154 lbs
     Ultratest M2DS:               165 lbs
     Ultratest M2BYTC/M2BYPC:      176 lbs
   Electrical Control Cabinet:     28.7 lbs
   FB Remote Control Module:       4.4 lbs
   Optional Quick-Test Housing:    5.5 lbs
Data for Optional Quick-Test
   Smallest Detectable Leakrate:   10 -6 atm cc/sec
   Gas Throughput in Probe:        Approx 90 atm cc/minute
   Sampled Gas Inlet to Leak 
     Detector:                     Approx 10 - 3 atm cc/sec
   Connecting Flange:              NW40KF
   Connecting Flange for 
     Calibrated Leak:              NW10KF
   Line Voltage:                   60 Hz, 220 V
   Dimensions of Housing:          8.4" x 6" x 3.2"
   Weight of Housing:              5.5 lbs
   Probe PVC Tubing
     Length:                       15' standard, up to 100' optional
   Response time for 15' tubing:   Less than 2 seconds
   Weight:                         1.1 lbs

GENERAL SPECIFICATIONS FOR FREQUENCY CONVERTER AS FOLLOWS:
Power Source
   Voltage:                        Single phase, 100/120/220/240
   Frequency:                      47-63 Hz
(Currently set up for 120V / 60Hz)
   Steady Rate Max:                680 VA
   Transient (<0.5 Sec):           750 VA
Output Values
   Voltage:                        45 Vrms
   Rated Frequency:
     TMP-150:                      840 Hz
     TMP-360:                      760 Hz
   Max. Power:
     Acceleration:                 380 Watts
     TMP-150 Normal Operation:     112 Watts
     TMP-360 Normal Operation:     260 Watts
   Relay Contacts:
     Maximum:                      24 VDC & 240 VAC @ 8 A
     Mininum:                      5 VDC @ 1 mA
Environment
   Operating Temperature Range:    0 deg to 45 deg C
   Storage Temperature Range:      -40 deg to +85 deg C
Mechanical Design
   Dimensions approx (w x h x d):  8.39" x 5.08" x 11.42"
   Weight approx:                  18.7 lbs

Ultratest Module MS:  16 1/2" x 9 1/4" x 11" 180 lbs
Ultratest PK Module:  29" x 29" x 26 1/2" 180 lbs
Quick Test Module: 7" x 6" x 8 1/2" 10 lbs
Cart For Machine: 43" x 25 1/2" x 34 3/4"  250 lbs
Wooden Box of Parts:  56 1/2" x 56 1/2" x 24 1/2" 250 lbs
Pumping System:  30" x 49" x 57" 3,500 lbs

RETURN to listing display       RETURN to our home page