Click on picture below for larger version

Specifications from OEM brochure and equipped with are described to the best

of our knowledge. ALL items should be verified by buyer.


Note:
   Loader is new in 2016 and was installed as New March 2018
   ZERO PRODUCTION HOURS
   90mm channel set w/ 3-1/4" front eject collet 
    channel: cap for pushing thru 3.5" bar or 3.25" bars w/ remnant retract
   70mm Channel (must confirm pusher)
    channel: cap for pushing 2-3/4" bar or 2.5" bars w/ remant retract


General Specifications:
Bar Diameter Capacity-No Bar Prep:        20 MM to 90 MM (.787" to 3.540")
Bar Diameter Capacity-With Bar Prep:      20 MM to 100 MM (.787" to 3.940")
Maximum Bar Length:                       4200 MM (13 Feet 8 Inches)
Minimum Bar Length:                       1000 MM (39.400")
Maximum Remnant Length:                   580 MM (22.800")
Magazine Rack Capacity:                   11"
Magazine Rack Angle:                      Adjustable 6-20
Bar Loading Cycle Time:                   45 Seconds For 12-Foot Bar
Material Straightness Specification:      .007" TIR/Foot of Material 
                                          (V Blocks, 3 Points Equidistant)
Feed Force (Pusher Torque):               Max 750 N, Adjustable
Forward Feed Rate:                        2360 Inches/Minute Max, Adjustable
In-Feed Rate:                             0-1650 Inches/Minute Max, Adjustable
Power Consumption:                        5.5 kW - (6 kVA)
Operating Voltage:                        230V/60Hz 3-Phase
Control Voltage:                          24V DC
Oil Capacity:                             80 Liters (22 Gallons)
Oil Viscosity:                            ISO 150 cST
Compressed Air Supply:                    6 Bar (90 psi)
Compressed Air Consumption:               Approx. 10 Liters Per Loading Cycle
Machine Weight (Without Oil):             8,200 LBS

RETURN to listing display       RETURN to our home page