MTA TRACER, 4-20MM x 12, For Swiss Type Sliding Headstock   Our stock number: 397494

MTA TRACER, 4-20MM x 12, For Swiss Type Sliding Headstock

Click on picture below for larger version
MTA TRACER, 4-20MM x 12, For Swiss Type Sliding HeadstockMTA TRACER, 4-20MM x 12, For Swiss Type Sliding HeadstockMTA TRACER, 4-20MM x 12, For Swiss Type Sliding HeadstockMTA TRACER, 4-20MM x 12, For Swiss Type Sliding Headstock
MTA TRACER, 4-20MM x 12, For Swiss Type Sliding HeadstockMTA TRACER, 4-20MM x 12, For Swiss Type Sliding HeadstockMTA TRACER, 4-20MM x 12, For Swiss Type Sliding Headstock

General Specifications As Per Brochure

Electrical:                               200/220V
Air Pressure Range:                       5-7kg/cm2
Weight (Approx.):                         1,800 lbs
Capacity Set:                             4-20MM
   Note:  Bar dia above 3/4" - .787" may need bar ends turned down for
          pusher collets
Telescoping Nose w/Mounting Bracket
Automatic Remnant Retract
(1) Pusher Collet (choice of size required @ time of order)
30 Liters (7.5gal) Hydraulic Oil is Required for Operation Type ISO CB100

FEATURES:
---------
SPACE SAVING DESIGN (Approx 14'10" l x 17" w)
Accepts 12' barstock (round/hex/square) (randon & shorter lengths also)
   (Ex. - cap would equal 24pcs/10mm bars x 12' (288 linear feet)
HYDRODYNAMIC GUIDE CHANNEL, patented new channel design buffets sound,

metallic components for max. wear resistance, absorbs vibration & noise,

allowing for smooth and stable high speed turning operations throughout the

range.
   (No changeover of channel/pusher required in this range)
SYNCHRONIZATION DEVISE is electro-mechanical, directly connected, which allows

for fast forward & back movement of headstock without feeding pressure and

minimum bar distortion (threading or pecking operations)
DUAL ANTI VIBRATION DEVICES, #1 internal to barfeed & #2 is attached to

sliding headstock, both are pneumatically operated 'roller wheel' type and

work in conjunction with telescoping nose between barfeed & sliding headstock

to minimize bar 'whip' which ensures machined component accuracy.
MITSUBISHI ELECTRICAL CONTROLS & COMPONENTS including powerful PLC w/data bank

software permit accurate control for position, speed and torque.  Multi-

language control system, highly accurate servo positioning system.
LED LIGHTS along the front (+ back) outside length of sheet metal coverings,

display operation status, remaining bar length & bar loading/operational

functions.
SELF ADJUSSTING PNEUMATIC GRIPPER means there is no need to adjust for bar

size when clamping.
HAND HELD REMOTE controller provides flexibility and mobility for test and

parameter adjustment.
INTERFACING is convenient with all CNC Swiss type lathes via 24 pin connector.

Originally configured for a Nomura 20mm CNC Swiss Lathe

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page