Click on picture below for larger version

General Specifications per brochure:

Technical Specifications
Bar Diameter:                          1/8" to .787" (3 mm - 20 mm)
                                       1.02" (26 mm) max. with bar preparation
Magazine Capacity:                     10.6" (270 mm)
Model:                                 12'
Air pressure:                          5-7 kg/cm (90-100 PSI)
Oil: ISO 100/ 28 liters
Power supply:                          220V / 3 phase / 5 amps
                                       (other voltages available)

Weight:                                1,210 lbs
Dimensions:                            4495mm x 513mm x 3790mm
                                       177" x 21" x 149"

Features:
Hydrodynamic support of the revolving bar
2 minute setup for partial changeover
8 minute or less complete changeover
Quick change guiding channels and pushers
Ultra-light Remote Control Pendant (HMI) for easy setup
AC servo motor for pusher control
Automatic Torque and Speed Adjustment by easy programming
Automatic hydrostatic two-position front stabilizer, quick and easy manual

adjustment to bar diameter
Remnant Retraction System - bar end is extracted from the lathe and deposited

into a storage drawer
Easy manual diameter adjustment for magazine bar selection fingers (no tool

required)
High speed electronic headstock synchronization monitored by servo drive
Swiss safety connection for sliding headstock machines
Accommodates left or right spindle machine configuration
Optional Z-axis retraction and adjustable 2-position for non-guide bushing

applications

Base Unit                                                  $16,500

1/8" to .787" (3 mm to 20 mm) 1.02" max. 
(26 mm) with bar preparation diameter x 12' 3" bar length 
(Right or Left load available)
- 1 Guiding Channel Set with Pusher
- 1 Reduction Tube or Spindle Liner
- 1 Remnant Retract Collet (please specify stock size)
- High Speed Electronic Headstock Synchronization System
- Custom Electrical Cable Package with Plugs
- Manual Front Stabalizer Bar Support

PERFORMANCE PACKAGES

5/8" (16 mm) lathe capacity (complete package):            $20,900 
Including: 3 Guiding channels (17, 14, 11 mm I.D.), 
3 collets, 2 reduction tubes or spindle liners

3/4" (20 mm) lathe capacity (complete package):            $20,900
Including: 3 Guiding channels (23, 17, 11 mm I.D.), 
3 collets, 2 reduction tubes or spindle liners

.984" (25 mm) lathe capacity (complete package):           $20,900
Including: 3 Guiding channels (27, 21, 14 mm I.D.)
3 collets, 2 reduction tubes or spindle liners

GUIDING CHANNEL SET SELECTION CHART


Spindle Bore Dia   27     23     21     19     17     14     11    8
Guide Channel Dia  27     23     21     19     17     14     11    8
Bar Stock Range    14-23  13-20  11-18  8-16   7-14   4-10   3-8   3-5
 without Bar Preparation
Bar Stock Range    23-26  20-22  18-20  16-18  14-16  10-12  8-10  5-7
 with Bar Preparation

OPTIONAL ACCESSORIES

Guiding Channel Set, Including One Pusher:                 $1,900
Remnant Retract Collet:
-.078" - .354":                                           $ 105.00
-.393" - .866":                                           $ 130.00
-.908" - 1.259":                                          $ 160.00
-Cone For Pusher .250" - 2.050":                          $ 175.00

T-Tube Liner (one required per channel set size):          $  150
Bar feeder retraction system:                              $1,200 
   (for easy access for machine maintenance) with

safety switch
Adjustable 2-position bar feeder retraction system:        $1,250
  with safety switches (Non-guide bushing applications)
Dual Channel Safety Circuit Protection (DCS)               $  500

INSTALLATION

USA Installation (Net):                                    $3,300
Canada & Mexico Installation Price:                        $3,950

RETURN to listing display       RETURN to our home page