FAGOR 8055MC CNC CONTROLLER - 4th AXIS CAPABLE
Available in 2-axis and 3-axis
Price on request with full quotation.


The Fagor 8055 MC Control System is perhaps the most versatile CNC in

existence due to its Dual Operating System.  ISO G-code control System and
the Icon  conversational programming with interactive graphics, 

* No prior CNC programming knowledge is required to operate this control.

*** THESE BASIC ACCESSORIES ARE INCLUDED WITH EACH MACHINE ***
  Halogen Work Light
  Spring Loaded Way Covers
  Motorized Knee Power Feed
  Auto Lubrication System
  Coolant Pump & 8-Gallon Tank
  Coolant & Chip Tray
  Full One-Year Warranty


STANDARD GANESH GMV-3 CNC SPECIFICATIONS:
TABLE -
  Table Size:                           10" X 54" (254mm X 1372mm)
  T-slot width (3 Ground T-Slots)       5/8" ground reference edges (15.9mm W)

MACHINE TRAVELS & CAPACITY -
                  Travel may be reduced by CNC limit switches!
  Table Travel under CNC Control X-Axis 33.5" (850mm)
  Cross Travel - Saddle / Y-Axis        14"
  Ram Travel                            17.7" (450mm)
  Knee Travel                           16" (406mm)
  Spindle Nose-to-Table Surface Travel  2" - 18" (50 - 457mm)
  Quill Travel - CNC Z-Axis             5" (127mm) 
                                        Manual & Power Feed w/o 3rd axis
  Quill feeds - With Trip Release       0.0015", 0.003", 0.006" 
                                        (0.038mm, 0.076mm, 0.152mm)
  Quill Diameter                        3-3/8" (85.725mm)
  Ballscrew ground pitch (X & Y)        200" per rev.
  Adjustable scale ring resolution      0.001" (5mm)
  Ways -                                Hardened & Ground 
                                        Dovetail Ways in X & Z axis
                                        Square Box Way in Y-axis

SPINDLE HEAD -
  Spindle Motor                         5-HP, 3-Phase 208-240 vac
  Spindle Taper                         R-8 (#30-taper & #40-taper optional)
  Spindle Runout                        0.0002" maximum runout (0.005mm)
  Spindle Bearings                      Fafnir ABEC-7 matched set 
                                        Class-7 bearings
  Variable Speed Drive - Dual Range     60 - 500 rpm (low-range) 
                                        500 - 4200 rpm (high-range)
  Note: 6,000-RPM Spindle available w/ the optional AC Inverter Spindle Head
  Head tilt (Left-to-Right)             90 - 0 - 90 degrees
  Head tilt (Front-to-Back / Up-Down)   45 - 0 - 45 degrees
  Head Swivel                           360-degrees

DIMENSIONS & WEIGHT -
  Power Requirements                    208-220vac, 21 amps (440vac optional)
  Coolant Capacity                      8-Gallons (30 liters)
  Machine Weight                        3482 lbs. (1600 Kgs)

New Machines complete with 1-YEAR WARRANTY 

RETURN to listing display       RETURN to our home page