Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Option: These new machines are being sold as-is with pre-installation checkout
in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00

Equipped With:
   12,000 RPM Direct-Drive Beltless Spindle
   Big-Plus Dual-Contact High Performance Precision Spindle
   40-Tool High Speed Twin Arm Tool Changer
   32-GB Solid State Data Server Intergral to CNC Control
   Chip Wash Down Coolant System
   Twin Chip Augers to Push Chips Forward
   300 PSI "Through-the-Spindle" Coolant System with Deublin Rotary Union
   Full Machine Enclosure with Top Covers (precut for exhaust duct)
   Spindle Air Blast by M-Code
   Spindle Oil Cooler - Thermostatically controlled
   Remote Operator MPG Hand wheel
   High Speed Synchronous Rigid Tapping
   Dual LED High-Intensity Worklamps
   6-Thru-Tool-Coolant Pull Studs
   4th & 5th Axis Prewired with a Quick-Disconnect Connectors

Axis Travel
   X-Axis (6 Cross Roller Trucks):        63"            1,600mm
   Y-Axis (4 Cross Roller w/ 8 Trucks:    33.4"          850mm
   Z-Axis:                                33.4"          850mm
   Spindle to Rotary Table Surface:       5.9-39.37"     150-1000mm
   Spindle Center to Z Way Covers:        33.4"          850mm (Troat)

Table
   Table Size:                            68.8" x 27.56" 1,750mmx700mm
   T-Slot Width (3 T-Slots Total):        18mm           100mm Centers
   Table Load:                            5500 lbs       2500 kgs load

Spindle
   Spindle Motor:                         40 HP S3 Power 35HP 30-Min

   Spindle Speed:                         12,000 RPM

   Spindle Torque:                        90 ft-lb @ 1,500 RPM
   Tool Type:                             CAT #40 Taper

   Retention System/Holding Capability    BellVille Spring Stack (1650-1760 lbs)
   Spindle Runout:                        <0.000040" TIR
   Spindle Bearings - Rear:               110mm NSK70BNR 2-P4 Class 7 Bearing
   Spindle Bearings - Front:              110mm NSK70BNR 2-P4 Class 7 Bearing
   Retention Knob:                        C40-4502H (Coolant)

Axis Feeds
   Rapid Traverse (X,Y):                  984 IPM        25m/minute
   Rapid Traverse (Z):                    984 IPM        25m/minute
   Cutting Feedrate:                      0.4-393 IPM

   Ballscrews (X,Y,Z):                    50mm Ballscrews10mm Pitch
   Least Input Command Increment:         0.0001"/0.000040"0.001mm(40 Millionth)
   Accuracy X,Y,Z Axis (JIS6338):         +0.0002"/12"   +0.005mm Over 300mm
   Repeatability X,Y,Z Axis (JIS6338):    +0.0001"/12"   +0.003mm Over 300mm

Tool Changer
   Tool Capacity (40+1):                  40 Tool Twin Arm
   Tool Shank:                            CAT#40 Taper

   Tool Change Time:                      3.7 Seconds Tool to Tool
   Tool Diameter / w/adjacent tool:       5.90" / 3.15"  150mm/80mm
   Tool Length/Weight (from gage line):   11.81" / 15 lbs300mm/7Kg
   Tool Selection/Tool Access             Random         Bi Direction: 

General
   Coolant Capacity:                      148-Gallons    560 Liters
   Electrical - Connected Load:           75 amps        220vac+5%, 60hz
   Air Service Requirements:              85 PSI @ 14-scfm
   Machine Dimensions:                    185" x 130" x 120"470x330x260cm
   Machine Weight:                        26,455 lbs     12,000 kg


*Machine Options*

Factory machine installation: "Peace-of-Mind Factory Installation" - Includes

Expenses:                                                POR


Factory On-Site 3-Day Machine Operation and Program Training - Includes

Expenses:                                                POR


Belt Type Chip Conveyor w/ 38" Barrel Height Discharge:  POR


Substitute #40-Taper 8,000 RPM 2-Speed ZF Geared-Head Spindle:
                                                         POR


Substitute #50-Taper 6,000 or 8,000 RPM Geard-Head Spindle:
                                                         POR


Substitute #50-Taper Direct-Drive 10,000 or 12,000 RPM Spindle: 
                                                         POR


Second-Year Machine and Control Warranty:                POR


Voltage Stabilizers/Transformers (Specify Voltage):      POR 

1,000 PSI Through-The-Spindle Coolant System-Installed:  POR


Heidenhain Linear Scales for All 3-Axis - Installed:     POR

RETURN to listing display       RETURN to our home page