Click the link below to view a video demonstration of this machine
https://youtu.be/taOdwZMJIGc
"To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase."
Equipped With:
Haas Control
10 Position ATC
Floppy
=4Th Axis Ready
General Specifications As Per Brochure (To Be Verified By Buyer):
X Axis: 30"
Y Axis: 12"
Z Axis: 16"
Spindle Nose to Table (~ max): 20"
Spindle Nose to Table (~ min): 4"
Length: 47.75 "
Width: 10.5 "
T-Slot Width: 5/8 "
T-Slot Center Distance: 4.00 "
Number of Std T-Slots: 3
Max Weight on Table (evenly distributed) 1000 lb
Max Rating: 7.5 hp
Max Speed: 4000 rpm
Max Torque: 33 ft-lb @ 1200 rpm
Drive System: Direct Speed Belt Drive
Taper: CT 40
Bearing Lubrication: Grease packed
Cooling: Air Cooled
Rapids on X: 400 in/min
Rapids on Y: 400 in/min
Rapids on Z: 400 in/min
Max Cutting: 400 in/min
Max Tool Diameter: (full) 3.5 "
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 5.7 sec
Chip-to-Chip (avg): 6.5 sec
Machine: 88" x 59" x 99" 4,000 lbs
Coolant Tank: 24" x 12" x 15" 35 lbs
Motion Hours 12775
Spindle Hours 12751
