19.7"X, 17.7"Y, 13.8"Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring   Our stock number: 392381

19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring

Click on picture below for larger version
19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring
19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring19.7 X, 17.7 Y, 13.8 Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring

General Specifications As Per Brochure (Buyers are responsible for confirming

all details below)

Equipped With:
    Control iTNC 530
    Interface Ethernet
    25 GB Harddisk capacity
    Machine enclosure with polycarbon
    Chip sump
    Work area light
    Safety switches
    Vector drive spindle (high torque)
    Rigid tapping
    Optical linear scales with compressed air protection
    Liquid cooled spindle, drives, electrical cabinet
    3 user-definable M codes
    ITC (Intelligent Thermal Control)
    APS (Advanced Process System)
    Air gun
    Spindle 100-42,000 RPM, HSK-E40 (New spindle June 2015)
    36 Position Extended Tool Changer (standard on this machine is 18 ATC)
    Laser tool measuring
    Mobile electronic handwheel
    M&H measuring touch probe
    Chip sump with coolant tank and chip flushing pistol
    Tool blow-off unit
    Oil mist spray unit
    Transformer 28 KVA 3 PH 50/60 Hz

Specifications:
    Longitudinal, X-Axis:                   19.7")
    Lateral, Y-Axis:                        17.7"
    Vertical, Z-Axis:                       13.8"
    Spindle Speed:                          100-42,000 RPM
    Spindle Taper:                          HSK 40
    Feed rate/Rapid traverse (X,Y):         20/40 m/min (787/1,575 IPM)
    Feed rate/Rapid traverse (Z):           40/40 m/min (1,575 IPM)
    Clamping surface:                       21.7" x 17.7"
    Max table load:                         441 lbs
    Height of table top front floor:        38.6"
    T-slot on table:                        14 x 63 x 7 mm
    Tool Changer:                           HSK 40
    Positions:                              36
    Machine dimensions (W x D x H):         69" x 89" x 83"
    Machine weight:                         12,125 lb

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page