Featuring:
  12,000 RPM Inline Direct-Drive Beltless Spindle
  Big Pus Dueal Contact High-Performance Precision Ground Spindle
  30 Station Twin Arm Tool Changer for CAT or BT#40 Tooling
  984 IPM Rapid Rates in X & Y Axis and 787 IPM in Z For Fast Production
  300 PSI "Through The Tool" Coolant System w/Rotary Coupling
  Large Axis Travles For Big Work
  4th & 5th Axis Wiring Included w/The Machine
  4 Cross-roller Ways In The Y-Axis For Greater Capacity & Rigidity

VFM-5127 TECHNICAL SPECIFICATIONS

AXIS TRAVEL
X-Axis Travel:                            51.27" 1,300mm
Y-Axis Travel (4-Linear cross ways):      27. 56" 700mm
Z-Axis Travel:                            25. 59" 650mm
Spindle Nose to Table Surface:            5.9"- 31.5" 150 - 800mm
Spindle Center to Z-axis covers:          28.96" 735 mm (throat dimension)

TABLE Hardened & ground table & T-slots
Table Size (LxW):                         57.98 x 27.56" 1,450mm X 700mm
T-slots - 5 T-Slots:                      0.709" slot width 
                                            18 mm on 100mm centers
Max. Table Load:                          4,850 lbs 2200 kgs load for 
                                            full accuracy

SPINDLE
Spindle Motor - 12,000 rpm 1:1 ratio:     30 HP Peak 15kw 20-HP 
                                            (30-minute duty rating)
Spindle Speed - Inline Direct-Drive:      12,000rpm 
                                            (opt 24,000rpm Integral Spindle)
Spindle Torque:                           90 ft-lb @ 1,500 rpm
Tool Type:                                CAT #40 Taper (BT #40 optional)
Spindle Taper Material / Hardness:        HRC 58-62 SCM 415
Spindle Orientation:                      By sensor
Spindle Runout:                           0.000040 T.I.R.
Spindle Bearing Front:                    110mm NSK 70BNR 10 x 2 
                                            P4 class-7 bearings
Spindle Bearing Rear:                     110mm NSK 70BNR 10 x 2 
                                            P4 class-7 bearings
Retention System / Holding Capability:    Bellville Spring Stack 1650-1760 lbs
Retention Knob Specification:             #40 Japanese standard
                                            JMTBA double 45 head angle O.590"
- ANSI 5/8"-11 UNC, , O.394" neck, 1.266 tool top - head top, .990" tool top -
                                            bottom of 45 angle

AXIS FEEDS
Accuracy X, Y, & Z axis (JIS6338):        0.0002" / 12" 
                                            0.005mm over 300mm travel
Repeatability X, Y, & Z axis (JIS6338):   0.0001" / 12" 
                                            0.003mm over 300mm travel
Least Input Command Increment:            0.0001" / 0.000040" 0.001mm
                                            (40-millionths in metric)
Rapid Traverse X and Y:                   984 ipm 25m / minute
Rapid Traverse Z:                         984 ipm 25m / minute
Ballscrews - X, Y, Z:                     X, Y= 50mm ballscrews 10mm pitch 
                                            (Z=40mm)
Cutting Feedrate:                         0.04 - 393 ipm
Maximum Thrust Force:                     4408 lbs 2,000 kg
Constant Thrust Force:                    2204 lbs 1000 kg

TOOL CHANGER
Tool Capacity - 30+1:                     30 Tool Twin-Arm
Tool Shank:                               CAT#40 Taper (BT#40 optional)
Tool Change Time (average):               1.7-seconds tool-to-tool
Maximum Tool Diameter / w/adjacent tool:  5.90" / 3.15" 150mm / 80mm
Maximum Tool Length:                      11.81" 300mm
Maximum Tool Weight:                      15 lbs. 7kg
Tool Selection / Tool Access:             Random access Bi-directional

SPECIFICATIONS
Air Service Requirements:                 85 psi @ 14-scfm
Coolant Capacity / Pressure:              134 gallons / 300 PSI 510 liters
Connected load electrical requirement:    220vac  5%, 60-Hz 75-Amps
Floor space requirements (L x W x H):     146" x 130" x 119" 370x330x260cm 
                                            (+ 48" for conveyor)
Shipping dimensions (L x W x H):          126" x 92" x 101" 318x231x256cm
Machine Weight:                           19,841 pounds 9,000 kg

RETURN to listing display       RETURN to our home page