General Specifications As Per Brochure

Max. Pressure:                           100 Bar

                                         1500 PSI

Coolant Volume:                          Automatically Variable
                                         24 - 120 Liters / Minute
                                         9 - 31.5 GPM
Tank:                                    480 Liter / 126 Gallon
Filtration:                              Dual Parallel Bags
Outlets:                                 3



The GV3-120 can operate as three completely independent 40 liter (10.5gpm)
modules or combine to give you high pressure AND very high volume (120 liters)
to one outlet at any time during the same program!


Standard Configuration:

The ChipBLASTER GV3-120 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. 

When the machine tool calls for coolant, the filter pump(s) draws the coolant

from the ChipBLASTER tank and pumps through the post (safety) filter to the

inlet of the positive displacement pump. The coolant then flows at high

pressure through a series of distribution and safety valves and on to the

machine tool.

M Code Requirement:
  1 "M" Code Controlled Signal is Required to Operate as One High Volume

  Outlet.
  3 "M" Code Controlled Signals are Required to Operate as Three Independent

  Modules

  4 "M" Code Controlled Signals are Required to Operate as Three Independent

  Modules AND One High Volume Outlet
* If your machine uses pulsed M Codes, please contact ChipBLASTER.


Required Electrical Power:
  82 amps, 230 VAC, 3 Phase, 60 Hz
  41 amps, 460 VAC, 3 Phase, 60 Hz
  49 amps, 400 VAC, 3 Phase, 50 Hz

Ideal for Machine Tools Up to 60 Kw (80 HP), Dual Turret Lathes & 50 Taper

Mills.

See brochure for more information and options.

      RETURN to our home page