Click on picture below for larger version

General Specifications As Per Brochure

Max. Pressure:                           80 Bar
                                         1200 PSI
Coolant Volume:                          Fixed Rate System
                                         60 Liters / Minute
                                         16 GPM
Tank:                                    380 Liter / 100 Gallon
Filtration:                              Dual Parallel Bags
Outlets:                                 2

The J2-60 operates as two completely independent 30 liter (8 gpm) modules for

dual turrets or as a single 60 liter (16 gpm) fixed volume unit.


Standard Configuration:
The ChipBLASTER J2-60 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral380 liter (100 gal) tank.

When the machine tool calls for coolant, the filter pump(s) draws the coolant

from the ChipBLASTER tank and pumps through the post (safety) filter to the

inlet of the positive displacement pump. The coolant then flows at high

pressure through a series of distribution and safety valves and on to the

machine tool.

  1 "M" Code Controlled Signal is Required to Operate as One High Volume

  Outlet
  2" M" Code Controlled Signals are Required to Operate as Two Independant

  Modules
24 VDC, 110 VAC or 240 VAC Signal is Acceptable
*If your machine uses pulsed "M" codes, please contact ChipBLASTER

Required Electrical Power:
  56 amps, 230 VAC, 3 Phase, 60 Hz
  28 amps, 460 VAC, 3 Phase, 60 Hz
  35 amps, 400 VAC, 3 Phase, 50 Hz

Ideal for Machine Tools Up to 30 Kw (40 HP), Dual Turret Lathes & 50 Taper

Mills.

See brochure for more details and options.

RETURN to listing display       RETURN to our home page