Click on picture below for larger version

Equipped With (Buyer Must Verify All Details Below):

Quick-Change Wedge-Type size DA (5" wide) toolpost & 5-toolholders:
   *(1)Turning/Facing                  *Boring/Turning/Facing
   *H-D Boring                         *Cutoff/Grooving
   *Knurling/Facing/Turning
Fanuc 0i-TD
15.74" Steadyrest (60-400mm)
Tailstock
Hi-Pressure Coolant System
Chip Conveyor - Front belt type
Dead Center
3-Color Machine Status Light
Operation Manual
Work Light
MPG Hand Wheel
Leveling Pads & Tool Box


Specifications:

Swing over Bed:                        44" (1,118 mm)
Swing over Cross Slide:                27.60" (700mm)
Gap Opening Width:                     23.43" in front of spindle face (595mm)
Distance between centers:              78" - 236" available (2000 - 6000mm)
Bed Width:                             32" (810 mm)
Max workpiece wt cap (Chk only):       6,600 lbs
Max workpiece wt cap (Chk & Stdy Rest) 15,400 lbs
Max weight cap (Chk, Stdy & Tailstock) 19,800 lbs
Spindle Motor:                         30 HP
Spindle Speeds:                        6-420 RPM
Spindle Bore:                          6"
Spindle Nose:                          A2-11
Spindle ID Taper In Spindle Nose:      MT-6
Cross Slide Travel:                    23.62" (600mm)
X and Z axis Rapid Feed Rate:          196"/min (5000 mm/min)
X and Z axis Cutting Feed Rate:        118" / min (3000 mm/min)
Turret Tool Stations:                  8-Station turret w/mix of ID & OD tools
OD Tool Size:                          32mm X 32mm (1.25" X 1.25")
ID Tool Holder Bore:                   50mm (1.97")

RETURN to listing display       RETURN to our home page