45" x 160" cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post   Our stock number: 402845

45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post

Click on picture below for larger version
45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post
45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post45 x 160 cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Equipped With:
   Headstock Clutch
   Removable Gap
   Hardened and Ground Single Piece Bed Casting
   Hardened and Ground Cross Slide Ways
   Universal Gearbox w/ Safety Clutch
   4-Position Tool Post
   2-Speed Hardened and Ground Tailstock Quill
   Low Volt Controls
   6-Way Rapid Traverse
   Flood Coolant System
   Automatic Lubrication to Bed & Cross Slide Ways
   Electro-magnetic Spindle Break
   Halogen Work Light
   Thread Chasing Dial
   Steady Rest w/ Roller Jaws

General Specifications:
   Swing Over Bed:                        45.9"
   Swing Over Cross Slide:                33"
   Swing Over Gap:                        63.4"
   Center Height:                         23.2"
   Gap Width From Headstock:              23.6"
   Spindle Bore Diameter:                 6"
   Distance Between Centers:              160"
   Main Spindle Motor:                    30 HP
   Spindle Speeds (18-Speed):             5 - 630 RPM
   Bed Width With, w/o Auxiliary Guide:   28.1", 31.5"
   Cross Slide Travel:                    31.5"
   Compound Rest Travel:                  19.7"
   4-Way Tool Post Width:                 10"
   Longitudinal Feed:                     0.0018" - 0.1" IPR
   Cross Feed:                            0.0009" - 0.05" IPR
   Longitudinal Rapid Feed:               78.7 IPM
   Cross Rapid Feed:                      50 IPM
   Tailstock Quill Diameter:              5.7"
   Tailstock Quill Travel:                7.9"
   Tailstock Quill Inner Taper:           MT #6
   Tailstock Bearing Surface of Bed Ways: 23.6"
   Electricals:                           480V / 3 ph / 60 Hz

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page