Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct. It

is the buyer's responsibility to confirm all details and we encourage an

inspection of the machine(s) and accessories prior to purchase.          

Equipped With:
   Mazatrol Matrix 2 Conversional Control
   Mazak Flex GL-200F Gantry Load (D3 Hand)
   B-Axis Milling Spindle
   Y-Axis
   Live Milling
   Full C-Axis
   Left & Right Turning Spindles
   10" 3-Jaw Kitagawa (B-210X) Hydraulic Chuck on Left Spindle
   10" 3-Jaw Kitagawa (BB210) Hydraulic Chuck on Right Spindle
   Through Spindle Coolant
   B-Axis 0.0001 Degree Contouring
   Absolute Positioning
   Chip Conveyor
   Simultaneous 5-Axis
   Automatic Chuck Open & Close (Both Spindles)
   Chuck Air Blast (Right Spindle)
   Ballscrew Coolers (X-Axis)

   Cutting Hours:                         2,997

Control Options:
   Thread Start Point Compensation
   ROT-Axis Shape Compensation
   Thread Cut-Speed Override
   Polar Coordinates Input
   3D Coordinate Rotation
   Gantry Robot Control
   Tilted Working Plane
   EIA 3D Compensation
   EIA Herical Tap Cycle
   Sub C-Axis Control
   Synch. Mill Tapping
   EIA Pattern Cycle
   Flash Tool
   Geometric
   Re-Thread
   Rotation
   Scaling
   Thread Spiral
   G54.1
   EIA

General Specifications:
   Swing:                                 25.9"
   Turning Diameter:                      25.9"
   Turning Length:                        59.8"
   Distance Between Centers:              61.8"
   X-Axis Travel:                         24.21"
   Y-Axis Travel:                         9.84"
   Z-Axis Travel:                         62.4"
   B-Axis Travel:                         240 Degrees (-30/+210)
   C-Axis Travel:                         Full C-Axis (Both Spindles)
   W-Axis Travel:                         61.5"
   Rapid Traverse Rate (X & Z):           1969 IPM
   Rapid Traverse Rate (Y-Axis):          1575 IPM

Turning Spindle:
   Spindle Nose:                          A2-8
   Spindle Speed:                         4,000 RPM
   Spindle Motor:                         40 HP (Left) / 35 HP (Right)
   Spindle Bore:                          3.59"
   Bar Capacity:                          3.15"
   Chuck Size:                            10"

B-Axis Milling Spindle:
   Spindle Motor:                         30 HP
   Spindle Speed:                         12,000 RPM
   Tool Holder Type:                      CAPTO C6
   Tool Positions:                        72
   B-Axis Travels:                        240 Degrees (-30/+120)

RETURN to listing display       RETURN to our home page