Tsugami MB-38SY, Fanuc LH1, 1-1/2", 2005, 2x8 Pos Trrt, 6-Axis, Sub, short Iemca   Our stock number: 398331

Tsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short Iemca

Click on picture below for larger version
Tsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short IemcaTsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short IemcaTsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short IemcaTsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short Iemca
Tsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short IemcaTsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short IemcaTsugami MB-38SY, Fanuc LH1, 1-1/2 , 2005, 2x8 Pos Trrt, 6-Axis, Sub, short Iemca

Click the link below to view a video of this machine

General Specifications As Per Brochure (Buyers are responsible for confirming

all details below)

Equipped With:
    Iemca Prodigy 551 E short Bar loader
    Mist Collector
    High Pressure Collant System
    Misc Tooling


Note: the MB-38SY is a 6-Axis bar machine with an 8-station, 2-axis turret

front side, and an 8-station 3-axis turret rear side, which can operate

simultaneously and independently, driven tool capability on all stations on

rear turret. Plus a heavy duty sub-spindle unit for simultaneous main side,

sub side machining


Control:                                    Fanuc LH1
Simultaneous Control Axis:                  6 (2+4)
Least Inpur Increment:                      0.0001 in (Diameter for X-Axis)
Stock diameter:                             1.500"
Max. machining length:                      4.92"
Max. drilling dia.:                         .63" in 1045 Steel
Main Spindle:
    Max. tapping size:                      1/2" in 1045 Steel
    Number of spindle:                      1
    Spindle speed:                          60 to 6,000 Rpm
    Height of Spindle center:               39.37"
    Motor output:                           7.5/11 kW (10/14.7 HP)
    Cutting torque:                         35 N m
    Spindle indexing:                       5 deg (72 div.)
    Chuck type:                             Collet Chuck (Draw / toggle type)
Turrets:
    Number of turret:                       2
    Number of mountable plane:              8 surfaces, 
                                            2 tool locations per surface
    Indexing time:                          T1: 0.2 sec/pos. T2: 0.3 sec/pos.
    Idle time (Chip to Chip):               T1: 0 to 1.5 sec T2: 0 to 1.7 sec
    Indexing method:                        Servomotor
    Max. speed of drive axis:               T2 Turret 5,400 Rpm
Sub Spindle:
    Spindle speed:                          60 to 6,000 Rpm
    Motor output:                           3.7/5.5 kW (5/7.5 HP)
    Cutting torque:                         14 N m
    Spindle indexing(Op.):                  5 deg. (72 div.), C-axis Opt.
    Chuck type:                             Collet Chuck 
                                            (Push with toggle type)
Stroke:
    X1,X2:                                  3.15"
    Z1:                                     3.937"
    Z2:                                     5.51"
    Y(T2 turret):                           3.15"
    Z3:                                     11.22"
Rapid Traverse:
    Z1,Z2:                                  787 Ipm
    X1, X2:                                 472 Ipm
    Z3:                                     787 Ipm
    Y:                                      394 Ipm
Dimensions (approx) L x W x H:              139" x 81" x 70"
Weight (Approx.):                           11,500 lbs

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page