Click on picture below for larger version

Featuring:
  17" Swing Diameter
  21" Turning Length
  3" Bar Capacity
  12 Station VDI-40 "Quick-Change" Tool Turret w/7HP Milling
  Y-Axis w/4" of Travel +/- 2" Off of Centerline
  C-Axis w/Full Contouring Capability
  Programmable Tailstokc w/MT #5 Programmable Quill
  10" Hydraulic 3-Jaw Lathe Chuck w/Set of Soft Jaws
  Chip Conveyor and Chip Cart Included w/Machine
  Parts Catcher
  Renishaw Tool Probe

General Specifications As Per Brochure (must be verified by buyer):

GANESH KSL-7612 TMY CNC LATHE SPECIFICATIONS:

CAPACITY
Swing over bedways:                     17.7" (450 mm)
Maximum turning diameter:               12.6" (320 mm)
Maximum turning length:                 21.6" (550 mm)
Between centers distance:               30.5" (775 mm)

SPINDLE
Spindle nose/Spindle bearing NSK NN3026 A2-8 / 4-ball bearing spindle
                                          w/double roller bearing
Bar capacity / Spindle bore:            3.07"O (78 mm) / 3.58"(91mm)
Spindle bore diameter/bearing diameter: 3.58" O (91 mm) / 130mm internal
                                         bearing diameter
Maximum spindle speed:                  3300 RPM (3,000 RPM when using 12" ck)
Spindle motor horsepower:               30-HP Peak
Spindle center height:                  48.5" (1230mm)

TOOL TURRET Rated for 700-PSI coolant pressure
Number of turret stations:              12 Any combination of 12 ID, OD
                                          or Live tool stations
Tooling type/(toothed-rack cross bolt on top)
                                        VDI-40 DIN 5480 (axial Type-A face
                                          mounting tool turret)
Driven tool holder specification:       DIN 5480 - Spline drive driven tool 
                                          coupling (Sauter type)
Driven tool motor power / speed:        7-HP with 14.75 ft. lbs. of torque
                                          (20 nm) / 4,000 RPM
Turret index time (adjacent tool):      0.8 seconds
Turret disk diameter:                   17.32" (440 mm)

AXIS SPECIFICATIONS
X - Axis Travel / Ballscrew diameter:   10.27" (270 mm) / 40mm x 8mm pitch
                                          ballscrew
Z - Axis Travel / Ballscrew diameter:   23.62" (600 mm) / 45mm x 8mm pitch
                                         ballscrew
Y - Axis Travel / Ballscrew diameter:   4" Y-axis travel = +/-1.97" (+/-50mm)
                                          / 36mm x 8mm ballscrew
Rapid Travers Rate - X-axis:            787 ipm (20 m/minute)
Rapid Travers Rate - Z-axis:            787 ipm (20 m/minute)
Axis Servo Motor Power - X,Y,Z axis:    4.7 HP (3.5kw) Mits servo motors
Maximum Cutting Feedrate:               394 ipm (10 m/minute)
Minimum Programmable Input:             0.000039" (0.001mm)

TAILSTOCK (Programmable) Tag-Along Style. M-code pin-coupled to turret for
  positioning
Quill Stroke / Quill Thrust:            4.92" (125 mm) / 2975 lbs. ( 1350kg)
Quill Diameter:                         3.74" O (95 mm)
Quill Taper:                            Morse Taper MT-5

MACHINE SPECIFICATIONS
Connected Electrical Load:              48KVA - 125amps @ 220 VAC  5%
                                          service
Pneumatic Requirements:                 Air service is not required for
                                          this machine
Coolant Tank Capacity:                  32-gallon tank w/ dual coolant
                                          filtration
Coolant Pump - Flood Coolant:           HP High Flow - Headwall flood
                                         coolant
Coolant Pump - Tool Turret:             1-HP / 50 PSI - tool turret coolant
                                         (Walrus TPHK2T3-3)
Coolant Pump - High Pressure Option:    3-HP / 150 PSI - tool turret coolant
                                         (Walrus TPR2-9A)
Automatic Metered Lubrication system:   3-6cc /15-minute (adjustable
                                         lubrication flow rate)
Operator Door Access Width:             31" door opening width for E-Z
                                         operator access
Machine Weight (approx.):               15,470 pounds (7000 kgs)
Machine Footprint ( W x D x H ):        125" x 82" x 81" (add 34" for chip
                                          conveyor
Warranty - Standard (extended warranty available) 3-year control warranty
1-year machine warranty

GANESH KSL-7612 TMY Productivity Package $149,990.00

Productivity Package Includes:
  10-Piece Start-Up VDI Tooling set
  Chip Conveyor and Chip Cart
  Tailstock
  Live Center
  Parts Catcher
  Renishaw HPGA-LP2 Push-Button Tool Probe
  Barloader Interface
  10" 3-Jaw Chuck w/ 3" Through-Hole (TF3X-10)

RETURN to listing display       RETURN to our home page