|
"To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase."
Equipped With:
FMB Turbo 338 Magazine Bar Loader, 12' cap.
Part Conveyor
Chip Conveyor
High Pressure Coolant
Run Time Approx 17,800 hours (1-shift/day)
General Specifications from Manufacturer's Brochure:
Control: Fanuc 0i-TD
Axes: X1, Y1, Z1, X2, Z2, C1, C2
Working barstock diameter: 8 - 32mm
Max Machining Length: 100mm
Max Main Spindle Drill Diam: 13mm
Max Main Spindle Tap Diam: M12
MAx Back spindle chucking diam: 38mm
Max. back spindle drilling diameter 12mm
Max. back spindle tapping diameter M12
Max. cross drilling diameter 10mm
Max. cross tapping diameter m8
Max. tool spindle slotting cutter dia. 45mm
Max. back drilling diameter 8 (op)
Max. back tapping diameter M6 (op)
Main spindle speed 200-6000 rpm
Back spindle speed 100-7000 rpm
Tool spindle speed 200-5000 rpm
Total tool storage cap( St/Max.: Op.) 20/31
Tool size 20 x 20 x 125mm
Rapid traverse rate 45m/min X1, Y1
24 m/min Z1
32m/min X2
Controlled axes (linear axes) 5
Main spindle 7.5 / 11kW
Back spindle 3.7 / 5.5 kW
Axis 1.2 kW Z1
.75 kW X1, YY1
2.5kW X2, Z2
Cross Drill: 1.0 kW
Coolant pump 0.4 kW
Lubricating oil pump 3 W
Net weight 4600 kg
Power source requirment 30 kVA
Compressed air requirement 4 MPa or above
Air discharge rate 100 NL/min
Coolant tank capacity 195 L
Width x depth x height 2620 x 1345 x 1970 mm
Machine: 120" x 60" x 78" 10,141 lbs
Coolant System: 43" x 24" x 38" 546 lbs
Iemca Boss Barfeed: 114" x 33" x 52" 2,500 lbs
Chip Conveyor: 92" x 46" x 59" 1,500 lbs
Chip Pan: 63" x 54" x 17" 252 lbs
Pallet w/misc: 48" x 40" x 29" 348 lbs
RETURN
to our home page