|
To view a video demonstration of this machine, click the link below.
https://youtu.be/yUbfGRKwhF0
To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.
Equipped With:
FMB MiniMag 20 Magazine Bar Feed
High Pressure Coolant
Tri-Mist 850 G2 Oil/Mist Collector
Part Conveyor
Signal Light
Chucker kit and guide bushing
General Specifications from Brochure:
Control: Fanuc 31iTB
No. of Controlleable Axes: 7
(X1, Z1, Y1, X2, Z2, C1, C2
Max Bar Diameter: 20mm (3/4")
Max Machining Length: 210mm (Direct Drive Rotary GB)
250 (Static Guide Bushing)
80mm (Carrier Type Rotary GB)
45mm Bushingless
Max Drilling Diameter: 10mm
Max Tapping Diameter: M8
Deep Hole Drilling Diameter: 8mm
Max Back Spindle Chucking diameter: 20mm
Max Back Spindle Drilling Diameter: 8mm
Max Back Spindle Tapping Diameter: M6
Max Tool Spindle Drilling Diameter: 6mm (front tool post/back tool post)
8mm (rear tool post)
Max Tool Spindle Slotting Diam: 30mm (T1)
Main Spindle Speed: 200 - 12000 rpm
Back Spindle Speed: 200 - 12000 rpm
Rotary Guide Bushing: 200 - 8000 (carrier type)
200 - 12000 (direct drive type)
Tool Spindle Speed: 200 - 8000 rpm
Tool Storage Capacity (std/max): 24 pcs / 35 pcs
Tool Size: 12 x 12 x 100 mm
Rapid Traverse rate: 32 m/min
(X1, Y1: 24 m/min)
(Y2: 15 m/min)
Main Spindle: 2.2 / 3.7 kW
Back Spindle: 1.5 / 2.2 kW
Tool Spindle: 0.75 / 1.1 kW (Front tool post)
1.0 kw (rear tool post)
X1-X2-Z1-Z2-Y2 Axes 0.5 kw
Y1 axis: 0.75 kW
Lubricating Pump: 3 W
Power Source Requiements: 14.3 kVA
Compressed Air Requirement: 0.4 MPa oe above
Air Discharge rate: 40 NL/min
Weight (approx): 3200 kg (7055 lbs)
Dimensions (approx): 2110 x 1200 x 1885 mm (83" x 47" x 74")
RETURN
to our home page