1" Tsugami BS26CIII, Fanuc LK-1, 2000, 9Rot/6OD/6ID/8BW, C-axis, HPC, LNS HYS Automatics & Machinery Co Inc

1" Tsugami BS26CIII, Fanuc LK-1, 2000, 9Rot/6OD/6ID/8BW, C-axis, HPC, LNS HYS Our stock number: 404287

1 Tsugami BS26CIII, Fanuc LK-1, 2000, 9Rot/6OD/6ID/8BW, C-axis, HPC, LNS HYS

Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct. It

is the buyer's responsibility to confirm all details and we encourage an

inspection of the machine(s) and accessories prior to purchase.


Equipped With:
  =LNS 3.26 Super Hydrobar

  =Part Catcher
  =LNS Turbo Chip Conveyor (rear discharge)
  =Chip Blaster J5Swiss High Pressure Coolant
   Long Parts Attachment
   Mist Collector

   Extension block for 2 extra ID Tool positions


General Specifications per the manufacturer:

CNC Control:                                Fanuc 180iS (Tsugami lK-1)
Maximum Bar Diameter:                       1.023"
Main Spindle:
   Spindle Speed:                           200 to 7,000 rpm
   Indexing:                                C-axis
   C-axis Increment:                        0.001 degrees
Tooling Set-up:
   Number of Tool Stations:                 6-OD
   Rotary Tools:                            4-Cross Driven Tools 
   End Working Tool Positions:              4 (2 can be driven)

   Backworking                              8, 3 are driven
   Maximum Speed Cross Tool T10-T12:        200 - 5,000 rpm
   Maximum Speed Cross Tool T13:            120 - 3,000 rpm 
   Driven Tool Drive Motor Rating:          1.5 HP
   Turning Tool Size                        5/8" square
Programmable Servo Axes: 
   "Z1" Main Headstock in and out:          8.21"
   "T1" O.D. Tool Slide up and down:        5.90"
   "T3" Backwork Slide in and out:          5.11"
   "X1" O.D. Tool Slide right and left:     2.00"
   "X2" I.D. Tool Slide up and down:        7.90"
   Auxiliary Slide Motion:
   "Z2" I.D. Tool Slide in and out:
   (synchronous to "Z1"):                   7.88"
Sub-spindle Specifications:
   Maximum Diameter:                        1.023"
   Maximum Drill Capacity - mild steel:     3/8"
   Maximum Tap Capacity - mild steel:       5/16"
   Speed Range (serial interface):          2,000 to 7,000 rpm
   Power Rating:                            3.0 HP
   Sub-spindle Indexing:                    5 degree increment
Horsepower of Main Spindle:                 5.0 HP

Machine:  104" x 69" x 76" 6,200 lbs
Barfeed:  101" x 40" x 45" 1,500 lbs
Chip Conveyor:  66" x 36" x 70" 1,500 lbs
Pallet Hydraulic Tank and High Pressure Coolant System  48" x 40" x 33" 750

lbs

RETURN to listing display RETURN to our home page

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax: