Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct. 
It is the buyer's responsibility to confirmed prior to purchase.


All details must be confirmed by the buyer

Equipped with (all detail must be confirmed by the buyer):
    Fanuc 32iTB Dual Path Control
    Rotary Guide Bushing, A/C Synchronous 
    Chucker Kit

    Parts Chute
    Parts Conveyor
    MP Systems 8-line High pressure Coolant System (HW8)

    TriMist 850 Mist Collection System
    LNS Turbo HM500 Chip Conveyor
    Machine Boss Tool Monitoring System

New replacement cost approx $275K as equipped.


General Machine Specifications per Manufacturer's Brochure

Number of Axes:                            8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)

Chucking Barstock Diameter:                8 - 32mm  (0.31 - 1.25")
Max Machining Length:                      320 mm (12.59")
                                             (w// direct Drive Rotary GB)
Max Drilling Diameter:                     12 mm (.47")
Max Tapping Diameter:                      M10
Max Back Spindle Chucking Diameter;        32mm (1.25")
Max Back Spindle Drilling Diameter:        10mm (.39")
Max Back Spindle Tapping Diameter:         M8
Max Tool Spindle Drilling Diameter:        8mm (.31")
Max Tool Spindle Tapping Diameter:         M6
Max Tool Spindle Slotting Diameter:        45mm (1.77")
Main Spindle Speed:                        200 - 8000 rpm
Back Spindle Speed:                        200 - 8000 rpm
Rapid Traverse Rate:                      =32 m/min (X1,Y1,Y2 24 m/min)

Tool Storage Capacity (std/max):           31/43
Stick Tool Size:                           16 x 16 x 100mm
Tooling Configuration:
    Live Cross Drills:                     7
    OD Turning Tools:                      7
    ID Tools (by sub spindle:              2
    ID/BW Tools:                           5
    BW Tools:                              4 Live + 4 Fixed

Main Spindle:                              3.7 / 5.5 kW
Back Spindle:                              2.2 / 3.7 kW
Tool Spindle:                              1.0 kW
Rotary Guide Bushing:                      1.5 / 3.0 kW
X1, Y2:                                    0.5 kW
Y1, Z1, X2, Z2:                            0.75 kW
Coolant Pump:                              400 W
Lubricating Pump:                          3 W

Power Requirements:                        21.4 KVA
Air Requirements:                          0.4 MPa or Above
Air Discharge rate:                        40 NL/min
Coolant Tank Capacity:                     180 L (47.5 gal)

RETURN to listing display       RETURN to our home page