Click on picture below for larger version

General Specifications As Per OEM Brochure (Please Verify Details);

***************** VERY LOW HOURS **************

AXIS TRAVELS
CNC Controlled Axis                  4 (X,Y,Z,&C) w/High-Performance C-axis
X-Axis Travel (Vertical Tool)        7.5" (190mm) THK (Japan) Linear Ways
Y-Axis Travel (Cross Tool)           11.4" (290mm) THK (Japan) Linear Ways
Z-Axis Travel (Sliding Headstock     6.5" (165mm) THK (Japan) Linear Ways
C-Axis Travel (Rotational Axis)      360 degrees (360,000 radial positions)

SPINDLE
Spindle Bore (Usable bar diameter)   1.25" (32mm) 
Spindle Speed Range                  100-6,000 RPM (or Hi Torque 4,000 RPM Optional)
Spindle Horsepower                   10-HP 
Spindle Center Height                38" (965mm)
Rigid Tapping on Main Spindle        Yes
Spindle Collet Type                  Traub A-32

TOOLING SYSTEM
Number and size of turning tools     6 Tool Stations of " or 12mm
  (5 stations of 5/8" Optional)
Number of Internal Static Tools      5 ID tool stations (25mm bores) 
  for tool bushings/collets
I.D. Tool Bores (Round Shank)        25mm bore for ER-20 collets or split 
  or solid tool bushings

DRIVEN TOOL SYSTEM
Number of cross working driven tools 4-cross driven tool stations 
  with ER20 collet holders
Number of end working live tools     3-axial driven tool stations with
  ER20 collet holders
Size of driven tools (round shank)   ER-20 collet capacity (1/16" - ")
  (1-13mm) diameter
Rigid Tapping with Driven Tools      YES
Driven Tool programmable range       0-6,000 RPM - stepless speed range
Driven Tool HP                       2.0 (HP) 1.5kw (Radial Live Tools)

AXIS DRIVES
Rapid Travers Rate - X,Y,&Z axis     1.181 ipm (30m/minute)
Maximum federate for thread cutting  236 (ipm (6m/minute)
Minimum Programmable Input           0.000039" (0.001mm)
C-Axis Resolution                    0.001 degree (360,000 Radial Positions)
Brushless AC Servo Motor Drive       X = 1.5HP (1KW), Y&Z =.75 HP (.5 KW)
Ballscrew diameter                   25mm double-nut NSK ballscrews

SYSTEM REQUIREMENTS
Connected Load Power Consumption     16 KVA - 42 amps @ 208-240 vac 
Pneumatic Requirements               80 - 90 psi @ 1 cfm for parts catcher
  and spindle brake
Coolant Pump Motor/ Tank Capacity    3/4 HP / 25 gallon tank with 
  dual filtration
Automatic Metered Lubrication system 3-6cc/15-minute 
  (adjustable lubrication flow rate)

MACHINE DIMENSIONS
Floor Space - L X W                  72.9" X 63.4" (1,852 x 1,611mm)
Machine Height                       75.5" (1,919 mm)
Machine Net Weight                   5,500 lbs (2,500 kgs)

Equipped With:
  Fanuc CNC Control
  Rigid Tapping 
  Line input transformer
  Misc Tooling
  Barfeed interface
  Parts Catcher and conveyor
  Fanuc CNC Control 
  Y Axis
  Full C Axis 
  Spindle Brake
  Parts Catcher
  Chip Conveyor
  Full C-Axis
  240V/3Phase/60Hz/ 30amp

Under power for your immediate inspection!

RETURN to listing display       RETURN to our home page