(New) BAR CHAMP #76-JB-3, 2HP, 360 RPM, 1/4" - 3" ROUND, 41" BAR HEIGHT Automatics & Machinery Co Inc

(New) BAR CHAMP #76-JB-3, 2HP, 360 RPM, 1/4" - 3" ROUND, 41" BAR HEIGHT Our stock number: 291994

(New) BAR CHAMP #76-JB-3, 2HP, 360 RPM, 1/4 - 3 ROUND, 41 BAR HEIGHT

Click on picture below for larger version

General Specifications As Per Brochure

Bar Capacity:
   Round:                               1/4" - 3"
   Hex:                                 2-5/8"
   Square:                              2"
Bar Height:                             41"
HP:                                     2
RPM:                                    360
Min. Part Length:                       10"
Mach. Width:                            24"
Mach. Length:                           39"
Weight (Approx):                        660 lbs
Equipped with (must be verified by buyer):
   Double Ended Chamfering
   Bundle Loading & Accumulation
   Automated Infeed of Bars
   Handles Long & Short Bars
Optional Equipment:

** Prices subject to change without notice **

Increase MAx Diameter to 3.5"..................................$  396.00

Air Operated Chucking (Actuators, Valves, & Brackets Included) $1,695.00
Variable Speed (AC Inverter with 3 HP Motor) (58 - 700 R.P.M.)
For deep chamfers on hard or difficult to machine materials ...$1,450.00
Mist Spray Coolant System (May be recommended for deep chamfers on
difficult to machine materials) ...............................$  445.00
Cutting Oil Drip System
(For deep chamfers on difficult to machine materials) .........$  695.00
Small Stock Adapter ...........................................$  325.00
(One required for each diameter to be chamfered bwtween 0.100"
 - 0.156".  No adapter required above 0.156")
Square Stock Adapter (Up To 2") (One Needed For Each Dia) .... $  325.00
Castors (Locking casters added to Base Feet)...................$  895.00
Additional Bar Support Stand, 2,000 Lb. Capacity ..............$  235.00


Turn and Chamfer Toolholder (#5279) with Inserts 
 (Fits in Standard Cutterhead)................................ $  425.00
-Replacement Inserts (TPMT 3252MF) .....................(each) $   29.00
Additional 30-Degree Chamfer Toolholder (#5069) 
 with 3/4" Carbide Insert .....................................$  345.00
-Replacement 3/4" insert for #5069 Toolholder (SNMP-643) ......$   27.00
-Replacement Insert Screw for #5069 Toolholder (0530641) ......$   16.50
Tube Head Assembly (For simultaneous ID & OD Deburring and Facing
of Tubing) This Clamps Into the standard 300-1 series cutterhead
(ID, OD, and Facing Cartridges & Inserts included) ............$  975.00
Special Toolholders (Alternate degree chamfer, Special length Turn and
Chamfer, Chamfer and Face, etc.) ..............................   Quoted

Heat Treated Crate for Int'l destinations .....................$  625.00

RETURN to listing display RETURN to our home page

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax: