|
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
Equipped with
8-Station Turret
16C Collet Nose
Part Catcher
Tool Holders Included:
(2) Single Drill Sleeve
(1) Double ID
(4) Boring Bar ID for turret
Misc drill chucks
Door Interlock
Tool Box/wrenches
General Specifications per manufacturer's brochure
AXIS TRAVEL
X-Travel 8.46" (215mm)
Z-Travel 5.98" (152mm)
Maximum Turning Diameter / Length 7.87" / 5.5" (200mm / 140mm)
Swing over Bedways 12.59" (320mm)
AXIS FEEDS
Rapid Traverse - X, Z 787 ipm (20/20m / min)
Rated Cutting Feedrate 236 ipm (6/6m / min)
Mechanical Way System - X/Z Box Ways
Turcite coated & pressure lubricated
Slant Bed Angle 20 deg Slant Bed Angle for tooling
Axis Drive Motor Power - X-axis 1.0-HP (.75 kw)
Axis Drive Motor Power - Z-axis 1-1/3-HP (1.0 kw)
Ballscrew Diameter - X, Z 32mm
Positioning Accuracy - X/Z 0.00015" (0.004mm)
Positioning Repeatability - X/Z 0.00008" (0.002mm)
Least Input Command Increment 0.0001" / 0.000040"
0.001mm / (40-millionths in metric)
SPINDLE
Spindle Nose Mount A2-5
Spindle Speed 6,000
Maximum Tapping Spindle Speed 2,000 rpm
Maximum Bar Capacity 1-1/4" (32mm)
Spindle Bore 34mm
Spindle Bearing - inside diameter 70mm (80mm optional)
Spindle Motor Power - 3.7/5.5kw (7.5-HP 5.5kw)
(10-HP 7.5kw spindle motor optional)
Spindle Motor Torque 26 ft. lbs. 35Nm
Spindle Motor Drive Coupling Belt Drive
Spindle Runout 0.000040" T.I.R.
TOOLING PLATE & TOOL SYSTEM
Tool Plate Overall Dimensions 8.66" x 36.45" (220mm x 706mm)
Tool Plate T-Slot Dimensions 21mm base & 12mm neck width,
(8mm base height /17mm total)
T-Slots 3 T-Slots on 63mm centers
Turning Tool Shank Size 20mm (3/4") square shank
Internal Tool Shank Size 32mm 1-1/4" (25mm for optional tool turret bores)
Optional Driven Tool HP (.75kw) 1-Horsepower with 2:1 speed reduction
for increased torque
Optional Drvn Tool Collet Size (1/2") 2-ER20 collets in a hydraulic
positioned upper/lower format
SPECIFICATIONS
Air Service Requirements 85 psi @ 5-scfm 5.5 Kg/cm2
Electrical Requirements -
connected load 10kva, 28-Amps 220vac 5%, 60-Hz
Coolant Tank Capacity / Motor Power 21-gallons / 1/2-HP
(80-liters / 2-amps)
Lubrication Pump 150 watts
Hydraulic Pump Motor / Pressure 1-HP / 500 PSI (.75 kw / 32-bar)
Floor space requirements (W x D x H) 81" x 64" x 64"
282x135x183cm
(+ chip conveyor)
Machine Weight 4,850 pounds 2,200 kg
Machine: 65" x 61" x 67" 4,850 lbs
Chip/Coolant Pan: 44"x 26" x 20" 170 lbs
RETURN
to our home page